Receiving in fewer parts than required

When we are creating a sub-assembly we will create a MO for the amount of 
finished goods we will get if all the parts successfully pass inspection.  
For example, we will start out planning on making 15 sub-assemblies and end 
up with only 10, which is ok because we expect some losses during processing. 
However since we initially set up the MO as requiring 15 pieces but only 
ended up with 10 we will never be able to "complete" the MO even though its 
not necessary for us to do so (i.e. we have enough finished sub-assemblies to 
continue production).  How can we complete the MO even though the required 
ending quantity for the MO has not been satisfied?  
We are still using the original component amounts allocated for the order 
but need
 to change the required ending quantity, or at least manipulate the system 
so that it does not think the entire MO needs to be recieved in order for it 
to be completed.  Is there any way to do this without having to reverse 
allocate the MO and changing the quantity to whatever it is we end up with?  
Can inventory somehow manipulate the required quantity from their end?
0
qdi (1)
9/11/2007 7:36:01 PM
greatplains 29623 articles. 3 followers. Follow

1 Replies
468 Views

Similar Articles

[PageSpeed] 14

Whenever you do the last MO receipt, mark the checkbox to 'Use all material 
issued to WIP', then go to the MO Close window (Transactions > Manufacturing 
> Manufacturing Orders > MO Close in 9).  On that window you want to select 
Starting Quantity as the calculation option.
-- 
Jim@TurboChef


"qdi" wrote:

> When we are creating a sub-assembly we will create a MO for the amount of 
> finished goods we will get if all the parts successfully pass inspection.  
> For example, we will start out planning on making 15 sub-assemblies and end 
> up with only 10, which is ok because we expect some losses during processing. 
> However since we initially set up the MO as requiring 15 pieces but only 
> ended up with 10 we will never be able to "complete" the MO even though its 
> not necessary for us to do so (i.e. we have enough finished sub-assemblies to 
> continue production).  How can we complete the MO even though the required 
> ending quantity for the MO has not been satisfied?  
> We are still using the original component amounts allocated for the order 
> but need
>  to change the required ending quantity, or at least manipulate the system 
> so that it does not think the entire MO needs to be recieved in order for it 
> to be completed.  Is there any way to do this without having to reverse 
> allocate the MO and changing the quantity to whatever it is we end up with?  
> Can inventory somehow manipulate the required quantity from their end?
0
jim.harris (398)
9/11/2007 8:48:01 PM
Reply:

Similar Artilces:

I m receiving my email but after received it is not in my inbox
When I open the outlook and click on send/receive, I receive all the emails, but I could not find the downloaded email anywhere. It's not in my inbox or any of the folders that I have created. The unread mail also does not change to reflect that new emails have arrived. Could some one help me out here. Thanking you in advance. If you check your whole folder tree (composed of multiple PSTs possibly), are any folders showing as bold? "INAVAB" <INAVAB@discussions.microsoft.com> wrote in message news:7708D9D4-47D5-44FD-9983-89F13F35BCEA@microsoft.com... > When I open...

Pictures Received Are Garbled
Hi, I have been receiving emails with pictures from certain people, but the pictures are shown as text. As if I had opened a jpeg with a text editor. Not all pictures come in this way, only in emails from certain people. How do I (or they) make it stop? Marebear wrote: > Hi, > > I have been receiving emails with pictures from certain people, but the > pictures are shown as text. As if I had opened a jpeg with a text editor. > Not all pictures come in this way, only in emails from certain people. > > How do I (or they) make it stop? Anti-...

copy part of cell contents to another column
I have an Excel sheet in which one of the columns contains e-mail addresses. I'd like to add a new column that contains the domain portion of the e-mail address (so basically anything after the @ sign), and keep the original column in tact. Is this possible? If so how? Thanks!! If the addresses start in A2, put this in the new column: =MID(A2, SEARCH("@", A2)+1, 999) -- TedMi "Glenn" wrote: > I have an Excel sheet in which one of the columns contains e-mail addresses. > > I'd like to add a new column that contains the domain portion of the e-m...

