PLEASE HELP ME with page numbering

I posted this earlier, waited all day for a response only to be told that I 
was on a Mac bulletin board that I was led to with a bad interface????
 anyway here is my question. I am DESPERATE

my page numbers are not showing in my document and I am at the end of my
> rope. I am using MS word 2007 and Vista - I am able to go through all the
> menus for header, footer, format page numbers, etc. but then no final product
> shows up.
>
> The help desk at my school is clueless and offered no help whatsoever.
>
> I have spent HOURS trying to insert these page numbers today. I have been
> all over the web, all sorts of techie websites....I did see some mention of
> problems with the Beta version of 2007 but I am using a full purchased
> version of MS 2007 professional home/student. I tried a fix that was
> mentioned in a posting I found but it required getting to a "documents and
> settings" directory that I cannot find.
>
> my whole master's thesis is riding on me being able to do this...NOT GOOD
>
 
0
kimfnp (1)
4/9/2008 8:25:01 PM
mac.office 7017 articles. 0 followers. Follow

2 Replies
331 Views

Similar Articles

[PageSpeed] 55

Well, you've wound up in another Mac group - notice the ".mac." in the 
newsgroup address? If you followed Daiya's instructions there's no possible 
way for you to have wound up here - there isn't a single link on that page 
that points to a Mac group:-)

It isn't that we don't *want* to help you, it's just that Word 2007 is 
radically different from any version of Word for Mac in a number of ways - 
especially on this issue. And it doesn't run natively on Macintosh 
computers. We're trying to guide you to where you'll get the most accurate & 
timely response. Click this link:

http://www.microsoft.com/office/community/en-us/FlyoutOverview.mspx

Then scroll to the bottom right corner of the page where you'll see Word 
listed, followed by links to the various PC Word newsgroups. Alternatively, 
you can click the Word link in the gray Office Discussion Groups navigation 
bar on the left side of the page & pick from the menu there. I'd suggest you 
use the one for General Questions or possibly the one for Page Layout.

Also, don't expect immediate response from a newsgroup - you're letting 
yourself in for a big disappointment if you do. This is not a dedicated 
personal help "hotline". These *public* groups are manned by volunteers who 
contribute their time on an "as available" basis. They're located around the 
world & sometimes a new post doesn't even appear for hours. That's why it's 
imperative that you follow instructions to the correct location in order to 
get the most prompt reply.

-- 
Regards |:>)
Bob Jones
[MVP] Office:Mac

"kimfnp" <kimfnp@discussions.microsoft.com> wrote in message 
news:590EAF90-53A2-4A00-AA2C-957A989070F4@microsoft.com...
>I posted this earlier, waited all day for a response only to be told that I
> was on a Mac bulletin board that I was led to with a bad interface????
> anyway here is my question. I am DESPERATE
>
> my page numbers are not showing in my document and I am at the end of my
>> rope. I am using MS word 2007 and Vista - I am able to go through all the
>> menus for header, footer, format page numbers, etc. but then no final 
>> product
>> shows up.
>>
>> The help desk at my school is clueless and offered no help whatsoever.
>>
>> I have spent HOURS trying to insert these page numbers today. I have been
>> all over the web, all sorts of techie websites....I did see some mention 
>> of
>> problems with the Beta version of 2007 but I am using a full purchased
>> version of MS 2007 professional home/student. I tried a fix that was
>> mentioned in a posting I found but it required getting to a "documents 
>> and
>> settings" directory that I cannot find.
>>
>> my whole master's thesis is riding on me being able to do this...NOT GOOD
>>
> 


0
CyberTaz
4/9/2008 10:37:58 PM
Why the bloody hell are you posting this to a Mac newsgroup?

Pathetic idiot!


On 10/04/08 8:25 AM, in article
590EAF90-53A2-4A00-AA2C-957A989070F4@microsoft.com, "kimfnp"
<kimfnp@discussions.microsoft.com> wrote:

> I posted this earlier, waited all day for a response only to be told that I
> was on a Mac bulletin board that I was led to with a bad interface????
>  anyway here is my question. I am DESPERATE
> 
> my page numbers are not showing in my document and I am at the end of my
>> rope. I am using MS word 2007 and Vista - I am able to go through all the
>> menus for header, footer, format page numbers, etc. but then no final product
>> shows up.
>> 
>> The help desk at my school is clueless and offered no help whatsoever.
>> 
>> I have spent HOURS trying to insert these page numbers today. I have been
>> all over the web, all sorts of techie websites....I did see some mention of
>> problems with the Beta version of 2007 but I am using a full purchased
>> version of MS 2007 professional home/student. I tried a fix that was
>> mentioned in a posting I found but it required getting to a "documents and
>> settings" directory that I cannot find.
>> 
>> my whole master's thesis is riding on me being able to do this...NOT GOOD
>> 
>  

