Tab Order in a Contact Form
I created a custom form, adding both buit-in fields and custom fields to the
General page. However, when I go to Layout/Tab Order, only the built-in
fields that exist on the built-in Contact form show up in the list. Is there
any way for me to get the other built-in and custom fields to show up in the
Tab Order list?
All controls (note: not fields) should appear in the tab order, but if you
put some inside a frame, that frame will have its own tab order. Select the
frame, then invoked the Tab Order dialog.
FYI, there is a newsgroup specifically for Outlook forms issues...Exchange tasks tab on domain controllers
When we were running Exchange 2K, I could add a mailbox
from any domain controller, but can't now that we've
migrated to Exchange 2K3. Was this a function of
connection agreements in Exchange 2K/5.5? Is there any
way to re-enable this functionality? Thx.
Phil: Thanks much. Is it my imagination, or are details
like that hard to find? P
>On the domain controllers that are not running Exchange
run the Exchange 2003 CD install on them. Install the
management tools option. This will enable the tabs in AD
on that domain controller. And, yes, ...Combine tabs from multiple workbooks into one
I was given twelve workbooks (one for each month). Each workbook has one tab.
What is the fastest way to combine the twelve workbooks (thus the twelve
tabs) into a single workbook? I can open each workbook and move each tab
individually, I just thought there might be a more efficient way. Any ideas?
Thanks for your help.
Regards Ron de Bruin
"Alayna" <Alayna@discussions.microsoft.com> wrote in message news:DCBB3B63-84D1-48BD-86D3-7F1D72E99C1C@microsoft.com...
>I was given twelve workbooks...Icons change on IE tabs when using tabbed browsing
I've recently begun experiencing issues with the icons assigned to a site
being changed on the tabs during tabbed browsing. For example, when clicking
on NOAA on my favorites bar to look at weather from the NOAA site, I began
getting the Wells Fargo icon on those tabs. The icon is still okay on my
favorites bar, but now consistently shows the WF icon on tabs. I tried
reassigning a new icon to NOAA, and it seemed okay for a while, but now I'm
back to getting WF icons on NOAA tabs. This morning I had a lot of tabs open
and suddenly my Fidelity icon was replaced by the Y...Email Tracking Tab
A gentleman I work with has his setup so he can go into his Sent Items and
look at the tracking tabs on the messages. He's had this setup and working
for some time now, but recently this is no longer working. He has delivery
and read receipts requested for anything he sends. I can't find any logical
reason why he does not have the tracking tab anymore. I thought maybe it
only applied to messages sent to multiple recipients, but I sent test
messages and it didn't make any difference.
Did he already process the returned Exchange receipts? When they are marked
as read and ...Tab order after using pop up calendar on date field
After selecting a value in a date field by using the pop up calendar, the tab
order on the screen sometimes goes to the first dollar sign ($) on the screen
and tabs through each dollar sign until the last one is reached and then
starts tabbing through the fields starting with the first one instead of just
tabbing to the next field. This happens if the cursor was in a text or
number field and the value in the field was not selected (highlighted) when
the calendar button was pushed. If the date was typed in to the date field
(as apposed to selected using the pop up calendar) then the su...tab not tabbing to next cell
Tab button is moving to next page, not next cell. Is there
a setting for this somewhere ?
It's trying to act like Lotus 123. Tools - Options - Transition -
Transition navigation keys. Turn it off.
mvpearl omitthisword at verizon period net
"lynn" <firstname.lastname@example.org> wrote in message
> Tab button is moving to next page, not next cell. Is there
> a setting for this somewhere ?
Perfect. Thanks !
