W2K/Ex5.5 to W2K3/Ex2K3
having two separate physical machine server1(Win 2000 SP4, Ex5.5 SP4)
and server2(Win 2003, require to install Ex2003 on this server with all
mailboxes moved from server1 to server2). not sure where to install ADC,
hence installed ADC on both server1 & server2, when i try to configure and
run i get an error "server1 not an Exchange 5.5 server or an SRS service"
When i try installing E2K3 on server2, joining exchange site on server1,
unable to join it because the ADC
not working? how can i go about this.?
first of all you shoul...Re-arranging table using pivot-table?
I have a worksheet with data organized somewhat like this:
New York New York
New York Albany
California Los Angeles
California San Diego
I need to convert this to a list of states and each city in the columns to
the right of their corresponding state. Something like this:
New York New York Albany
Florida Miami Orlando Tampa
California Los Angeles San Diego
Any help is greatly appreci...Inserting new rows into sheet
I am using the following code to insert a new row onto
Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
This code will insert a new row above the current row number 5, which
is okay. My problem is that the new row has the same height and possibly
dimensions and formatting of row 4.
Can I basically tell Excel to insert a row of cells that are a default size
a size of my specification?? I dont want Excel to insert a row of cells
are the same dimensions of the above or below row. I realize that I co...Re-install Outlook 2002
I am trying to re-install Outlook 2002 for my palm pilot
after a crash. The installation will run until I get the
message - "another version is already installed and must
be uninstalled". The previous version was corrupt and I
was unable to uninstall it. Now when I go into the control
panel to add/remove the uninstall is no longer in the
...international versions of 2004
can anyone tell me how to purchase an international
version of money 2004, as the only versions available for
purchase at microsfot are us only. if the international
version is not yet available can anyone shed any light on
when this will be available for purchase?
How about Australia
>None available yet. In the UK, we have a date of 5th
September according to
>Glyn Simpson, Microsoft MVP - Money
>Check http://support.microsoft.com/default....RE:Excel will not open from a web link
When opening a link on a web page that has an Excel
Spreadsheet embedded in it, the spreadsheet will not open
up Excel but opens within another browser as an Excel
file. Programming on webpage is correct, opens up on
other machines just fine.
...If Function help #2
I have what should be a simple IF then formula, which is copied below,
where both criteria must be met: Z9 must be true and S9 must = COS.
Any assistance why this isn't working would be greatly appreciated.
What is contained in Z9?
Maybe you need
<email@example.com> wrote in message
>I have what should be a simple IF then formula, which is copied below,
> where b...[ANN] gitsharp version 0.3.0 released
Hello .NET community,
It has been a while since the last release of GitSharp and as much has
been improved it is about time to release version 0.3 of GitSharp.
This release does *not* bring you merge support as claimed earlier but
still a lot of improvements especially in the Git api.
Download the GitSharp binaries from http://www.eqqon.com/index.php?title=GitSharp/v0.3.0
What is GitSharp?
GitSharp is an implementation of Git for the Dot.Net Framework and
Mono. It is aimed to be fully compatible to the original Git and shall
be a light weight library for cool applications that...forwarding e-mails to a home address in exchange 2003
Yesterday, I posted a question for forwarding e-mails to a blackberry. The
user doesn't want that anymore. The user will be giving his blackberry to
someone else in the office while they're away for a few months. What the
user wants is to have all e-mails forwarded to his home e-mail account.
We're running exchange server 2003. Is there a way of doing so on the
server end? Any help is appreciated.
On Wed, 8 Nov 2006 09:08:31 -0500, "Peter McCaul"
>Yesterday, I posted a question for forwarding e-mails ...Re-Enable CRM User
I am trying to enable a disabled CRM user and I received the following error
message. Any thoughts or suggestions would be greatly appreciated.
String UserId) +0
Microsoft.Crm.Application.Platform.SystemUser.Activate(String id) +38
sender, DataEventArgs e) +127
eventId, FormState state, User user, String objectId,...Outlook rules wizard replies using From field instead of Reply-To address
This is regarding Outlook 2007 and its rules wizard. We have a mail
folder with hundreds of emails that were sent on behalf of people. So
the "From" and "Reply-To" are different.
We created a rule so that we can reply to all of these people but the
rules wizard onto uses the From filed when it processes the messages
instead of the Reply-To field. This behavior only happens with the
rules wizard, we can go through each email, click reply, and get the
Reply-To address just fine.
I understand there was an article posted by Microsoft about this issue
however it was in 2003. I...Pivot Table #2
I have a database with type and age ranges in columns. Six age ranges. One
type column. The data (dollars), by type and age range are below each age
range column. I want a summary report that sums the dollars by type and age
combined. My preference is to have the sum of age ranges in the rows, the
type in the columns with the dollar sum of each type and age range in the
data fields. I hope to have the sum of the types for all ages on the right
and the sum of the ages for all types at the bottom. It seems simple enough
I don't seem to be able to make the table work?
If ...Business Portal 2.7 and eReq (print a PO, display GL account descr
Has anybody tried diplaying the GL acct description when you choose to viiew
a doc in eReg.
Also, has anbody been able to print or display the PO that gets creaed in
eReq from the eReq module without having to log inot Great Plains to get
access to it.
...Thanks Ken Wright but one more question RE saving data from circular references
Thanks heaps for that macro Ken Wright .
I have run it and it works.
However it loops forever. Can I set it up so that it could save dat
from a certain number of iterations?