0
4/10/2008 3:39:33 AM
Reply:

Similar Artilces:

CToolBar Help
Hello, I've been trying to add a toolbar to my dialog following the example from MSDN a http://msdn.microsoft.com/library/default.asp?url=/library/en-us/vcmfc98/html/_mfc_ctoolbar.asp But for some reason I just can't add the toolbar I created. Here is my code: CToolBar m_toolbar; if (!m_toolbar.Create(this, WS_CHILD | WS_VISIBLE | CBRS_TOP | CBRS_GRIPPER | CBRS_TOOLTIPS | CBRS_FLYBY | CBRS_SIZE_DYNAMIC, IDR_TOOLBAR1)) { MessageBox("Error -1"); } m_toolbar.LoadToolBar(IDR_TOOLBAR1); Could somebody please tell what, if anything, I am doing wrong? Thank you, V...

Office 2007 Professional: Help Files Issues
Gents, I cannot find a solution to this odd issue and before I submit a support ticket I thought I would ask the community. We have office 2007 professional (volume licensing) on a Window 2003 terminal server. We have a few users out of a bunch that get the "This page is unavailable" I have tried the Refresh and back. I've tried online and offline modes. In offline I get the table of contents to the left but same unavailable message when I click the links. I noticed on testing some other users, that apparently never used the help. That there are some prompts...

Outlook 2003 Messages and Calendar Appts Received as PLAIN TEXT
SGVsbG86DQoNCkkganVzdCBnb3QgYSBuZXcgbGFwdG9wIHdpdGggVmlzdGEgSG9tZSBCYXNpYyBv biBpdCBhbmQgSSBjb3BpZWQgbXkNCnBzdCBmaWxlIGZyb20gbXkgb2xkIGxhcHRvcCB0byB0aGUg bmV3IG9uZS4gRXZlcnl0aGluZyB3b3JrcyBmaW5lDQpleGNlcHQgYWxsIGUtbWFpbCBtZXNzYWdl cyBhbmQgY2FsZW5kYXIgYXBwdHMuIEkgcmVjZWl2ZWQgYXJlIGluIHBsYWluDQp0ZXh0LiBJJ3Zl IHNlYXJjaGVkIGV2ZXJ5d2hlcmUgZm9yIHRoaXMgZml4LCBidXQgZm91bmQgbm90aGluZy4gDQoN CkRvZXMgYW55b25lIGhhdmUgYW55IHN1Z2dlc3Rpb25zIGZvciBtZT8gDQoNClRoYW5rIHlvdSEN ClNwdWRkeQ0K me@cox.net <me@cox.net> wrote: > I just got a new laptop with Vista Home Basic on it and I copied my > pst file...

Spell Check Help
I have this code in the AfterUpdate in a TextBox set for a memo: If Len(Me!casefacts & "") > 0 Then DoCmd.RunCommand acCmdSpelling Else Exit Sub End If everytime the spell check executs, it check the whole form. How can I get it to just check that one textbox and not everything else. bladelock wrote: >I have this code in the AfterUpdate in a TextBox set for a memo: > >If Len(Me!casefacts & "") > 0 Then > DoCmd.RunCommand acCmdSpelling > Else > Exit Sub >End If &...

Help with Regexp, please
Hi, The regular expression (\d{15,16}) matches a substring in a cell. I want to extract the remaining part of the cell ie. from the character after the matched substring till the end of the string in the cell using a regular expression. Is it possible to do this? Thanks in advance for the help. Regards, Raj Raj, with abcd15,16xyz in a cell the code below abstracts abcxyz. Maybe you can use this as a basis to develop your code Function GetSubstring(S As String) As String Dim re As Object Set re = CreateObject("vbscript.regexp") re.Pattern = &quo...

Default Value on Form Help
I have a query that calculates the total of a field in my table - Field Name in my Table is Total Value which calculates the total for a series of records that has the same invoice number. Field in in my query is Aggregate Value. I now have a form where I bring in the Aggregate Value. I need to create another Text box Value Verified where I bring in the Aggregate Value as a default, but I may have to change it if the Value has changed - but the Aggregate Value has to remain the same. I tried using default value on the form for the Value Verified Text control that brings in ...

