unusually large amount not accepted

I ran into what appear to be a bug in Money 2002. I'm 
wondering if anyone else has seen this problem. I entered 
a new recurring bill (under Biils & Deposits) with an 
estimated amount of X. I then went to pay the bill online 
and changed the amount for this payment to about 1.4*X 
(which was a 5 digit number of $). When I went to submit 
the payment, I got a dialog box saying that the amount 
was unusually large; did I want to continue. When I 
clicked 'yes', it simply returned me to the payment form. 
I could not get it to pay the bill for the desired amount 
from the Bills & Deposit page.

I then went to the account page and entered a new 
transaction to pay the bill with the desired amount and 
was able to submit the payment without any problem. It 
appears that you can not pay a large bill from the Bills 
& Deposit page.

Any ideas about this one?

Thanks.
0
7/16/2003 4:33:03 AM
money 28651 articles. 5 followers. Follow

2 Replies
530 Views

Similar Articles

[PageSpeed] 2

"Andy Franklin" <adfranklin2@comcast.net> wrote in message
news:00dc01c34b53$5896ea40$a001280a@phx.gbl...
> I ran into what appear to be a bug in Money 2002. I'm
> wondering if anyone else has seen this problem. I entered
> a new recurring bill (under Biils & Deposits) with an
> estimated amount of X. I then went to pay the bill online
> and changed the amount for this payment to about 1.4*X
> (which was a 5 digit number of $). When I went to submit
> the payment, I got a dialog box saying that the amount
> was unusually large; did I want to continue. When I
> clicked 'yes', it simply returned me to the payment form.
> I could not get it to pay the bill for the desired amount
> from the Bills & Deposit page.
>
> I then went to the account page and entered a new
> transaction to pay the bill with the desired amount and
> was able to submit the payment without any problem. It
> appears that you can not pay a large bill from the Bills
> & Deposit page.
>
> Any ideas about this one?
>
> Thanks.


0
bjclarinet (489)
7/16/2003 1:06:21 PM
Sorry for the first blank post---must be too early.  What I was going to say
is, are you sure that it said do you want to continue?  I've found myself
clicking yes many times thinking it said do you want to continue, then when
I actually read the message, I realize that I've actually clicked yes to 'do
you want to change'.  Since I don't have any 5 figure bills to pay, I'm not
going to test this one out, but if you do have the issue again, take some
screenshots and contact support.

"Andy Franklin" <adfranklin2@comcast.net> wrote in message
news:00dc01c34b53$5896ea40$a001280a@phx.gbl...
> I ran into what appear to be a bug in Money 2002. I'm
> wondering if anyone else has seen this problem. I entered
> a new recurring bill (under Biils & Deposits) with an
> estimated amount of X. I then went to pay the bill online
> and changed the amount for this payment to about 1.4*X
> (which was a 5 digit number of $). When I went to submit
> the payment, I got a dialog box saying that the amount
> was unusually large; did I want to continue. When I
> clicked 'yes', it simply returned me to the payment form.
> I could not get it to pay the bill for the desired amount
> from the Bills & Deposit page.
>
> I then went to the account page and entered a new
> transaction to pay the bill with the desired amount and
> was able to submit the payment without any problem. It
> appears that you can not pay a large bill from the Bills
> & Deposit page.
>
> Any ideas about this one?
>
> Thanks.


0
bjclarinet (489)
7/16/2003 1:14:50 PM
Reply:

Similar Artilces:

Invoicing a partial amount on a linked sales order
We have a sales order that is linked to a PO. 1050 items were ordered, 979 were already received and the link automatically allocated and fulfilled them. 71 items are remaining to be received. The customer wants 288 of that 979 shipped now. If we remove the link, then we have to put the 288 in quantity to invoice and quantity fulfilled, and the remainder has to get put in the quantity to back order field. This makes us nervous because won't that show up as a quantity to order in the PO Generator? How can we invoice a partial receipt of items on a linked sales order better than this? ...

