Outlook using imap is receiving but not sending
Messages are being put in Sent folder and Send/Receive shows no errors but
emails are not actually getting sent. This is a new install of Outlook on a
new computer. Have I messed up the setup?
"Theatre Girl" wrote in message
> Messages are being put in Sent folder and Send/Receive shows no
> errors but
> emails are not actually getting sent. This is a new install of
> Outlook on a
> new computer. Have I messed up the setup?
IMAP is not a sending protocol. It is used for receiving mails (out
of your ...Line charts using temperature and time factors
I want to create a line chart showing comparisons of heating and time. For
example one item is held @ 30deg for 10secs then 100degs for 30secs while the
comparison is plotted to show the difference. Help appreciated.
try x-y scatter chart data-columnwise.
Excelon_Ls <Excelon_Ls@discussions.microsoft.com> wrote in message
> I want to create a line chart showing comparisons of heating and time. For
> example one item is held @ 30deg for 10secs then 100degs for 30secs while
> comparison is plotted to show the diff...VBA: move to the next cell down from anywhere in the sheet
I am deleting rows based on a value in a column (< 16) and if the valu
is 16 or greater I want to move down to the next row and check tha
value and so on. i am using a Do Until value = "".
What is the code for moving down to the next cell below ActiveCell
jmp's Profile: http://www.excelforum.com/member.php?action=getinfo&userid=2903
View this thread: http://www.excelforum.com/showthread.php?threadid=48770
I would not recommend this though. If you want to dele...character limit in cell?
I merged several cells and entered text. I have it set
to 'wrap text' so it will all fit in the merged cells.
If the text is only 1/2 of the third row it is all
displayed. However, if I enter any more text than that
it displays as '#######'. Is there a limit on the number
of characters I can enter? Can that be changed. There
is still room in the merged cells to hold more text.
You don't seem to be getting any takers on this one. ####, to my knowledge,
shows up only when you have a number in a cell (not text), and it's too big
to display in its entir...HOW TO USE HYPERLINK within a droplist?
I have a question aabout this:
I set row A with validation list "yes/no", i want that if choose "yes",
then open a word document named "checklist.doc".
Instead of using a validation list, you could use a "yes" button and a "no"
button. The yes button can be linked to a macro to open the word document.
The no button can be linked to a macro the will type the text "Go to next
step" or something like that.
> I have a question aabout this:
> I set row A with validation list "yes...using forms
Vista Home Premium 32 / Outlook 2007
I have created some forms that used to work. No more.
On selecting a form, I get "The form required to view this message
cannot be displayed. Contact the administrator. To my knowledge, I am
the administrator. This is a stand-alone PC in my residence. If I go
to Manage User Accounts, it shows only 2 accounts - LastName
Administrator and Guest.
I have googled my problem and found references to FRMCACHE.DAT which I
am told to delete and restart Outlook. Did that. Opened Outlook and
tried to open a form. Same error. And FRMCACHE.DAT was not ...Using Spanish on Publisher
I have copied and pasted a document in Spanish from Word
to Publisher. Prompts keep coming up telling me that it
cannot "hyphenate" this document. I'm guessing that it
means since it's in another language it needs something
to be able to spell-check, etc. I really don't care
about checking the spelling, but the pop-ups keep
interferring with my arranging the flyer I desperately
need to get completed. It tells me to put in the disk
and download the "hyphenate" feature. Can I download
this from the net since I have no disks. Publisher came
with my n...Printing Problems (cells printing on top of one another)
When printing cells are merged together like the they have
been shifted up half a row height. This problem is
restriced to one user on one system (Windows 2000 Pro and
The problem is same on a single sheet workbook or a multi
sheet workbook. The printer setting keep reverting back
to 11 sheet tall by 1 sheet wide. This produces an
unclear image through print preview. You can manually
reset the default to 1 sheet wide by 1 sheet long which
corrects the print preview but not the printed output.
I avoid merged cells like the plague - full of problems.
