SOP NonInventory Unit Cost 6 Decimal Places
Is there any simple way to increase the currency decimal places to greater
than the current highest value of 5?
I don't believe there is any easy or even moderately difficult way to do
this, as the field types used to store amounts in GP only go up to 5 decimal
Dynamics GP MVP
Flexible Solutions - home of GP Reports
"Scott Rutledge" <firstname.lastname@example.org> wrote in message
> Is there any...Reduce currency decimals
Is there any tool which will reduce the currency decimals on our Great
Plains system. We want to reduce our system currency decimals.
I'm not sure if this is what you mean, but there's
Tools >> Utilities >> Inventory >> Change Decimal Places
This utility can change the decimal places for items.
I don't know of any system-wide change for decimal places.
> Is there any tool which will reduce the currency decimals on our Great
> Plains system. We want to reduce our system currency decimals....decimal problem
I a very strange effect when using different decimal settings
and calculating some values:
DECLARE @Decimal1 decimal(5, 2)
DECLARE @Decimal2 decimal(30, 2)
SET @Decimal1 = 0.2
SET @Decimal2 = 0.2
SELECT (CONVERT(decimal(15, 15), 0.000000000322900) * (1 - @Decimal1))
SELECT (CONVERT(decimal(15, 15), 0.000000000322900) * (1 - @Decimal2))
The first result is correct (0.00000000025832000),
the second is wrong, why ???
Thanks for any comments
This is what happens when you multiple these precision&scales
15 + 3...Decimal
In a laboratory test we do the temperature has to be reported to the
Can anyone let me know how to format it so that when the result is a whole
number, it leaves the decimal point out?
eg 22�C or 22.5�C (not 22.�C or 22.0�C)
"Alan Cocks" <email@example.com> wrote in message
> In a laboratory test we do the temperature has to be reported to the
> nearest 0.5�C.
> Can anyone let me know how to format it so that when the result is a whole
> number, it leaves the decimal point out?
&g...VBA code and decimals
I have some VBA code as this:
if lastrow is 138 then rrows should be 34.5 but I always get 34(no decimal)
How do I fix that
I just did this and got 34.5
lastrow = 138
rrows = lastrow / 4
"pcor" <firstname.lastname@example.org> wrote in message
>I have some VBA code as this:
> if lastrow is 138 then rrows should be 34.5 but I always get 34(no
>...Currency and the number of decimal places
I have an application which has neen running for a number of years, firstly
on Access2000 then XP and now on Access 2003.
It uses many currency fields for invoicing , credit notes etc. Each field
which is of currency type has the decimal property set to 2.
Up until recently the ATB balanced fine but lately it has been a few cents
out. The reason is that some amounts have been put in with 3 decimal places
and some calculations (eg GST of 10% of $398.68 returning to the GST field
a value of $39.868) returning 3 decimal places.
I guess with the calculations, I can code to make sure only ...No decimals?
Is it possible to stop Money (2005) from using decimal places in the
base currency? I am using a currency that uses only integers and no
cents (because cents are almost worthless), and invoices amounts
usually get some cents due to sales tax calculations, Is it possible to
get rid of them? I find this very annoying since cents accumulate over
several transactions, and end up with an slightly unreal balance...
It was possible in older version (pobably until 2001).
You had to change the Windows's regional settings in the control panel
before a new file creatio...Decimal number to percentage formula (newbie question)
I've got a column full of numbers like 0.5, 1.0, etc. I need them to look
like 0.500%. I figured out how to format the cells so that 0.5 looks like
0.500, but when I change the cell format to percentage, it makes 0.500 into
So I figured out how to make a formula that divides 0.500 by 100
(=R1C6/100), resulting in 0.005, which I can format to a percentage and get
Where I'm stumped is in applying that formula to the entire column. Instead
of =R1C6/100, I want my formula to say =all rowsC6/100. How do I tell it
Thanks for putting up with a newbie
...European vs American decimals
I have transferred a chart with statistics from an American Website to my
Dutch version of Excel 2003.
All the statistics are stated in the American format (with a period as the
decimal sign): example = 8.6
I am not able to make formulas because Excel doesn't seem to recognize the
period (.) as a decimal sign. (all my equations get the answer 0)
I would like to know how to change the period into a comma(the Dutch decimal
sign), so that I can use the formula function.
I would like to know how to make Excel recognize the Amerian format to use
the formula function.
H...Count digits before decimals and after decimals
Would like to count the digits before decimals and after decimals.
111975.35 should be 6 digits before decimals and 2 digits after decimals
12456.25 should be 5 and 2
2478.24 should be 4 and 2
248.37 should be 3 and 2
Using LEN does not help.
Can you help please?
Why doesn't LEN help. try these
and for the decimal portion
When competing hypotheses are otherwise equal, adopt the hypothesis that
introduces the fewest assumptions while...Don't lose my decimals!
I have a int field and a decimal field (which however contains only numeric
I need to divide this fields:
The operation is Ok, but I don't get decimal. I tried even
but it's the same.
How do I get decimals? And I want to get only two.
"Luciano (DOC)" <email@example.com> ha scritto nel messaggio
>I have a int field and a decimal field
I mean a varchar field.
Data typ...decimal separator?
I'm using web quiries to obtain data from web pages. Some of the sites
use ',' as a desimal separator others use '.'. I'm from Finland so I'd
like to use ',' as decimal separator. Is there a way to format those
U.S.-format('.') numbers to Finnish-format(',') without changing the
setting for the whole progmam/operating system??
format the cells where you will paste as text
paste in the data
format the cells a general
Replace what .
replace with ,
Jimmy <jj_22_jj@yahoo...Number Format
I have a system that records attribute data. An Engineer enters a
specification range for the values and an integer value for the desired
number of decimal places to display. I have the following formula in my
report's record source
This works to limit the number of decimals, but doesn't "set" the display.