Unusual occurance of this error
We're getting this error, but it is not due to the usual reasons that I can find in the KB, or the newsgroups. I've narrowed it down to imported items from the old Exchange Server. It's mainly calendar appointments, but there are too many of them that re-creating them is not an easy task. If you create a new calendar item and invite attendees, there are no problems. But editing old items and resending generates this error: Subject: Undeliverable: Canceled: E-Menu Your message did not reach some or all of the intended recipients. Subject: Canceled: E-Menu Se...

sending (large) files through a socket
hi! i want to transfer (copy) a rather large file from one pc to another. the codesamples in the online help of visual studio and others i found all only send primitive datatypes or objects. so far, i am using this, but i have no idea what to send from my archive. i am also not sure what to set the buffer size (third parameter in creating the CArchive) to. client: CSocket mySocket; mySocket.Create(0, SOCK_STREAM, NULL); int retval = mySocket.Connect("192.168.0.7", 6666); if (!retval) MessageBox("Connect ging schief", "so ein M�ll", MB_OK); CSocket...

Server Error 131 during Enter Closing Amounts
I ran into this error today Server Errror 131 when trying to enter closing amounts after a blind close out. We had added a new tender type and we were advised (by ABANCO a credit card company) that a "Display Order" did not need to be set. So I left it blank (or 0) and we blind closed yesterday without problem. Today we got the Server error 131 and the enter closing amounts screen would not show and tender types except AMEX. Well solution is / was When entering tender types set a Display order number that is not equal to a tender already set up. our newly added eCheck Sale wa...

How do I select a specific amount of random values for individuals
How do I select a specific number of random values from each agent in a query or table. Case: I have a list of audits recorded in a table or query that list by agent name and claim number completed. What I want is to select a specific number of rows for each agent, but that selection be random rows for each agent. On Dec 7, 1:22 pm, I don't know?? <I don't kno...@discussions.microsoft.com> wrote: > How do I select a specific number of random values from each agent in a query > or table. > > Case: I have a list of audits recorded in a table or query that list...

PST file too large.
I'm getting a message when I move emails from one folder to another folder. I'ts something about the pst file being to large. My pst is 2gb in size. See http://www.slipstick.com/problems/repair2gbpst.htm=20 --=20 Sue Mosher, Outlook MVP Author of Configuring Microsoft Outlook 2003 http://www.turtleflock.com/olconfig/index.htm and Microsoft Outlook Programming - Jumpstart for=20 Administrators, Power Users, and Developers http://www.outlookcode.com/jumpstart.aspx =20 "Damien" <no@emailplease.com> wrote in message = news:ljqIg.75694$1Q6.58204@...

How do I break a large word document into smaller components?
I have a very large Word document (over 40 MB) that I update several times a year. I would like to break it into smaller components so that only the affected component would have to be backed up online. However, I still wish to maintain the ability to create a table of contents and index for the whole document. Is this possible and if so, what is the process to do it. I am using MS Office 2010 beta running MS Windows 7 Home Premium on a 64 bit Dell desktop. Hi RoadRoy, You can simply make multiple copies and delete whatever you don't want from each copy. For the mul...

Large diagram crash
Version: 2008 Operating System: Mac OS X 10.6 (Snow Leopard) Processor: Intel Hello, <br><br>what is wrong with excel 2008? <br><br>As soon as I have some data larger than say 10000 numbers and want to create a simple line diagram, the program crashes. <br><br>Same file on a windows vista comuter and excel 2007 takes 1 second to create the chart without worries. <br><br>I have a 2ghz macbook. with 3gb ram. I work in research and all my data is larger than 10000. <br><br>How can that be? <br><br>Thank you, <br>&...

Unable to send large attachments
Hello everyone, Currently I am using Outlook 2007 with a number of e-mail accounts (1-Exchange, 1-POP, 1-Hotmail) so in a way I have an equilibrium of accounts in one package. The problem I have is sending a large document (let's say a 1-Mb PDF file) attached on to the e-mail. What is seems to be happening is once Outlook has sent the e-mail, instead of moving the mail from the Outbox to the Sent Items, it remains there and it forms a continuing loop where it constantly resends the mail. The receiver ends up with a mail box full of multiple e-mails with large attachments. Appar...

