How to tell what Updates have been Installed?

I just tried the Microsoft AutoUpdate and it says there are no updates
for your software at this time. I then clicked on the "View Installed 
Update" button and shows no history. Just blank page.

My Entourage version is 12.0.1 and I think this is the current version.  
Should the 12.0.0 to 12.0.1 update be displayed on the installed updates 
page?

How can this update be added to the blank installed updates page?
0
arkayREMOVE (118)
5/13/2008 12:12:22 PM
mac.office 7017 articles. 0 followers. Follow

2 Replies
1073 Views

Similar Articles

[PageSpeed] 10

There were some issues with 12.0.1, obviously--it doesn't show on my 
machine either.

I don't know for sure, but I would expect that 12.1 will be a combo 
updater that includes and overrides 12.0.1, and then it won't matter 
whether 12.0.1 shows as an installed update. Let's cross our fingers 
that the mechanism will work going forward, and worry about it if it is 
broken for 12.1.

By the way, I think that it is standard for AutoUpdate to roll out the 
update slowly--the servers probably can't handle sending it to every one 
who owns Office 2008 at the same time. So don't freak out when AU 
doesn't show 12.1 for a bit. It's not on Mactopia yet either, but it's 
also not business hours in Redmond yet.


aRKay wrote:
> I just tried the Microsoft AutoUpdate and it says there are no updates
> for your software at this time. I then clicked on the "View Installed 
> Update" button and shows no history. Just blank page.
>
> My Entourage version is 12.0.1 and I think this is the current version.  
> Should the 12.0.0 to 12.0.1 update be displayed on the installed updates 
> page?
>
> How can this update be added to the blank installed updates page?
>   
0
daiyaNOSPAM (1173)
5/13/2008 1:49:13 PM
In article 
<arkayREMOVE-C5D330.07122213052008@news.houston.sbcglobal.net>,
 aRKay <arkayREMOVE@qsl.net> wrote:

> I just tried the Microsoft AutoUpdate and it says there are no updates
> for your software at this time. I then clicked on the "View Installed 
> Update" button and shows no history. Just blank page.
> 
> My Entourage version is 12.0.1 and I think this is the current version.  
> Should the 12.0.0 to 12.0.1 update be displayed on the installed updates 
> page?
> 
> How can this update be added to the blank installed updates page?

I just installed SP1 and it looks like MS ditched the "View Installed 
Updates" button.  The Get Info now says 12.1.0 for Word, Excel and
Entourage.
0
arkayREMOVE (118)
5/13/2008 8:09:10 PM
Reply:

Similar Artilces:

update problem-crossposted
As I seem to have been abandoned by MS I thought I'd ask here. I have retail versions of Office 2003 student and teacher and Publisher 2000. These are not OEM or illegal copies. I was having numerous problems updating Office 2003 and was lead through an un-install and re-install by MS tech support. Received many updates that installed correctly until... I received a message that I needed to install updates for Office 2000 and that one had to be installed first and separately for the other to work. It would never download. After hours on the phone with MS it was determined that si...

Service Packs and installing OS's?
Hi. I was wondering if someone downloaded and saved a Service Pack, installed an OS, then installed that Service Pack: Would it save them from downloading the prior service packs and updates? Eg: A person installs Windows XP with Service Pack 1. But beforehand they got a copy of Service Pack 3. They then install Service PAck 3 ontop of Service Pack 1. Hence erasing the need to get Service Pack 2. Or do you need to start from the first update and get the rest no matter what? Windows update messages told me Service packs have all the previous updates and service packs with the...

Problem while installing Outlook Client 1.0
Hi everyone, I have a BIG problem while installing the Outlook Client for Microsoft CRM 1.0 I am installing this client on a laptop with Windows XP Professional, Office XP Professional and SQL Server 2000 Developer's Edition. I log on my computer as an admin of my Active Directory, I can access my remote CRM Server using IE an I can install the prerequisites for the Outlook Client (MSDE 2000 and everything else). The installation goes its way (I can find the CRM Server), but at the end, the installation procedure hangs and rolls back its actions ! No LOG file, no error message...