Publisher 2007 Trial Help
I installed the trial version of Publisher 2007 and want to uninstall it now. I have tried to remove in the "add/remove" programs section. And I have also tried a suggestion I found in an earlier post about going to the "installer" and trying to uninstall it there. Oh and I tried repairing it and then trying to uninstall it. I can't even open the program from my programs menu and I can't get into the language section to check the language. It tells me that the language isn't compatible with my version or something to that effect. Nothing has worked...

PLEASE PLEASE HELP
I Have an emergency... I deleted a macro !!! I have 60 rows with checkboxes on cells A1 trough A60 that automatically as checked were inserting current dates on the cell next to it. for some reason a disaster happened and the macro was deleted or messed up. I tried searching for help in these groups, but none so far. I found one, but it is not a macro besides when I use that function all the other previous dates keep changing when other checkboxes are checked on in different days of the week. If you can please guide me to the right answer I will appreciated. Hope I made sense with my explana...

Cannot access a file -- HELP
I have this problem at work (using Excel 2000 Windows 2000) and at home (Excel 2003, Windows XP Pro). SOMETIMES...not always, I try to access a file on a network drive I get the message: "path..filename could not be found. Check the spelling of the file name and verify that the file location is correct". Once I get the message on that file, I always get it on the file....but there might be 27 others in the same folder that I can open. And I get the message if I try to open the file via explorer or via Excel. If I copy the file to my C: drive it opens fine. I even tried t...

Deleting pages
I would like to know how to delete multiple pages in Publisher 2003. I don't know how to do this in any version of Publisher. I do know how to delete single pages. I want to delete many. thanks Hi David Reese (dreeseonon@comcast.net), in the Microsoft� newsgroups you posted: || I would like to know how to delete multiple pages in || Publisher 2003. I don't know how to do this in any || version of Publisher. I do know how to delete single || pages. I want to delete many. || thanks No, you cannot delete multiple pages at a time. You can delete a page at a time by right clicking...

Sum Function Help Please
I have created two Option Groups, setting up values against the radio buttons. The output from both boxes works fine (thanks to the Wizard), however when I'm creating a formula on the report, I'm unable to add the two returned values together. If I type in =([Q1]+[Q2]) then I get both numbers concatenated together (ie returned value from Q1 is 1 and returned value from Q2 is 2, the answer I get is 12 !!!!.) Interestingly if I enter =([Q1]-[Q2]) then I get the correct answer. Any help would be greatly appreciated here. I could be wrong, but it seems like access i...

Need number of rows
Is there any function which can return the number of rows present in th specified sheet. I remember I have seen one function for this befor somewhere. But no able to recollect :confused: thank -- alsamee ----------------------------------------------------------------------- alsameer's Profile: http://www.excelforum.com/member.php?action=getinfo&userid=2404 View this thread: http://www.excelforum.com/showthread.php?threadid=40017 There is ROWS and ROW functions. "alsameer" wrote: > > Is there any function which can return the number of rows present in the &g...

2nd request for help -PLEASE PLEASE PLEASE
went through a windows update and was asked to reboot which I did. I had Outlook open and closed it before rebooting - it was opened to contacts. when I tried to access Outlook I got an error message saying "your personal address book could not be opened. the file is either not accessible or not a personal address book. choose retry to access your personal address book, or choose cancel to not open your personal address book with this application." I have no other application to open this address book with! my contact info is detrumental to me as well as my Calendar ...

In Word How do I switch off auto date insertion please
How can I disable? ...

Remove template help task pane from startup
I created an invoice using one of Microsoft's templates. The help template appeared when I was designing the invoice. Now that the invoice is finished, I would like for the help template to NOT appear. I went to Tools-Options and unchecked "startup task pane" and also went to Tools-Customize and unchecked "Task Pane". This made the task pane go away, but only until I opened it again. Is there any way to make it not show up every time I open the document? ...

No email address, so it used a fax number?
When i click the To... button in a new email, it lists everyone in my contact list, not just the ones with emails. As a result of this, if i add a contact that has no email address listed, outlook will try to email his fax number, or whatever info i have added for this contact. How do i make outlook only list contacts that have email addresses listed? Thanks -Marc See http://www.slipstick.com/contacts/nofax.htm Marc wrote: > When i click the To... button in a new email, it lists > everyone in my contact list, not just the ones with > emails. As a result of this, if i add a c...