...tab order #8
can you specify a tab order in excel?
for example. can I specify the folowwing tab order:
and ofcourse how?
daolb's Profile: http://www.excelforum.com/member.php?action=getinfo&userid=24478
View this thread: http://www.excelforum.com/showthread.php?threadid=382504
Take a look at http://www.xldynamic.com/source/xld.xlFAQ0008.html
"daolb" <email@example.com> wrote in
message news:daolb.1raiy...Tab from one page to the next page in Tab Control
I'm stumped!! How do you get your tabs to go from one page in tab control to
the next page? Right now, when I get to the bottom of the page, it tabs back
to the top. I am using Access 2003 with Windows XP. I want to be able to tab
from one page to the next as I complete my form.
Any help is appreciated.
You'll need to use code to set the focus to the first control on the second
tab in the LostFocus event of the last control on the first tab:
Private Sub Control1_LostFocus()
Doug Steele, Microsoft Access MVP
http://I.Am/DougSte...worksheet tab size
I have an Excel workbook with multiple worksheets running
on a HMI touchscreen display terminal. The sheet tab
height is too small for easy selection with the touch
screen. Changing the default font size increases the
height of cells, but doesn't affect the sheet tabs.
Is there any way (other than changing the display's
resolution) to increase the size of the sheet tabs?
>I have an Excel workbook with multiple worksheets running
>on a HMI touchscreen display terminal. The sheet tab
>height is too small for easy selection with the tou...tab textbox by a macro
I have some textbox in a user form...
I start on textbox1 and then once it is filled in a click commandbuttom1..
This click will populate some data then I then would like the cursor to move
How do I do it with a macro and not expecting user to hit tab or enter?
At the end of the code run by CommandButton1 insert the following.
"Alberto Ast" wrote:
> I have some textbox in a user form...
> I start on textbox1 and then once it is filled in a click commandbuttom1..
> This...Saving default tabs
I can't seem to get a change in the default tab setting to
When I reopen publisher the tab setting reverts to .5
which was original default.
I'm I the only person who is having this problem? I'm
using the 2003 verson but had the same problem with 2000.
Why not take the default page, set the tabs you want and save it as a
template with a file name of,
"My Very Special Tabs Settings for Future Files.pub"
(jerking your chain a bit<G>)
Then when you want to create what you want, use your created template file
and when your pub file is what you want, do a Sa...IE8 Open new tab
hi, wondering how to set new tab to open to a web page. had that set before,
but had to reset my IE8, lost settings. thanks
Tools>Internet Options - General tab, Tabbed Browsing 'Settings' button.
Sounds like you have turned off tabbed browsing sometime. Maybe with the
"Dan" <Dan@discussions.microsoft.com> wrote in message
> hi, wondering how to set new tab to open to a web page. had that set
> but had to reset my IE8, lost settings. thank...sheet tabs is checked but I can't see my tabs
I'm using a workbook with several pages. Yesterday I had no problems seeing
my tabs but today, the only thing at the bottom of the page is a bar that
says "Ready" in the far left corner. I do not see my tabs and do not know
how to move between the pages. Can anyone help me?
and resize them the way I like.
I'm guessing that the tabs are just off the screen.
> I'm using a workbook with several pages. Yesterday I had no problems seeing
> my tabs but today, the only thing at the bott...Recover mailbox from deleted account
I had a request to recover data from a former employee's mailbox. The
employee in question has been gone for about a year. I was able to
resorte the Private store to the RSG, and I can see the mail-box
listed, but I can't seem to get to the mail data. I have tried
recreating an account with the same name, that has not worked. I have
tried exmerge, and that also has not worked. I am sure the issue has to
do with the SID of the original account missing, but is there any way
to get around this? Using Exchange 2003 native mode. BE offers during
recovery to recreate accounts, and if I have ...tabs inside a tab
i have a tabbed dialog, in which on one of the tabs i intend to added
to have sub-tabs.
which is the best way to add tabs can we use CPropertyPage or should
we go with CTabCtrl.
Thanks in advance,
I would use CTabCtrl. But it's a matter of preference. CTabCtrl will give
you more flexibility than using a CPropertyPage as a child control.