How to tell what folder an Opened Email is in ?
I use Google Desktop to find emails sometimes. (I have zillions saved in Outlook in various Outlook email folders) When Google Desktop finds the email it lets me open it in Outlook... But... I can't tell what Outlook Email Folder it is in. I could let Outlook search all my email folders but Google Desktop is so much faster. Can anyone tell me how, once an email is open in Outlook, to tell what Outlook folder it is in? thanks for any help. outlook doesn't have any way of showing you that information. It's better to use fewer folders and other mail management features lik...

Outlook Freezing tell Exchange service restarted.
Server: Windows NT Small Business Exchange 5.5 SP4 NOTE: The server is also a SQL server, InterBase, and a Norton's Anti-Virus server. Client: Windows 2000 Pro Outlook/Office 2000 Norton's Anti-Virus Problem: About once to twice a week outlook (on all clients 30+) will not connect to the exchange server or outlook is connecting but it's freezing on the client computers. Temp fix: Restart the Exchange service on the server. Dose any one know how to fix the problem so that I don't have to keep restarting the exchange service? I fixed the problem: I stopped the Microsoft Lic...

Exchange 2003 realt time free/busy updates?
I have a few resource mailboxes in Exchange 2003 that the Auto Accept Agent is processing calendar appointments for. I have also set these mailboxes to update free/busy data every minute. Is it possible to udpate the free/busy data sooner or immediately? In Outlook go in to Tools | Options | Calendar Options | Free / Busy and change it to 1 minute. -- This posting is provided "AS IS" with no warranties, and confers no rights. Dgoldman http://blogs.msdn.com/dgoldman Download OABInteg from here: http://gotdotnet.com/Community/UserSamples/Download.aspx?SampleGuid=A2338E73-F521-...

Who could tell me?
Hello all: I create a single document,and it is running ,and now I want to get some information on it through another application, except hWnd for CView and CFrameWnd what I could get some information for CDocument and CWinApp?Thanks. As far as running slow, it would be extraordinarily difficult to say what that is given that you haven't even told us what is "running" or "slow". You cannot access CDocument, CWinApp, or any other object from another application. Applications run in completely different memory spaces and, even if you passed a pointer, it would...

Update using SELECT
Hi, Can anyone help me how to Update an existing SQL Server 2008 table using the following select statement: SELECT TOP 1 SNAME, COUNT(*)[SNAME_CNT] FROM ConusSolLyr WHERE TAXCL <> ' ' AND TAXOR = 'Alfisols' GROUP BY SNAME ORDER BY SNAME_CNT DESC I'd like to update TaxOrder table's SNAME field with the resulting value of SNAME from the above select statement. Thanks so much in advance. Hi Use common table expression WITH cte AS ( SELECT COUNT() OVER (PARTITION BY SNAME ),[SNAME_CNT] ,SNAME FROM ConusSolLyr WHERE TAXCL <> '...

if this pay, please tell me .hope not swindle!
http://richptr.net/pages/index.php?refid=websp ...

Updating accounts in 2007 Money Delux
I get the following message when I try to update my accounts: "Your account information is being updated, which may take a few minutes. If this message appears for more than 5 minutes, try again." When I try again after any period of time, I get the same message. This has been going on for the past few days. Before that, the program had no update problems. I am not aware of any changes that I have made. How can I fix this problem? On Oct 19, 5:32 pm, pteicholz <pteich...@discussions.microsoft.com> wrote: > I get the following message when I try to update my accounts: &g...

Tracking updates
Here is the situation. I have a worksheet that an employee enters how much time they spent doing each work task in a day. What I need to do is track when they entered their time into each column. I could do the track changes but the problem is there are 81 sheets that I have to keep track of. Is there anyway I could put code in their worksheet that would copy the column that they changed into a different workbook so that I could track everyone from one workbook. Thanks in advance for any help. ...