I guess that you ...I used Omsgclas.exe Utility and my contacts don't use then new form
I created a new form for contacts. I followed the three
steps in the document How to Update Existing Items to Use
a New Custom Form. I can click on Action and do new
contact and the new form is used. I used Omsgclas.exe
utility to change the message class of the contacts. It
shows as changed. However, when I click on an old
contact (previous to changing the form), A message form
comes up (not the old contact form and not my new contact
Anyone have any help how to get my new form pulled up for
old messages? Note: I had a form with a ' in the name,
I made a new form w...Formula staying as a formula in a cell?
Does anyone know why a formula stays a formula in a cell?
I know that using the aspostrophe makes it like a string,
like '=blah+blah, but this one doesn't...I even have made
the cell General and made sure that calculate automatic
was selected. This thing is driving me nuts. Any
You can't just format the cell as general if it was text to start with. You need to format as
general AND then hit F2 and then enter. the other possibility is that you have the Formulas view
turned on in Tools / Options / View Tab / Uncheck Show Formulas in Window options.
Ideally you...FormulaR1C1 using variables
I want to do this but can't:
ActiveCell.FormulaR1C1 = "=MyFunction(R[variable]C[variable])"
What are my options?
Try something like
ActiveCell.FormulaR1C1 = _
"=MyFunction(R" & CStr(variable) & "C" & CStr(variable) & ")"
Microsoft Most Valuable Professional,
Excel, 1998 - 2010
Pearson Software Consulting, LLC
On Wed, 21 Apr 2010 13:52:01 -0700, Cheah
>I want to do this but can't:
>ActiveCell.Fo...In Excel, how do I insert User Name (author) in a cell.
The function =CELL("filename",A1) returns a file name and sheet name in a
cell. How can I obtain the User Name?
You can write some VBA to do it.
Sheets("sheet1").Range("A2").Value = Application.UserName
Excel_Geek's Profile: http://www.excelforum.com/member.php?action=getinfo&userid=26423
View this thread: http://www.excelforum.com/showthread.php?threadid=398347
And to return just the filename (if you like) you can use this for...Change range based on value of a cell
I'm trying to do a COUNTIF, but want to change the range depending on
a number somewhere else in the spreadsheet. For example, if the number
is 3, I want to count from C1:G1, but if the number is 4 I want to
count from D1:G1.
I've used the address function to find out which cell I want to start
from, and then concatenated that to the end point of the range (this
never changes). So I'm left with a cell that contains the value of the
range (C1:G1 or D1:G1) depending upon the number which is input above.
Is it possible to use this cell, which contains the value C1:G1 to
repl...Using lookup formula using more than one cell
I have a spreadsheet which lists clients by first name, last name, postcode
and phone number - all in separate columns e.g.
Andy Roberts M56 7HN 0161 428 3856
I have these all in one worksheets and in a named range called "Clients"
On a separate worksheet (within the same workbook) I log all my enquiries.
What I want to be able to do is type in to a cell the first name then in the
next cell the last name and the following cells get populated with postcode
and phone number based on BOTH of the first two cells by looking up the
I can get it...Using XML with ASP.NET
I want to know where can I find Tutorials/Articles to learn implementing XML
with asp.net. I am working on ASP.NET using C# from last one month. I have
idea about XML but had not implemented yet with ASP.NET.
Thanks in advance.
...Using secured OMA
Please help me with my misunderstanding. When I try ro connect by t68i or
z600 (WAP 2.0) to OMA directly with SSL required, using mydomain.com/oma, of
course, I get 403 error. When I use https://mydomain.com/oma I get "Couldn't
reach the indicated web server." altough it works fine with Pocket PC.
What's wrong? What should I configure to establish secured connection from
"Vit Knyshevich" <firstname.lastname@example.org> wrote:
>Please help me with my misunderstanding. When I try ro connect by t68i or
>z60...Compile error using CTypedPtrList
I am having problems at compile time using the following
CTypedPtrList<CPtrList, CString*> m_ClientList ;
When compiled I get the following errors:
emailcfgdlg.h(114) : error C2143: syntax error :
missing ';' before '<'
emailcfgdlg.h(114) : error C2501: 'CTypedPtrList' :
missing storage-class or type specifiers
emailcfgdlg.h(114) : error C2059: syntax error : '<'
emailcfgdlg.h(114) : error C2238: unexpected token(s)
I am using the version 6 of the compiler with SP5.
