Update for MS Money 2005?
I have Money 2005. Is there an update to MS Money for Canadian users?
Thanks in advance for any answers.
We need a bit more information! Are you having problems with M2005 or is
this just a post-Christmas/New Year random query when you are trying to get
away from the in-laws?
Microsoft MVP - Money
For unofficial FAQs see
I do not respond to any emails that I have not specifically asked for.
"Daniel" <Daniel@discussions.microsoft.com> wrote in message
news:E86EAB89-21DE-4505-ACAD-647278D736BD@microso...updating sheets based on data in first sheet
Another payroll question,
I have a workbook that contains 26 sheets, one for each bi-weekl
payroll period. I would like to set it up so when i add a new employe
the rest of the sheets also update automatically with that employee
name and information.
I have been able to acheive this to a limited degree using th
=sheet1!a1 formula, but this only updates the info in the first cel
and particularly the first column.
I would like to acheive this using the first sheet, since at th
end of the year I would like to be able to calculate ytd figure
Message posted from http://www.Exc...RMS 3.0 #2
i upgraded my service plan last year same time becuase they said rms 3.0 is
releasing soon. Should i pay the fee becuase it didn't get me anything.
any suggestions? Also rms 2.0 didn't do much except some button in po's
and created more problems. i dont think they will be releasing 3.0 anytime
Tough call I have heard from a partner that the 3.0 wont be out until endo
2009 but most likely 1st qtr 2010... Dynamics pos is the next release then
RMS 3.0...thats on the rumor mill.. take it with a grain of salt.
> i upgraded my...Problem with Script Updating
I am using a script to update the “1099 Type” field for Master Vendor table.
The script basically is a basic if-then statement. This script is run “Before
Document Commit” and it’s not updating correctly, its flip-flopping the
results. When the script is set to run Before Document Commit I have the
“Destination mapping” field “1099 Type” set to “Use Script”. Script below:
If SourceFields("Send 1099") = "N" Then
DestinationFields("Options.1099 Type").Value = 1
DestinationFields("Options.1099 Type").Value = 4
I have also tried this s...Outgoing SMTP Problem #2
I am experiencing problems sending to certain domains on new Exchange
2003 Server installation running on 2003 Server (PDC and DNS Server).
I have had similar problems on the previous setup running Exchange 2000
on 2000 and 2003 Server where outgoing SMTP did not fail over to the
next lower priority MX record of the recipient's domain. This was a
known issue and a hotfix was available.
A test SMTP connection to a recipients primary mail host did in fact
fail whereas the third highest accepted mail. Creating an SMTP connector
for this domain to that host solved the problem.
However...Publisher 2007 and Microsoft Updates
I created a newsletter yesterday - everything fine - use Publisher all the
time. Then an automatic update came down this morning and I can't open the
file - it says "Publisher cannot open file" Other documents in Publisher
are opening - any ideas?
MVP Microsoft [Publisher]
Tech Editor for "Microsoft Publisher 2007 For Dummies"
"Kim" <Kim@discussions.microsoft.com> wrote in message
>I created a newsletter yesterday - everythin...Microsoft Update only updates Windows Defender
iacrosoft Update only updates Windows Defender - I have to use Belarc Advisor
to get a list of missing updates, and then go to the Microsoft Download
Center to search for the missing updates and download and install them one at
I have Windows XP Home SP3, with Microsoft Update set to automatic download
- can anyone tell me why I do not get all the necessary upadtes?
Is this a sudden, new problem? When was Automatic Updates last working?
Can you update manually via http://windowsupdate.microsoft.com?
Any chance you've got a beta build of WinXP SP3 installed?
What...active sync says there is no microsoft outlook installed
When I tried to synchronize my pocket pc, active sync says there is no
Microsoft Outlook installed and i need to reinstall it. It is there with my
other Office product and I can add contacts and appointments. I don't
understand. Help me, please.
