Opening a unicode CSV file from Excel
I'm currently working on an application that can export data in "CSV"
format, and then launches Excel to view the CSV data. This works
perfectly ok for ascii data.
However now I have upgraded our application to use Unicode I'm running
into problems. When I export data into a unicode CSV file and launch
excel with it's path on the command line I get a "This is not a
recognized format" message. If the same file is opened manually from
Excel the same error is shown but afterwards the text import wizard is
displayed (which works ok).
Currenly the file is 16 ...Must buy new computer...Ideas?
Hello to all! Finally my over 10-1/2 year old Dell desktop's extreme
slowness has seriously gotten on my nerves and I'm now looking for a new
one. (Surprisingly, it's working pretty well otherwise...)
Maybe this isn't the right forum? But beside the usual things like RAM and
HD GBs, are there things I should be sure to have...or be careful NOT to
have on a desktop? After n ot looking into computers for over a decade I
feel like a Martian in the Earth. lol!
Also, is it possible to transfer to the new one ALL my stuff, including
programs, etc.? Do you thin...Word Won't Open with File Double-click if Word not open
I'm running Vista Home Premium SP2 on an Acer desktop system with 2 gigs of
Ram and running Office 2007. My primary internet browser is Firefox.
For the past few months I can no longer double click on a Word file (not
matter where it's stored or what it is) unless I first open up Word itself.
I get an error message (see below).
When I first purchased and download Office 2007 in 2006 there was no problem
opening up Word files with a double click and it's been that way up until a
few months ago. Opening Excel files has always and now works just fine.
Here's the ...Default properties for new folders
How does one set the default properties applied when
creating new email folders? Currently, when I create a
new folder, it is created with the AutoPreview turned on
by default. I'd like to change that do that it is left
off by default. It's something of a pain to create a new
folder and then go in to customize it's properties.
You can do this by editing the Messages view; View-> Arrange By-> Current
View-> Define Views...
You might want to define a new view yourself and apply that view on first
use of that folder.
Robert Sparnaaij [MVP-Outlook]
www.howto-o...New Email Messages
I just installed Outlook 2007 on my new PC and for some reason the new
messages I received can only be received when I press the SEND/RECEIVE
BUTTON. My Outlook at work receives these new mail messages as they are
received. So how can I configure the system to make that happen?
The Trail Hiker!!
There are two settings within the accounts
1) Send on starting
2) Auto send/receive every xx minutes - set this for 10 minutes
"hiker0531" <firstname.lastname@example.org> wrote in message
>I just installed Outlook 2007 on my n...Unable to open "New" window to write email.
I am using Microsoft Outlook in Office 2003. It has been working great until
When I click "New" to write a new email I get an error window :
The messaging interface has returned an unknown error. If the problem
persist, Restart Outlook.
I have tried this several times, even restarted the computer to no avail.
Anyone have a solution????
...Prevent new comments on old posts in sharepoint blogs
How do I stop comments on certain posts in a SharePoint blog?
I have removed permissions to the specific post to the lowest possible
access and people can STILL post a comment. If I uncheck one more item in the
list of permissions, the users can no longer see the post.
...Hours not adding correctly in Resource View
For one of my resources, hours are not adding correctly when I am
looking in the Resource View in MS Project. For example, under one of
my resources, the total for 'Other projects and commitments' is 32h
for a particular week. However, when I expand the 'Other projects and
commitments' heading, there is a total of 40 hours on other projects.
This happens for several weeks with this resource. Is this a bug in MS
Because of an unfixed bug with the "Other projects and commitments" feature,
you do NOT see the correct Work num...Open Group Default ??? #2
Concerning Visio 2003 Std:
Can I set as a default to open groups in their own window as it does in
Visio 5 ???
I don't know of a global setting to do this. You can prevent individual
sub-shape selection for individual shapes by going to Format > Behavior >
Selection = Group Only.
You can also set the double-click behavior to open the group edit window.
Office Graphics - Visio
This posting is provided "AS IS" with no warranties, and confers no rights.
"Maseo" <email@example.com> wrote in message
news:%23...A Short Video on Adding/Editing New Customers
If capturing customers at the POS is important to you, take a couple of
minutes and watch this video. This application also allows for edit of
Global customer information in HQ installations.
Contact us for detailed info and demo.
It would be nice if you could encode the videos with a more common codec,
and not in wmv format. This requires the GTM3 codec (GoToMeeting). Windows
Media Player 11 doesn't automatically download the codec, and I'm not going
through the trouble to download and in...New Location/New setup
Currently I'm downsizing our office, and moving to a new location. I'm
running MS Server2003 as well as Exchange 2003. Once moved, I will no longer
require the server (since I am setting up a home office).
Are there currently any steps or procedures available to correctly shutdown
one office...and basically setup a home office with no exchange server.
Also I will be removing the current pc's from the Domain, and setting up a
few in a workgroup.
I would like to receive emails from the other employees for time being until
I completely cancel this email account. I already have a...How do I activate the new mail button
When I start Outlook, the "New", "forward", "reply" and "reply to all"
buttons are not active which means I can not send mail. I have no problems
receiving mail. Also, on web pages with email links, when I click on them,
the Outlook application is not launched which is almost certainly related to
this. I think I'm missing something very simple here!