[Act_value] = 0.5
[Dec_place] = 3
The above formula will diplay 0.5. I want it to display 05.00.
Is there a way to do this? Any help will be appreciated.
Use the format function
Format(Round([Act_Value],...align column of numbers
Operating System: Mac OS X 10.5 (Leopard)
I must make a manual table of contents with: 1) the Chapter names left-justified, 2) the sub-chapter names indented one tab-stop, 3) dotted lines btw. the Chapter (and sub-chapter) names, and 4) the page #s on the right, and I'd like to right-justify the page #s. From my reading it appears that maybe one would use Tables to do this, but I have not been able to make it happen. <br><br>Thank you, <br>
Lindsay Holland <br>
No, you do it with tab settings a...Qty Decimals
Hi Out There,
Does anyone know if there is a way to set a part to 4 decimals, but to
show 0 decimal places on the PO & SOP Screens and printouts?
We would like to have the option of 4 decimals for Bills of Materials, but
we don't want the orders and PO's to show 4.0000 because it forces the data
entry to add a perios in order to make it a whole number. (We've been having
issues with that)
You can do this with Modifier/VBA. If you don't find a better way and
want to pursue this route let me know and I will help.
...format and decimals in control text
format and decimals in a text box do not seem to work as expected.
I can set format to general number or leave it blank and decimals to 0 or 1,
makes no difference, I get 1 decimal in some text boxes and no decimals in
others. the decimals are not rounded off either, they can be .3 or .9. does
anyone know why and how to deal with this problem?
>format and decimals in a text box do not seem to work as expected.
>I can set format to general number or leave it blank and decimals to 0 or 1,
>makes no difference, I get 1 decimal in some text boxes and no decimals...Degrees Minutes Decimal Minutes to Decimal Degrees.
I have got a worksheet with cells like:
I need to get that into decimal degrees like
Is there a way to do this with a forumla? I start with find, left,
right functions, but I ended up parenthesis hell.
"Al" <firstname.lastname@example.org> wrote:
> I have got a worksheet with cells like:
> E174 36.992
> I need to get that into decimal degrees like
=LEFT(A1,FIND(" ",A1)-1) &
----- original messa...number of quantity decimals
Other than perhaps rounding issues, are there any problems with having
quantity decimals for some items in inventory being 5, some being 4, and some
If it works for your parts and pricing, it works for GP. I frequently have
some parts with 5 decimals and others with 2
Richard L. Whaley
Author / Consultant / MVP 2006-2008
Documentation for Software Users
Get our Free Tips and Tricks Newsletter and check out our books at
> Other than perhaps rounding issue...text alignment
How can I align text to the bottom of cells in Excel 2007. The bottom text
alignment button places text only in the center.
Make the Cell higher and then look at Center vs. Bottom.
> How can I align text to the bottom of cells in Excel 2007. The bottom text
> alignment button places text only in the center.
I have a pedantic client who when he exports the report to excel does not
want to see two decimal places . I have set it to N0 and P0 , but alas no
luck , any suggestions ?
...Preserve decimal 0 in function bar
Hi, my problem is to show decimal in bar function when decimal is 0
If i write "=3,00+2,70" excel write "=3+2,7".
How can i say excel to don't truncate 0?
A workaround is to write function like this:
....but i don't like it. There is another solutions?
If you mean you want to change what you see in the cell, you do that with
formatting. Set the number of decimal places to 2. If you mean you want to
change what is displayed in the formula bar, I don't think that is possible.
On Fri, 09 Sep 2005 14:56:49 GMT, ...Decimal alignment
Operating System: Mac OS X 10.6 (Snow Leopard)
How do I align decimals in a word document? I know it has something to do with setting tabs, but I can't seem to get it right when I tried to figure it out myself! Thanks so much.
Why are you trying to "figure it out" for yourself?... That's what Help is
for :-) See the topic: Set tab stops
On 2/7/10 6:37 PM, in article 59bb26da.-1@webcrossing.JaKIaxP2ac0,
"email@example.com" <firstname.lastname@example.org> wrote:
> Version: ...decimal
Hi. How do you enter 400. into Excel? The important part is to leav
the decimal place after the second zero. I've done everythin
imaginable but the decimal always get erased after I hit enter. Than
oshiroty's Profile: http://www.excelforum.com/member.php?action=getinfo&userid=1473
View this thread: http://www.excelforum.com/showthread.php?threadid=26352
Format the cell for TEXT before typing the 400. or type a leading
apostrophe, like '400.
The apostrophe will not show up in the cell...Two digit number with one decimal, or three digit number
I would like to have one decimal point in a number, unless the number is 100
in order to fit the columns in a table. So, three digits for whatever number
I type in, and if it is two digits, to have a decimal.
100 - NOT 100.0
123 - NOT 123.0
> I would like to have one decimal point in a number, unless the number is 100
> in order to fit the columns in a table. So, three digits for whatever number
> I type in, and if it is two digits, to have a decimal.
&g...Aligning columns in excel
I'm trying to create a graph in excel.
There are three columns in excel.
First one is the case label.
Second and third are values for separate trials.
The graph style i'm using is the column graph.
Whenever I try to create this graph, there is always a little bit o
space between the first column and the Y axis. How do I get rid of th
I tried setting "Gap Width" in the Options tab of "format data series"
its butting them all up together, not really the effect I'm lookin