"rdeb" <email@example.com> wrote in message
> When I tried to synchronize my pocket pc, active sync says there is no
> Microsoft Outlook installed and i need to reinstall it. It is there with
> other Office product and I can add cont...Update question
Soory if this is the wrong place to ask this, but cannot find a NG
proper to Windows 7.
I currently run Windows Vista and am getting tired of Vista's decision
to tell me that it is going to shut down in less than a minute.
So have decided to upgrade to Windows &.
I note that I can purchase an upgrade versiom for 64 quid from Amazon
or an apparently full version of Windows 7 Home premium for 89 quid.
My question is this - If I buy the upgrade version will I only be able
to load it on a new PC in the future if I already have windows Vista
installed? i.e For any future cl...page break #2
I am working of a Excel database for my company. Somehow
while during editing a page break appeared right in the
middle of my document. I am aware that you are able to go
to "Insert" and remove a page break...yet in this
situation I am unable to do so. Any ideas of what to do or
how to fix it? Suggestions are highly appreciated.
Try working in the View "Page Break Preview." It's much easier than manually
entering breaks, and fairly intuitive. When you are through, reselect the
"kellie" <firstname.lastname@example.org>...Outlook 2003 died mysteriously after update
Setup in a nutshell...
System: Lenovo T500 laptop
OS: Vista Business SP1 32-bit
Software: Office Outlook 2003 SP3
So I'm using this setup for over a year, everything OK. Yesterday I did two
things and now Outlook dies (quietly, sans error message) immediately after
startup. It show the splash screen, displays my inbox, and *poof* disappears.
What I did earlier...
1. Windows Update installed: KB9766662, KB979306, KB979099, KB975929
2. At the same time, while searching for another program to uninstall I
stumbled upon (and uninstalled) Windows LIVE Toolbar and...Outlook Networking #2
Is it possible to have a home network (3 PC's)with
Outlook running on each and set it up so that they all
synchrionize? That is, change an entry on one pc and it
effects all three.
> Is it possible to have a home network (3 PC's)with
> Outlook running on each and set it up so that they all
> synchrionize? That is, change an entry on one pc and it
> effects all three.
Not easily...but see http://www.slipstick.com/outlook/share.htm
...login errors #2
When trying to login I am getting this error:
Login denied. An installation task of Analytical Accounting is running.
Please try again later.
Thus it will not allow me to login.
Try clearing any user stuck in SY00800
> When trying to login I am getting this error:
> Login denied. An installation task of Analytical Accounting is running.
> Please try again later.
> Thus it will not allow me to login.
> Any suggestions?
Have you tried to run Dynamics Utilities? It seems that you have an
unfinish...How update entity in post update?
I created a handler for Update post callout for Opportunity. I want update
some fields of the opportunity on the PostUpdate. However, if I call the
Update method of CRMOpportunity in the PostUpdate I will create a recursive
Can somebody help me?
Thank you for pay attention
Vin�cius Pitta Lima de Ara�jo
You need to check the OrigObjectXML field to see what fields were updated and
then act appropriately.
MVP - Microsoft CRM
On Wed, 4 Aug 2004 17:43:17 -0300, "Vin�cius ...Outlook 2003 over VPN #2
I am trying to get VPN access to an Exchange 2000 server,
with Outlook 2003 through a cable modem running on XP
Professional. Access to the VPN works, I can even set up
the client and "check the name" with no problem. But,
after loading Outlook 2003 I don't see any emails.
Normally when I would connect a machine through the VPN
(using earlier versions of outlook) I would see the users
mailbox by default.
Does anyone have any idea why I cannot see the mail in the
exchange mail box?
Are there settings, that by default, act like an account
that needs to "send/reci...Exhcnage Server 2007 Won't Install
Exchange Server 2007 Install Problem
I've setup a new Windows 2003 64 Bit Server for running Exchange 2007.