Thanks again Michae
Message posted from http://www.ExcelForum.com
If you stayed within your thread and did not change the subject
Ken would see your reply as a reply to his reply and would see
it a lot faster than when you start a new thread. Ken would
probably see your post highlighted in RED. Also someone other
than Ken might have been able to help you. (not me I avoid
anything that hints of circul...I need a macro to find cut and paste data to new cell
I have data that I have exported to excel that I need to reformat to be able
to create a pivot table to check for duplicate entries.
On importing the data which is in the form of journal entries the memo line
is stting above the journal numbers in column D. I need to find all of the
comments and cut and paste them to column C. The comments are not all the
same but do contain the same word "To" in the comment. The journals are not
all the same size and so the comment line does not appear at regular
intervals. Any help appreciated as I am very new to VBA
...excel.exe has generated errors #2
Sorry for the cross post.
I am receiving the following message:
""Excel.exe has generated errors and will be closed by Windows.You will need
to restart the program
An error log is being created.""
when trying to open xls files that have been copied from another computer.
Both Excel versions are the same and the file works on the source machine. I
am copying it to and from a floppy which also works when opened on the
Any ideas will be greatly appreciated.
Thanks in advance.
Have you copied the file from the floppy to your hard...I need to go back to using my RR email address in RR
I switched my Road Runner email address to Outlook 2007. I no longer receive
my emails at RR. How can I switch my email delivery back to RR?
Call Road Runner support
Please Reply to Newsgroup for the benefit of others
Requests for assistance by email can not and will not be acknowledged.
"jmc112449" <firstname.lastname@example.org> wrote in message
>I switched my Road Runner email address to Outlook 2007. I no longer receive
> my emails at RR. ...Re: exmerge error
I am getting the following error when trying to use exmerg
can anyone please help
Microsoft Exchange Mailbox Merge Program, v4.00.02
Start Logging:February 27, 2004 20:04:3
[20:04:31] Logging Level: Non
[20:04:31] Reading settings from file 'C:\Program Files\Exchsrvr\BIN\EXMERGE.INI'
[20:04:32] Error 8007203a opening an LDAP connection. ('LDAP://EXCHANGE/rootDSE') (CADRoutines::GetNamingContextData
[20:04:32] Accessing Domain Controller 'PROFI...I keep losing my address book??
This is the 2nd time in 2 weeks where my address book
comes up empty after I reboot. Not only is it empty but
the extra folders I made for saved mail etc. are gone too?
I've searched and cannot find another adress book on my
computer. Why is this happening? thanks.
Is this outlook or outlook express? Is the mail in your inbox gone too?
Diane Poremsky [MVP - Outlook]
Author, Teach Yourself Outlook 2003 in 24 Hours
Coauthor, OneNote 2003 for Windows (Visual QuickStart Guide)
Author, Google and Other Search Engines (Visual QuickStart Guide)
Outlook Tips: http://www.outlook-tips.net...changing paper size #2
I need to change an existing flier created in publisher from letter to legal
size. When I try changing the paper size (under printer set up and page set
up or change template size) the flier is spread out between two pages. I can
only see the two pages in print preview, when I'm working on it I can only
see one page. Any suggestions or ideas? Thanks
When you are finished creating your flyer, File, print, reset your page
preferences on this print screen. There is a print preview on this screen, the
preview should be correct with no tiling.
Mary Sauer ...X.400 address in recipient policy on Exchange 2003
I have added a new Exchange 2003 server to my organization. I moved my
recipient update services to this new server from the existing Exchange 2000
Since then, new accounts have not been stamped with an X.400 address. There
is an X.400 address listed in the recipient policy, but it shows as
unchecked. When I check it, I get a message about not being able to disable
the primary X.400 address, but when I click Ok, and then reopen the recpient
policy, the checkbox for the X.400 address is once again empty.
Is an X.400 address necessary for an Exchange 200x organization in native
mode? ...Entourage 2008 Web Services edition (13.0.3) and " Unable to establish a secure connection" error
One of our users had his Entourage 2008 upgraded to EWS (13.0.3). He is
using Leopard 10.5.8. Since the upgrade he is getting an error/warning
message after he provides his login credentials:
"Unable to establish a secure connection to exchnlb.txstate.edu because the
server name or IP address does not match the name or IP address of the
This looks very similar to an issue that was address by the 12.1.2 update.
There are no reports of other users which this issue. I use the same
version of EWS as the user.
There is an ability to capture i...Cannot send message to address not in contact list
I using Outlook 2003 with Windows XP Pro. I have tried to reply to an email address that is not in my contact list which was generated by ACT. I have turned off name check and autocomplete but whenever I try to send a message that is not listed I get a name check message that Microsoft Office Outlook does not recognize the name and I can't seem to send the message. I even added the address as an Outlook contact but it, too, does not seem to be recognized. Any hints as to why I am at a dead end. Thanks in advance
This problem has been solved. Stupid mistake on my part. No need to rep...Save or Update Changes
When I make changes to the data on my form which is based on a query, those
changes don't appear on my reports until I have advanced to the next record.
How could I apply those changes without advancing to the next record?
mattc (at) saunatec [dot] com
Message posted via AccessMonster.com
You need to requery the recordsource, which could be done many different
ways. You could add a command button to your form, or use the AfterUpdate of
a control, or the LostFocus event of...Exchange 2003 Permissions #2
I have a Windows 2003 Active Directory domain and a NT 4.0 domain
connected by ADC. I have user's in the NT40 domain who need to Manage
one of my 4 Exchange 2003 Servers. I have gone through the Delegation
Wizard in Exchange Manager and granted them Exchange Administrator
privledge. I do not want to make the users Domain Admins. They can
access System Manager and expand everything but the Servers. When the
click on Servers they get this error message:
There is no such object on the server.
ID no: c0072030
Exchange System Manager.