Cant send or receive emails
I've done something to my settings, and cannot send or receive emails. Can anyone tell me what to do? And I'm not a newby either, shame shame! thanks. Kari Error message? Version of Outlook? Type of mail account? Checked your mail account settings already? -- Robert Sparnaaij [MVP-Outlook] www.howto-outlook.com Tips of the month: -What do the Outlook Icons Mean? -Create an Office 2003 CD slipstreamed with Service Pack 1 ----- "Kari Jacob" <jacob52@optusnet.com.au> wrote in message news:549201c49180$ec8cfa40$a501280a@phx.gbl... > I've done something to my...

Problem with serial receive
I have a receive thread for a serial com port. I'm calling WaitCommEvent with an overlapped structure to get events. The event mask is EV_BREAK | EV_RXCHAR | EV_ERR. I also have an overlapped read operation to get receive input. Both events are setup with auto-reset. The port works fine until I get an error. When an error occurs on the receive line the read event is signaled and the call to GetOverlappedResult returns 995 Operation Aborted (the thread has not exited). I then get a WaitCommEvent signal. I call ClearCommError() which returns a CE_RXPARITY error. I thought ClearComm...

Receive email in real-time
We have several PCs in our company that are receiving Exchange email messages in real-time, whereas others have to click Send/Receive within MS Outlook to receive their email. How do I setup Exchange where all users can receive their email instantaneously on any machine in the organization onto which they logon. Thanks in advance, Mervin Williams Hi, You can't configure Exchange to not deliver emails instantly to Outlook users. This is an Outlook setting and will have to be configured here. Leif "Mervin Williams" <mwilliams@innovasolutions.net> skrev i en meddelel...

Send & Receive button doesn't work
I installed Office XP and the SP3 service pack. I can't get the "send and recieve" button to work in MS Outlook. Everytime I click it I get a error message "The operation failed. An object could not be found." I tried proposed resolution in from MS knowledge base article 312354 but it didn't fix the problem. Any suggestions on the fix? i'd follow the procedure for creating a new profile again first. if that fails, try a repair operation. "Tom" <anonymous@discussions.microsoft.com> wrote in message news:0b0d01c425ad$17305570$a401280a@...

Received Not Invoiced not = GL(205000-000-000 Received Not Invoic
I am working on some questions for an audit, and was asked why when we run an RNI report [Reports>Purchasing>Analysis>Received/Not Invoiced] for a specific date range, it doesn't match the [Summary Inquiry] numbers. Shouldn't you be able to run a report that selects the RNI from the POP tables for a specified date range and the GL20000 (acct code 20500-000-000) for the same date range and come up with the same result. I figured out the answer, never mind! "Rich" wrote: > I am working on some questions for an audit, and was asked why when we run an > RN...

Send/Receive Operation Failed
Hey Folks, Symptom: I was receiving an "Operation Failed" message when pressing the Send/Receive button. Background: I tried the trial of Office 2003, reverted back to Office XP. After re-install of Office XP, Outlook resumed all previous settings, however the Send/Receive function was inoperative. Fix: After some searching and experimenting, the solution was found in Microsoft Knowledge Base Article - 284312. After shutting Outlook down, finding the Outlook file with the extension *.srs, renaming it to *.old, and restarting Outlook, the Send/Receive function resumed n...

email stuck in outbox: receiving error message
My emails are stuck in my outbox. They do send to the recepient, but never switch over to my sent box. Go to the 'Tools' menu, then options. In the first / 'Preferences' window that appears (tab shown at the top) click on 'E-mail Options'. Make sure there's a check mark in the box that says 'Save copies of messages in Sent Items folder'. If this is already done, you might want to note the exact text of the error message and do a search in the Microsoft Knowledge Base. >-----Original Message----- >My emails are stuck in my outbox. They do s...