I've installed everything (twice now on separate drives) and Exchange
Server is giving me the same error:
Welcome to Microsoft Exchange Server 2007 Unattended Setup
Preparing Exchange Setup
Unhandled Exception: System.TypeLoadException: Could not load type
change.Setup.ExSetup.ExSetup' from assembly 'ExSetup, Version=22.214.171.124,
Exchange Server setup encountered an error.
...Cannot install update KB979906 for .NET Framework 1.1 SP1
Running : Windows XP media center edition SP3
Have tried installing KB979906 a few times and also downloaded update
manually but cannot install this update. Receiving error 0x643.Is it safe to
uninstall the .NET Framework 1.1 and re-install as possibly corrupt , without
having to uninstall/re-install all other .NET frameworks 2 , 3 and 3.5
including the updates that go with them? ..
you might want to look at the following kb article to see if this will help
with the error 80070643.
<http://windows.microsoft.com/en-US/windows-vista/Windows-Update-error...latest update too MSCFV2
I have MSCFV2 version 6.5.7825.0. Could someone inform me if this is the
Looks like you have 6.5.7825.0 from 05/21/2006, but there is a newer
version - 6.5.7831.0 from 06/01/2006.
Enso Technologies, Incorporated
On Tue, 13 Jun 2006 04:25:02 -0700, Paul
>I have MSCFV2 version 6.5.7825.0. Could someone inform me if this is the
Enso Technologies, Incorporated
Also - meant to post this in t...Print record once, update Yes/No field verifiying print
I would like to print a group of records, then have a Yes/No field [Printed]
updated in my Jobs table with an update query showing the records were
printed. Then next time the report runs, In my query criteria I will test
for True values on the Yes/No field. Then only the records with the Yes/No
field marked No will print. Any suggestions? Thanks
Tommyboy,there's more to this question than meets the eye.
For an explanation of what's involved, see:
Has the record been printed?
The article includes a free sample database that dem...Dynamic Menu update
I need to update a menu item dynamically, setting its SetCheck
property to either true or false, based on a user operation. I am trying to
do this from a custom function. Usually, the pCmdUI pointer is used. But how
do I do it from another function?
Your "other function" should change some setting. In your
ON_UPDATE_COMMAND_UI handler, you should check that setting and call
SetCheck as needed.
In addition to Ajay's response, this page may help you:
http://msdn2.microsoft.com/en-us/library/6kc4d8f...online updates for money2003(not updating)
Money gets its updates from spcomstock.com and the server
has moved to a new site. The default site that money
provides has to be changed. At this time I don't know how
to do this. If I find out how to do this I will Post it.
...Excel8.olb corrupt with no admin permissions #2
I've been struggling with an odd issue here for several days. Situation is
As per company directive, all users are required to members of the local
Users group on their NT or in2K workstations, and to not be members of the
Power Users or Administrators groups. With one particular user, if he does
not have admin rights on his machine, he gets an error when opening Excel
about excel8.olb or excel9.ob (depending on the version of office) being
missing and corrupt (and I have to kill the application, as the error pops
up constantly). If he's a member of the Administrators grou...Payroll Update
We are running GP 7.5. I installed SP7 and the July 2005
tax update for CDN payroll.
Now out payroll administrator gets an error message:
'The modified version of P_Payroll registry is missing'.
How do I fix this problem
...[ANN] Excel X security update
A security update for Excel X was also released today:
Or at least:
--- Mac:MS MVP (Francophone) ---
http://www.mvps.org - http://mvp.support.microsoft.com
MVPs are not MS employees - Les MVP ne travaillent pas pour MS
Remove "NoSpam" to e-mail me - Retirez "NoSpam" pour m'�crire
...HOW ABOUT AN UPDATE?
Microsoft, can we get an update on the login issue
please???? It's been a whole day since we heard from
Err, Russ sent 2 updates today. Subject line = "File Lock Update" Hope
you can find them.
"shan" <email@example.com> wrote in message
> Microsoft, can we get an update on the login issue
> please???? It's been a whole day since we heard from
> Russ last.
Look again, he posted 2 yesterday, we are still waiting
for something today...