"chandra" <firstname.lastname@example.org> wrote in message
> i have a tabbed dialog, in which on one of the tabs i intend to added
> t...recover delete file option
I am looking for infomation on how to partially disable the Recover
Deleted Items functionality in Outlook. I want the "dumpster" to
operate as usual, retaining deleted
items for a specified number of days for each mailbox store, but i want
to grant only administrators the ability to recover deleted items. My
company needs to be able to
recover deleted items for litigation purposes but didn't want the users
to be able to intentionally or accidentally destroy evidence.
Thanks for any help.
not possible, that I'm aware of...the mailbox owner can delete at will...you
can eith...Tab Contol Question
I have a form that contains a Tab Control.
I would like to setfocus to a specific control on each tab when the tab is
activated, but can not find any event that provides this ability when the
tab is selected. I can only find "On Click", "On Dbl Click", "On Mouse
Down", "On Mouse Up", and "On Mouse Move" which applies to the entire tab
area itself, not just the tab name.
Am I outside of the box on this one?
>I have a form that contains a Tab Control.
>I would like to setfocus to a specific con...tab order (VC6)
I'm trying to use tab order at design time to show one component above
the other. I have two labels and two picture controls. I'm using only
standard VC6 controls. First picture shows above label, but I can't force
second picture to show above label. :( Please, help.
In my experience, tab order does not alter drawing order.
I've usually worked around this by drawing the background image on the
dialog box itself by overriding CMyDialog::OnPaint() - it's possible to use a
hidden static control to make the size and location accessible in the
Can't seem to get this to work for me. All I get are original files in the
auto recover pane and the work is lost when excel crashes. (excel 2003)
In options it is set up to auto save every 2 minutes and the location is
specified -but there are never any files there.
If you have more than 1 file open does only the active one save?
Excel 97 and auto save worked great
Thanks for any help
...Copy a cell from a diferent tab when the tab name is in a cell
I have the name of a tab within a cell. How do I use this cell to look up
data on the tab.
Tab 1 has the following entry:-
I wish to use this entry to go to the Road 1 tab and look up data held in
Road 1 could then be updated to Road 2 and I then wish it to go to the Road
2 tab and display information from the same cell i.e. cell M6
Where A1 has the sheet tab name.
"Ann" <Ann@discussions.microsoft.com> wrote in messag...Protecting Tabs
Is there a way to hid a tab and make it so no one else can unhide it
Message posted from http://www.ExcelForum.com
In VBA you can set the Visible property of the sheet to
xlVeryHidden. The only way that the sheet can be made visible is
with VBA code.
Microsoft MVP - Excel
Pearson Software Consulting, LLC
"eroszzz >" <<email@example.com> wrote in
> Is there a way to hid a tab and make it so n...Tab Key acting like Alt-Tab
Lately, when I've been trying to use the tab key, I get that Windows switch
thing that supposed to happen when you alt-tab. I don't know whether I'm
doing something to make that happen or need to re-map my keyboard. It
usually starts after I'm using FaceBook weirdly enough. Any ideas?
Could be option enabled in "Ease of Access" (used to be called by a more
sensible name "Accessibility").
So check those options, e.g. 'sticky keys" options, etc.
If that doesn't solve issue, are you sure "Alt" is not faulty i.e. not stuck...Select all tabs after a certain tab
Hi, Many thanks to Ryan for help on Deleting tabs.
I am now after a way of selecting all tabs regardless of amount after a
The reason for this, is so that I can copy to a new workbook.
Again, many thanks for help
The macro below will copy sheets from the activesheet to a new workbook.
MS Excel MVP
Dim i As Integer
'if multiple sheet are selected, just select the activesheet to start
For i = ActiveSheet.Index To Sheets.Count
ActiveWindow.Selecte...Link to a tab
Can you link a cell to the name in a worksheet tab?
I have five tabs open across the bottom and one of them is called
records. Can I make a cell in the records tab simply say "records?"
So when I name a tab cell a1 mimics that name.
The file must be saved for this to work:
Please keep all correspondence within the NewsGroup, so all may benefit !