Are you in a mail enabled folder? Do you have an active email account
Milly Staples [MVP - Outlook]
Post all replies to the group to keep the discussion intact. Due to
the (insert...Not Enough System Resources to Display Completely #2
I have a spreadsheet with several drop down menus. Depending upon th
screen resolution and/or Percent Zoom, I may get a "Not Enough Syste
Resources to Display Completely" error when I try to access the dro
At a screen resolution of 1280 by 1024 pixels and a Percent Zoom of 75
in Excel (or higher), I can access all the drop down menus without an
If I try decreasing the percent zoom or decreasing the scree
resolution, I start getting the "Not Enough System Resources t
Display Completely" error messages.
I want to distribute this spreadsheet to ot...Cannot Open 2002 Files in 2004
USA Money 2002.
Moved 2002 files to flash drive and tried to open them using Money 2004 and
I get this message "Type your password to access your files." The friedn I am
helping does not ever remember using a password. I guess the only option is
to use the Money 2002 program on the old hardrvie and see if that will allow
us to access the file.
The most typical case is where you are trying to switch regions.
Your second option requires that Money 2002 be installed. This sounds like
you are trying to upgrade a computer. BTW you can have multiple versions of
Mo...Style available all sheets new or old
I need a custom style that is available in all
spreadsheets, new or old. I can set style and save it in
book.xlt in xlstart, but that only works for new
workbooks, and doesn't work with old spreadsheets when I
call them up. I want to be able to select a group of
cells, or column or row and apply a setting for negative
numbers to have brackets. I am using Excel 2000.
I even tried saving the style in personal.xls, but that
doesn't work as it is hidden.
Do I have to use a macro? And if so what would it be?
Public Sub MergeStyles()
ActiveWorkbook....Sub Form Assigning New Values to Old Records
I am using a subform within a form to have users update certain fields in the
record where the rest remiain locked. On the Main form when the list box
(which is bound to a query) is used to select the record set to display in
the subform it sometimes takes an old record and assigns a new value to the
record. For example it changes the Period field from 9 to 10. Taking a
record created in period 9 and assigning a period ten to it which is the
selection I make in the list box. Addtionally, it looks like it is taking
the first record in the related table to assign this new value to. ...Which table will refresh by adding new Account / Contact
I am new to CRM and trying to update CRM Accounts and Contacts from our
Sales Management system. I am using Micorosft Bulk Import utility. I am in
preparation of CVS files but not sure what columns do I need in CVS file to
complete one Account/Contact record. Could anybody please help. I am .NET
expert developer, please let me guide If I could develop CRM by using .NET
Microsoft do provide CRM SDK for CRM enhancment using .net. You can download
from following url
http://www.microsoft.com/downloads/details.aspx?familyid=9C178B68-3A06-4898-BC83-BD14B74308C5...Adding new pages
Any thing I do on new pages happens simultaneously on any previous page. Can someone help me please?
Can you be more specific? What stencils are you using and what are you
John... Visio MVP
Need stencils or ideas? http://www.mvps.org/visio/3rdparty.htm
Need VBA examples? http://www.mvps.org/visio/VBA.htm
Common Visio Questions http://www.mvps.org/visio/common_questions.htm
"Joanie" <firstname.lastname@example.org> wrote in message
> Any thing I do on new pages happens simultaneously on any previ...Can't open Outlook #11
Just bought a new computer & copied my PST file over to it. When I go to
open the file, it asks me for my password. Problem is: I don't have a
password on the file. Any help would be appreciated.
...New trend, new business, new year a new beginning
New trend, at start of new year.
"If you want things to work different, you must try a different...whatever..." Does that seem obvious?
Brighten up with this "reading" and attack the money issue with
I am finishing my year 2005 with some regrets and some joy.
For some the year passed has not been "tip top" in their view.
But I believe it has just been very well as the page I shall bring you
that has this statement which I believe wholeheartedly:
"THINGS ARE UNFOLDING AS IT SHOULD" (paraphrased) I invite you to read the whole "poem&quo...New messages comes up in Deleted folder
Sometimes when I receive new messages the go to the
Deleted folder instead of the Inbox. The messages are
from random people...not just one sender. What is the
Check your message rules/filters. "key word" in new mail
subject line of body is probably being tagged and
filtered to deleted items folder.
>Sometimes when I receive new messages the go to the
>Deleted folder instead of the Inbox. The messages are
>from random people...not just one sender. What is the
...OWA Address List won't open
We have one user here (maybe more) who cannot open the GAL when using OWA.
Clicking 'New' to create and email, then selecting the 'To' button gives the
User host address: xx.xx.194.13
EX Address: /o=My Domain/ou=Exchange Administrative Group
SMTP Address: email@example.com
OWA version: 8.0.685.24
Mail...New User has admin rights
I just created a new user and assigned her the role of Sales Manager. This
role is working correctly for other users with it assigned, but she has admin
This is the only role she has assigned....
...Creating new row in other table
Please teach me, how to make a new row/list in other table by entering
number in other table. Sample, In the table A and in the field "Details", I
put the number 2 and it automatically creates two rows in table B. Can this
be done in MS Access? Thank you for your help.
Why? What business need are you attempting to solve with this approach?
It's generally considered not very good database design to be creating
'empty' rows in a second table. Why do you want empty rows?
And if the number you enter in TableA is a 'limit&...AP
What would be the best tool to add a new field in the AP invoice screen to
deploy to a client? Extender? Modifier?
the ideal would be to add a field for "Job No." that is text info so the
user can get some info out on certain jobs that they are paying bills for.
You can use any tool, really, to accomplish this:
- Modifier with VBA. You can add the fields to the window with Modifier,
then use VBA and ADO or DUOS to store and retrieve the data.
- Modifier with Dexterity. You can add the fields with Modifier, then
trigger off the form with Dex...