Unusual Security Audits
be happening. At one point there was 350 audits in 1 second, the same 4 events repeated, special logon, logon, Kerberos Service Ticket Operations, Logoff. I disabled IPv6 and found things are running a little better, but I'm still getting a lot of strange logon and logoffs. Can anyone give me guidance of how to figure out what is causing this and possibly how to fix it? Thanks! Jake Here is an example of a logon event: An account was successfully logged on. Subject: Security ID: NULL SID Account Name: - Account Domain: - ...

How do I summarize unusual column data?
I have a column of data that is in the following format: 2:37:56 (2 hours:37 minutes:56 seconds) How can I have the summary cell display an average days/hours/minutes for the entire column? Thanks. Thank you so much for your quick reply! Actually, I needed average Hours/Minutes/Seconds I think the calculation is close, but it gave me 930202 day(s) & 12:56 Can you help one more time? Thanks so much! "מיכאל (מיקי) אבידן" wrote: > HTH: > =TEXT(INT(AVERAGE(A:A)),"#")&" day(s) & "&TEXT(MOD(AVERAGE(A:A),1),"hh:mm...

Unusual VLookup in 2007
Hello and Happy New Year! I am working on a special project that requires me to match file names on two different directories. Some of the file names are in another lanquage and use accent marks, etc. When I use a Vlookup, it returns no match even if I can see the file in the other list. I assume it has something to do with the accent marks, etc. Each file name also has a unique 16 digit number at the beginning. I hoped I could tell the Vlookup to match the first sixteen characters. Even though I know it is there, the formula returns NA#. My formula looks like this: =V...

Getting Meeting Acceptances Despite Being Removed From Delegates List
I was given delegate rights to view my boss's Inbox. That delegation right has since been removed, but I still get their meeting invites and meeting acceptances. This has also happened to another colleague who was given delegate rights to another colleagure. Again, the delegate rights have since been removed, but they are still getting the meeting invites and acceptances. I've searched and found references to people wanting to hide them, move them, delete them and other sorts of things, but haven't come across anyone who is still getting them despite not having the deleg...

Large fonts, Themes, and Nasty bitmaps!
I use the following code to render the arrow button from a scroll bar while using themes: DrawThemeBackground(m_htheme, pDC->m_hDC, SBP_ARROWBTN, iStateId, m_expandRect, NULL The arrow button is used on a dialog to indicate that the dialog can be expanded or collapsed. Under DPIs of 96 and 120, the arrow bitmap renders nicely. However, if I change to using "Large fonts", the bitmap is distorted and renders with jagged edges. Any ideas how to overcome this display problem? -- Gort, Klaatu, Barrada Nikto... Probably not, because the arrow is represented as a bitmap, w...

Require Tax Detail Totals to Match the Pre-Tax Amount in SOP and .
Please incorporate the Require Tax Detail Totals to Match the Pre-Tax Amount functionality into POP and SOP. I created a CR/PR on this and dev informed me this was a product suggestion. This is very important functionality for European clients in terms of producing correct VAT returns. ...

Can I save large publisher documents in smaller page increments?
I have a large Publisher 2003 document that, when saved as one file, locks up my computer. Our tech guy told me to save it in smaller parts. I was hoping to save it in 5-page increments, but that doesn't seem to be possible. Anyone have any ideas on how to do this more simply than just dragging, deleting, adding, etc.. Any assistance would be greatly appreciated. Thanks. No simple way. Obviously you can open the file, delete all but five pages, save as a new name. You can delete from the page tabs. Open the main file again delete all but a different five pages, save as a new na...

Unusual Request...
Hello All: Odd request...we're looking for an Excel sharpie who'd like to become involved with our project. Ever heard of a "virtual airline"? It's a website hobby involving Microsoft Flight Simulator, where we simulate the operations of a real-world airline as closely as possible and practical (ours happens to be a small, regional bush-flying airline situated in British Columbia). Members join, they fly scheduled flights, and we try to do all the stuff a real airline would do...which includes tracking a pilot's flight-time, keeping records, and generating "v...