Forwarding mail received from a receive-only account to a send/receive account
I am trying to setup Outlook 2002 (SP3) to pop mail from one of my accounts. This account (Account1)is receive-only, that is in the Send/Receive group settings I have setup the account to "Receive mail items" but not to "Send mail items". I have existing rules that forward mail that I get from certain people, and I have another account (Account2) which I have setup to send and receive. However, when I receive mail from Account1 that matches the rules, the mail gets forwarded(sent) using Account1 even though the Send/Receive group settings say the account is receive-only. ...

Hiding Received Items on Purchase Orders
Is there a way to hide already received items on a PO? That is, can a revised PO be printed that only shows remaining open items (backorders). On that same note, is there a way to print out a "Receiver" or "Check-in Sheet" for my staff to check in orders against, as opposed to the actual purchase order, which shows more information than I'd like shown... Thanks for any input!! ...

Sending and receiving
I can receive e-mail but cannot send. I've checked my settings - they are the same as Outlook, which I used on my old XP computer. This is a new Win 7 computer. Copy and paste the entire error message for analysis please . ... . "Railroad Henry (not John)" <RailroadHenrynotJohn@discussions.microsoft.com> wrote in message news:120A3A4D-6860-46AC-A94E-C7CB0AB7AD34@microsoft.com... > I can receive e-mail but cannot send. I've checked my settings - they are > the > same as Outlook, which I used on my old XP computer. This is a new Win 7 > compu...

Preventing changes to received messages
Outlook allows me to modify a received message's body and subject field. So if Bob sends me an email, I can open it, change the body's content, save it, and it looks like that's how I received it. Then if I print or forward it, it looks like Bob sent me something he in reality didn't. Is there a way to disable that? Can the integrity of a received message be protected? Can this be done without digital signitures? Hi, I do not think that is possible !!! Sorry for that . Hope this helps !!! With Regards, Sudharson.AN "Hall" <hall@garp.org> wrote in mes...

Send/Receive failure
Hey all - I work for a school district that is running Outlook 2000 SR-1 and an old version of Outlook Express. Every time a user clicks on send/receive it times out and says that server such and such can't be found.... But if we close down that "error" box and click on send/receive again it works. Every time! Anyone have an idea why it "dies" on the 1st attempt and then is successful on the 2nd? I can't see any setting in either version that would make this happen. Thanks. Jim D. ...

unable to receive email from a certain user
I have a problem where I am not receiving email from a certain user within our organization. I am able to receive all other mail, from other users, but when this user sends me mail.. I never get it. It shows as sent from the sender, and I dont have any rules in place that would be moving it from the inbox. Any thoughts?! Please help!! -Justin is the user able to reply to mail sent 'from' you? have they got the correct spelling of your name etc? "Justin" <jhenretta@pwlink.com> wrote in message news:066801c3aeed$4bd6db00$a101280a@phx.gbl... > I have a problem wh...

Include this account when receiving mail or synchronizing
Hello, In OE I have the option to check mark "Include this account when receiving mail or synchronizing". Where does OL has this option? Thanks, AJS Tools-> Options-> tab Mail Setup-> button Send/Receive...-> button Edit... -- Robert Sparnaaij [MVP-Outlook] Coauthor, Configuring Microsoft Outlook 2003 http://www.howto-outlook.com/ Outlook FAQ, HowTo, Downloads, Add-Ins and more http://www.msoutlook.info/ Real World Questions, Real World Answers ----- "AJS" <newsgroup@sorga.com> wrote in message news:#0XRNuWrJHA.3992@TK2MSFTNGP04.phx.gbl... > ...