Now I think this is something to do with the c...Using resources, how to ?
I am using MS Visual Studio 2005 Express ( yes, the one that u can
download for free from MS website ) and I have a "little-big" problem
with my program. First of all let me say that I created a simple
console program, with his main and few functions, and I wish that my
..exe file can drop another .exe when launched.
The other exe is another compiled program, and I wish to handle it from
my main program as resource.
There are some topics about handling resources, but I cannot find
anything of good; I know how to use LoadResource, FindResource, etc,
but both fail since I am...scatter plots using pivot table data
In older versions of Excel, you could directly create xy
scatter plots using pivot table data. In Excel 2000, the
chart wizard says you can't use an xy scatter plot with
pivot table data. Why????? Is there any way around this
Don't tell the pivot table you're making a regular chart.
Select a cell away from the PT and start the chart wizard. Select the XY
Scatter type you want in step 1. In step 2, use the Series tab to select
the ranges for the names, X values, and Y values of each series in your
chart. Make sure you don't select one of the PT but...Recalc of SUM() that refers to a cell across a range of worksheets
I'm using Excel 2003 w/ SP2 and have encountered a problem I don't recall
having before. I have a workbook where a summary sheet is used to aggregate
the values in each of the cells in the rest of the sheets by using a formula
with following syntax:
where "sheet1" is the name of the first sheet in the range of contiguous
sheets, "sheetx" is the name of the last sheet in that range, "C" is the
pertinent column letter for a cell (the columns in this workbook represent
years) and "n" is the pertinent row numb...Allow temporarily use of right click
I have made a databse in which I have disabled the right-click option.
However, I have a form which opens reports, and I want to temporarily allow
(only for the opened report) the right click option so the user can save and
print the report.
I have also no clue how to create a custom menu with only a few of the normal
I hope my question is clear.
Message posted via http://www.accessmonster.com
"greeknl via AccessMonster.com" <u30909@uwe> wrote in message
>I have made a databse in which I have disabled the right-c...help with cell referencing in named ranges
I have a named range covering about 30 columns of data.
I'd like to lookup within the named range based on values
in the 1st column, and a specific date which is the label
on top of each of the other 29 columns. I have typed in a
new column number as necessary, but I'd like to automate
the column number by looking at a separate cell which
gives the date.
Ex: Dates across the top of the named range are 1/1/90,
1/1/91, etc thru 1/1/2003(in sheet1).
Lets say I have a cell in sheet2(d1)that has the date
1/1/2003. In that same sheet starting in cell a1 I have a
value which ...Using two pictures from clipart as my background
I can't seem to get more than one clipart as my background. When I try to add
another one, it overrides the first one. I want two pictures, each on half
the page, and faded. Thanks.
On Jan 13, 7:31=A0pm, Michele <Mich...@discussions.microsoft.com> wrote:
> I can't seem to get more than one clipart as my background. When I try to=
> another one, it overrides the first one. I want two pictures, each on hal=
> the page, and faded. Thanks.
You can place multiple pictures on your slide (or slide master), but
each slide can only contain one as it's ...How to use interfaces
How can you show in an UML diagram using visio that you have 1 class who
uses the interface implementet by another ??
public class MyClass : ImyInterface
//And then in another class you will do something like:
private ImyInterface imi = new MyClass();
can you show this via UML shapes in Visio ??
thanks in advance ...
Med Venlig Hilsen
...Any way to highlight cells that change?
Is there a way to highlight all of the cells in a worksheet that
change as a result of some action?
I have some worksheets with calculations that depends on other
calculations that depend on other calculations and so on. If I make a
change to one value or one formula, I may not notice if some cell
(possibly off the screen) is changed. I would like some way to make
them stand out. A border like the copy border or something like that
would be great.
Running Excel 2000 SP-3 on Windows 2000
Click the cell you have just changed (or are about to change)
On the Formula Auditing toolbar, click T...