Business Portal connecting to Terminal server with unusual port nu
Hi. I am trying to connect my Business Portal to our terminal server. For security reasons we are using an unusual port number (54903). When we put in just the Terminal server name in the Business Portal area in the site setting, general area for Terminal server we get a 516 error (winsock socket connection failure). if I put in the name of a different server, it works ok (opens a terminal server window). how do I have it redirect to the proper Terminal server with the unusual port number? ...

Their Salary Matrix is Unusual
Hello: We have a client who has given us their salary matrix on an Excel spreadsheet. Instead of having just three columns for Low/Medium/High, they have five columns. These columns are Min, 25%, Mid, 75%, and Max. Each of these colums has a salary (dollar figure). Is there anyway to create such a salary matrix in Great Plains HR, or are we going to have to find a way to convince the client to use a new salary matrix? Thanks! childofthe1980s ...

spell check isn't accepting my command to change to suggestion
I think I'm using Windows Vista 2007. Being computer ignorant, I don't even know how to verify that. Before changing from Windows 2000, spell check worked fine. The settings seem to be set right. Spell check will make spelling suggestions, and when I tell it to make selected changes, it makes the change BEFORE I HIT SEND, but once I hit send, the changes revert to the miss spelled word. What can I do? ...

Changing relative to absolute cell references in large block of cells
I have a large block of cells set up that I now find I need to move. The cells were originally set up as relative since I needed to do things like fill down & right, etc. But now I find I need to move that entire block of cells to another location, and of course, now the cells are referencing to cells that don't exist. I need to change the entire block before moving and I don't see any way to do that for a large set of cells. Thanks again for any help Conf. If planned properly, both relative and absolute reference normally move without problem. Possibly you are making the...

Increase the amount of columns
I need more columns in a spreadsheet. I don't need 65000+ rows. Can take rows and make them columns. My mission is to have a column for every day of the year. I need 36 columns plus a few for totals and titles... Thanks for any possible help -- Message posted from http://www.ExcelForum.com No, 256 is the max per worksheet. -- HTH Bob Phillips ... looking out across Poole Harbour to the Purbecks (remove nothere from the email address if mailing direct) "mark hansen >" <<mark.hansen.141rw8@excelforum-nospam.com> wrote in message news:mark.hansen.141rw...

Large file #3
I'm working in a file created by someone else that needs to get sent to numerous vendors, who then need to key data into it. I'm very concerned with the large file size (9.83 mb), so I've been trying different ways to make it smaller. I ran Rob Bovey's code cleaner and made sure there were no extra "used" rows or columns. There is a lot of conditional formatting that changes cell colors, and quite a few cells with borders and background colors. Will getting rid of the borders and colors help me enough to bother with? All suggestions greatly welcomed on t...

Outlook 2002 Removes Large Attachments
We are attempting to send approx 30Mb Power Point presentations. The email gets sent fine, shows up on our email server fine, but when downloading via POP3, it takes a long time (as expected) but the attachment is nowhere to be found. Smaller presentations work fine. Outlook 2003 works fine. Outlook Express works fine. I have tried on Outlook 2002 SP1 and SP3, same results. Thank you for any help! Make sure the message format is plain text or HTML (and consider disabling Word as the e-mail editor). If the message goes out in RTF and a pop client like OE downloads it, then it will ...

How can my computer accept email in xls
I get e-mails from my headquarters that comes in xls. format and my computer does not accept them. I have to contact HQ and tell them to send e-mails to me in pdf. format. There's a good chance this extremely simple technique will work: Have the sender change the file extension from xls to txt. That may be all you need to do to get around the possibly meager security. Does that help? *********** Regards, Ron "amferm@aol.com" wrote: > I get e-mails from my headquarters that comes in xls. format and my computer > does not accept them. I have to contact HQ and tell ...