Can't SEND SSL email out!! Please Help... it HURTZ!
OKay... being a bit silly about he hurting part. I have a strange email issue with some of my computers at home that I use for work. We have 4 computers. 2 of them work FINE, the other 2 have issues. I know the email accounts are working correctly because if I run them on the 2 *good* computers they work like they should. Configurations: (GOOD Notebooks) 1 - HP AMD-XP notebook with WinXP-Home SP1, Office 2000 2 - Sony P4 Notebook with WinXP-Home SP1, Office 2000 (Bad systems) 3 - Dell P3 notebook with WinXP-Pro SP1, Office 2002 4 - Compaq AMD-XP with WinXP-Home SP2, Office 2000 ALl ma...

Please Please Please help
Hi I have a Worksheet with option buttons and I need the users to be able to click on the options but not be able to drag or move them. I don't want the users to be able to click into or type anything in any of the cells - only these options buttons???? How is it done. I have tried unlocking all cells and then locking the individual ones, but the user can still drag the option button around and they could do this by mistake thus upsetting the design of my sheet! I have tried protecting the sheet for Objects - but then I can't click on the option at all ....Please someone help...

Help with formula #3
I need to edit this formula 2 ways =COUNT(J1:J5) first way I need it to count any cell with a value lower then 10 as 1 and any cell with a value of 10 or higher as .75 For example if cells j1 to J4 are all valued at 6 but cell J5 is value at 11 the total I get would be 4.75 Second formula I need is to count J1 to J5 only the cells with a value of 10 or higher as .25 For example if cells J1 to J4 are all valued at 6 but cell J5 is value at 11 the total I get would be .25 Hi Leave Alone! First problem: =COUNTIF(J2:J6,"<10")+COUNTIF(J2:J6,">=10")*0.75 Second pro...

Need to convert the numbers with tolerances
I have a column of numbers in teh format 0.45+_0.23 . +_ is a character plus or minus . How can I convert the number before and after +_ into mm automatically ? Any formula ? - Vijay v_udupa@hotmail.com On Jan 8, 10:40=A0pm, Jambar <vijayad...@gmail.com> wrote: > I have a column of numbers in teh format 0.45+_0.23 =A0 . +_ is a > character plus or minus . > How can I convert the number before and after +_ into mm > automatically =A0? Any formula ? I presume the "numbers with tolerances" are actually in Text format. Depends on the exact format of the number st...

Help with series data
I am trying to create a sheet.. But In A1 i need to to look like this: TOTE20000 TOTE20000 TOTE20000 TOTE20000 TOTE20001 TOTE20001 TOTE20001 TOTE20001 BUT i need to keep this series up to TOTE24999 Can anyone help me with a simple solution? It wont see the pattern with TOTE infront but will with just the numbers, But when I do a Replace it starts chunkign the numbers to decimals. I appreciate any help! I have to read between the lines a bit because I'm not really clear on what you want. Let's say you want to enter 20000 in the cell, but you want it to be displayed as TOTE20000...

I need help with SQL please
I have a form with a group box on it. The code for it is: 20 Select Case grpPlan.Value Case 1 30 strMon = "WorkRec" 40 Case 2 50 strMon = "IntRec" 60 Case 3 70 strMon = "FinalRec" 80 End Select After I select the one I want then the SQL is build based on the selection and a report is generated. strWhere = "EmpSuper.WorkRec=""" & strMon & _ """ or EmpSuper.IntRec=""" & strMon & _ &quo...

page set up in document
We have different brands of printers - some with affixed trays, others without. In our associated template we have page set up as: (different) first page - tray 1 and other pages - tray 2. This has been made the default setting on that particular template. PROBLEM: When we print first to a plain printer (even the same brand and tray set up), once the document has printed, it reverts to "automatically select" and the tray 1/tray 2 set up has to be done all over again. This template was worked on by our software support (they would have different printers from us). Co...

Help with vlookup results for summary
I gotta vlookup table and on tha other worksheets people enter the info from dropdown boxes. I need to show the books sold and the average of looks at it after being chosen to be listed as a summary. A B C red book $15 x Blue book $10 x red book $20 w So if a "red book" "$15", a "blue book" "$10" and a "red book" "$20" was sold, and I want to list red book or W books, how can I display this summary info? It should look something like this so i can use the figures for sums and division. Red Book | 2 | ...

conditional formatting help please 07-19-07
Hello, I am having trouble using the conditional formatting. I want the background of the "End Date" to turn red when the "Start Date" is entered and then for the red background to go away after an "End Date" is entered. I used the expression ("Start Time" Is Not Null) and that made my background red but I can't seem to figure out how to get the red background go away. I tried a couple of diffrent expression like setting another condition ("End Time" Is Not Null) but it didn't work. Can some please help me find the right express...