Don't Update Links
I have a workbook (Book1.xls) which has links in it and also has a macro that saves an array of sheets from the original under a different name (date.xls) Example: <<strFileName = Worksheets("transfer").Range("AA1").Text ThisWorkbook.Worksheets(Array("sheet1", "sheet2", "sheet3", "sheet7")).Copy ActiveWorkbook.SaveAs Filename:="C:\TEMP\ " & strFileName & ".xls">> (the strfileName is a date) This code copies the sheets but none of the macros / VB Code The problem i have is that when ...

Autofilter updating automatically
Hi I have an autofilter that checks on a Planning Board and is set to filter out non-blanks. When the Planning Board Updates the autofilter is not updating automatically to show that a new entry has been made on the Planning Board. All the updates that occur occur within the range of the autofilter Is there anyway of doing this? Thanks Brian You didn't like the reply at your other post? "brian.baker13@googlemail.com" wrote: > > Hi > > I have an autofilter that checks on a Planning Board and is set to > filter out non-blanks. When the Planning Board Up...

How to tell...?
....which classes can be derived from, rather than directly being used in MFC? (I know so far CAsyncSocket and CWinThread can't...) Can't what? It is common to derive classes from CAsyncSocket and CWinThread. Derivation is a property of C++, not of MFC. While deriving your own subclass of CString has a number of problems, pretty much any other class can be derived from. joe On Mon, 27 Jun 2005 23:11:31 -0700, "nly" <nlyee2001@yahoo.com> wrote: >...which classes can be derived from, rather than directly being used in >MFC? (I know so far CAsyncSocket and...

Help updating a table
hello all I am getting my data from an ODBC connection, using Access 2003. The application refresh all the data when the user clicks on a button. It refresh the data by deleting the old table and substitude with a new table, I have a make table query to do this. All this is working fine, but now the user wants to keep some of the records from the old table and when they click on the refresh button it actually refresh BUT it keep some particular records. The records they want to keep are those that have a check on a checkbox that represent a paid field. I was thinking of a update query but im...

Insufficient privalages installing Reporting Services
I am trying to install the Reporting Services on my CRM server V3.0 SQL 2000. The installation gets as far as restarting the services and then fails with; Service 'ReportServer' (ReportServer) failed to start. Verify that you have sufficient privalages to start system services. In the setup I chose to use Local System Account, I am logged in as domain admin. There are no services that have not started but there is no sign of a ReportServer. I have tried using a domain account as per the notes but with the same results. Anyone seen this before? Colin ...

Updating Date with Update Query
I have inherited an Access 2003 database that has a table that stores Invoice Number, Invoice Month, Quantities, etc. A user in my team has pointed out that while each record has the Invoice Number filled (because it is part of the primary key), many records are missing the Invoice Month (an optional field.) This user wants the Invoice Month filled. I created an update query to fill in the blanks in the Invoice Month field. In the design of this query, in the "Update to" field I am using an expression like this: IIf([Inv Number]=2,1/1/2010,[Inv Month]) I was planning to...

[ANN] Unable to download updates
Some users are receiving the error "can't find the server download.microsoft.com" when trying to download the updater files for Office. This frustrating problem does not affect everyone. It is not an Office for Mac problem, nor is it browser specific. Feedback indicates it could be older PPC computers or older versions of the OS that do not deal with changing DNS updates that are being rolled out. Try these solutions and let us know if they worked for you. Unable to download updates (The Entourage Help Blog) <http://blog.entourage.mvps.org/2008/07/unable_to_download_update...

Office 2008 v12.1.0 to v12.2.0 upgrade fails and creates corrupt Office installation.
Version: 2008 Operating System: Mac OS X 10.6 (Snow Leopard) Processor: Intel So here's my story. I upgraded to Snow Leopard from Leopard on my macbook pro. (MacBook Pro 15" Intel Core 2 Duo late 2006 model) I was running Office 2004 under Leopard. Office 2004 worked under Snow Leopard but slowly. Decided to upgrade to Office 2008 since it works faster under Intel based macs and found a $120 upgrade online. But before I purchased the software I downloaded the trial version of Office 2008. The trial installs v12.0.0 of Office 2008 and then applies SP1, SP2 and finally update v12.2.1. ...