Receiving emails ... or rather NOT receiving
I get to message #5 and won't download. I now have over 200 emails waiting to be downloaded to my Inbox behind email #5. Anybody know how to remove this #5 email that is blocking everything else????? Logon to your mail server's Webmail page and delete the offending message from there. -- Bruce Hagen MS-MVP [Mail] Imperial Beach, CA "Lynda" <Lynda@discussions.microsoft.com> wrote in message news:794E9864-FEAD-4C19-B958-293595B19762@microsoft.com... >I get to message #5 and won't download. I now have over 200 emails ...

Receiving Duplicate Email Messages
Hello Everyone, I am hoping someone may be able to help shed some light on this problem. We use Sunbelt's Ninja Messenger for spam filtering on an Exchange 2003 SP2 server for about 6-7 months now. I have been finding the past two months or so that about half of the messages we receive to our spam filtering mailbox are duplicates. One email is usually html or rich text with images, fancy text, animations whatever, the other email will be a duplicate in content but it will be text only with no formatting. I had posted this on Ninja's support forum and got no real advice. I am t...

user mailbox receive size
I need some help rectifiying a situation I have verified with ms kb322679 on how to set size limits for messages in Exchange and although i have set the limits to its highest limit possible or no limit at all i still have failures on receiving file attachements greater that 10 meg in size. Any help in this matter would be greatly appreciated ...

Receiving in fewer parts than required
When we are creating a sub-assembly we will create a MO for the amount of finished goods we will get if all the parts successfully pass inspection. For example, we will start out planning on making 15 sub-assemblies and end up with only 10, which is ok because we expect some losses during processing. However since we initially set up the MO as requiring 15 pieces but only ended up with 10 we will never be able to "complete" the MO even though its not necessary for us to do so (i.e. we have enough finished sub-assemblies to continue production). How can we complete the MO eve...

Send/Receive doe not work... I can send but not receive in Outlook
I have my Yahoo (pop3) account set up in Outlook and have done for some time. It has just decided to stop retrieving my incoming mail, however I can still send mail through outlook. It is set up to leave a copy of all messages on the yahoo server so I can access this through Outlook on my office compuer also - this works fine. The problem is with Outlook on my home PC. When I hit Send/Recieve nothing happens, not even an error message. Can anyone help? I can't find anything online. Thanks a mil! What kind of service do you have? I'vehad problems like that with Verizon DSL, but...

mass emails...... outlook showing sent but not received by anyone
New computor....I must have something set up different than before in Outlook because the email blast appears to have been sent (shows in sent file) but not received. I have been sending this blast successfully for several years, but with new computor having troubles. Any ideas? is your SMTP server blocking them as spam? or their server treating them as spam? -- Diane Poremsky [MVP - Outlook] Author, Teach Yourself Outlook 2003 in 24 Hours Coauthor, OneNote 2003 for Windows (Visual QuickStart Guide) Need Help with Common Tasks? http://www.outlook-tips.net/beginner/ Outlook 2007: http:...

Unable to Send/Receive -- Can't PING Email Server/IP Addresses
Hope someone can help: Have the following programs,up to date: --Outlook 2000 --Windows XP Pro(upgraded from Windows 2000Pro 2wks ago) --Norton 2004 Firewall/Anti-Virus --Ad-aware Have DSL Internet, static IP address. Started out this morning OK with Internet access and sending receiving email through Outlook (non-ISP email server) At some point, Internet access was interrupted: page cannot display messages when trying to access homepage and other sites. Tried 10 minutes later - OK PROBLEM: Right after access interruption unable to send/receive any email. Telnet results to email server:&quo...

Send and Receive Option
On my desktop I have send and receive button/tab. Some how on my notebook, I have failed to check this option and so it does not show up. Could someone please help me to find where to check so that I always have at hand the option to send and receive. I would be grateful MS Office Outlook 2007 Thanks for any help Jerry Jerry wrote: > On my desktop I have send and receive button/tab. > > Some how on my notebook, I have failed to check this option and so it does > not show up. Could someone please help me to find where to check so that I > always have at hand the opti...