Outlook 2003 installed with Office 2000
Hi Has anyone had experience with installing Outlook 2003 over Outlook 2000 in an Office 2000 environment, and if so, issues that may have resulted from this, ie, loss of functionality for some of the other Office 2000 apps etc. thanks in advance Steve On Tue, 28 Sep 2004 17:28:35 -0700, "Steve" <anonymous@discussions.microsoft.com> wrote: >Hi > >Has anyone had experience with installing Outlook 2003 >over Outlook 2000 in an Office 2000 environment, and if >so, issues that may have resulted from this, ie, loss of >functionality for some of the other ...

who could tell me how to solve it?
I wrote some code about communication comm port and thread using vc6.0,please look: void CD11::OnButton1() { iPaint=4; CMainApp *p =(CMainApp *)AfxGetApp(); HWND m_hDlg=p->Dlg->m_hWnd; ::SendMessage(m_hDlg,WM_PAINT,0,0); } CEvent g_event; void CDlg::OnPaint() { CPaintDC dc(this); // device context for painting switch(iPaint) { case 0: break; case 4: strBaud=(iBaud==0?"1200":"9600"); if(m_MSComm.GetPortOpen()) { m_MSComm.SetPortOpen(false); } ::Sleep(300); m_MSComm.SetCommPort(iComm); iPaint=0; break; } // Do not call CDialog::...

DST, and Time Zone Update Tool
If I run this update tool on mailbox, are all appointments within the DST change period affected? We have a situation were some workstations had KB928388 installed in Dec - as I understand it, this was a KB931836 predecessor. So, workstations with this update that booked appointments after that should be OK, but not appointments booked prior to that date - Correct? The rest of the servers and a few laptops got the update in late Feb. Every machine now has KB931836 and there is a mix of appointments during the DST change period that are OK and some that are off by one hour ahead. IF I ru...

Install order for SharePoint 2010, SQL Server 2008R2, etc.
Hi, all, I'll post this in the SQL Server area as well. I'm creating a new VM with 2008R2, SharePoint 2010, and Office 2010 beta/Gemini. Is there a specific order I should install these in? Many thanks.... 1)OS 2)Office 3)SQL Server 4)Sharepoint Thanks very much!!! "Kamlesh" <user@msgroups.net/> wrote in message news:O1fuLkblKHA.3128@TK2MSFTNGP02.phx.gbl... > 1)OS 2)Office 3)SQL Server 4)Sharepoint > > --- > frmsrcurl: > http://msgroups.net/microsoft.public.sharepoint.general/Install-order-for-SharePoint-2010-SQL-Ser...

Massive network slowdown after 02/09/2010 updates
Hi All, After the 02/09/2010 updates went on, I am getting calls from customers complaining about massive slowdowns. From my initial research, I have found that if I copy a file they are having trouble opening on the network to their desktop, the slowdown vanishes. The slowdown only occurs when trying to open a file, such as an Excel spreadsheet, from the network. What should take 1 second, takes 10 to 15 seconds. Now, two of the three, business users complaining are using Samba (Linux) for their file server. So, no Microsoft patches on those servers. The third business i...

Date formatting without my telling it to
Help. I highlighted an entire line by clicking the line number on the left. I then clicked the "center" shortcut button. My first column is text. The next eight are dates which I entered as "July 17," etc. When I clicked "center," all columns were centered, which is what I wanted. HOWEVER, excel also changed the format of the dates to "17-July." [gerrrrrr] The "undo" button is grayed out. Why?? How can I undo the date re-format?? MPF Select all the cells you want to reformat. Do Format - Cells - Number tab - Date. Select the for...