some type of pop up blocker
When i try to access certain areas of CRM 3.0, there is some type of pop up
blocker or something that will not let the next window open. I have disabled
my pop up blocker but it still occurs. When i put the mouse pointer in front
of the pop up blocker message, it states no pop ups were blocked. Some have
worked by holding down ctrl or alt but others will not open the new window.
Any ideas or suggestions?
MT - if you have any toolbars installed in IE (google, MSN, yahoo, etc)
uninstall them. there are lots of reported cases where disabling them isn't
good enough, you need to un...form text field wont change font size word 2007
I have read the other discussion this issue? But it does not make any sense
to me. I had a previously made a fill in form in a different version of
word, i found how to edit it by protecting and unprotecting the doc. The
font is set to comic sans MS, and when i fill in the fields, it makes them
another font and style? How do i get them to be the same font as the rest of
the document. Can someone put this in English for me? Thanks
You will have to apply the formatting to the text paragraph before inserting
Microsoft Word MVP
"dlb1228...Skip Group Header Sections if below Sections are Blank
The report I created is based on a quality evaluation form, which the
information is stored in SQL. The evaluation form has 6 sections with a
number of questions in each section. 3 of the sections will always have
answers, notes, etc. However, depending on the evaluation only one other
section will be used. When I run the report I created, it will list all
sections with blank areas for the sections that were not used in the
evaluation. What I want to the report to do is remove the sections with
blank fields, is this possible?
The report has 4 Group Headers:
*QGroupSequence He...In excel, how do i create a box on a form for a customer to click
how do I create a box on a email excel form for a customer to click on to
acknowledge they agree with the terms and it automatically put a check mark
in the box.
...Counting rows of blanks across certain columns
I have a survey whose answers were recorded in Excel. The answers for a
particular question extend from Q6 to Z505. I need to count the people who
did not answer the question (that is, the people, entered in rows 6 to 505
that left columns Q through Z blank). I'm not sure how to do this. Can
someone offer a suggestion?
You can use a formula like this in Column AA
copy down till AA505
You can use a simple Sum formula now to count the empty ones
Regards Ron de Bruin
"crossingboston" <...Workflow generated pop-up messages
I'm using CRM3.0. I would like to know if it's possible from within workflow
code (using c# code) to trigger a message (dialog box) back to the web client.
So for example if a field is null, display a pop-up message dialog back to
the web client such as: "You must enter a Search name before proceeding"
I know it's possible to perform validation from within Workflow manager,
however the workflow Manager as far as I know, cannot send dialog box pop-up
messages back to a Web client.
Note that using client side scripting event triggers is not suitable in this
situation, ...form logic
I'll try to explain the best I can. I have an customer orders form, w/ the
order lines being the subform. When a csr is going to enter in a new order, I
would like for an pop up form to open up as they enter in a part number if
it's specific criteria. For example, if any part number has a stop or a
warning on it I want my pop up form to come up. So what I did was on my
ItemID field, afterupdate, I put logic there as follows:
If me!CustOrderStop = 1 or 2 then
I need for the id to be carried to that form. How do I do that? I'...How do I put movie titles in alphabetical order
I want to put all my movies that I have into a folder and then have them in
alphabetical order so they will be easy to find. I'm new to using any of
these programs. Just installed Office 2003 Basic.
Any help would be greatful, and please put in easy to understand
instructions, as I am slow understanding things.
Putting movie titles into a folder does not involve Excel.
Do you mean you want to list your movie titles in an Excel worksheet?
Type them into a column then select that column and Data>Sort>Ascending.
Gord Dibben MS Excel MVP
On Wed, 9 Jan 2008 09:11:03 -080...pop sound !
I get a pop sound and I checked to find its a "system notification" well
nothing shows up on the screen so where can I check to see what its trying to
notify me of ?
> I get a pop sound and I checked to find its a "system notification"
> well nothing shows up on the screen so where can I check to see
> what its trying to notify me of ?
How did you find it was a 'system notification'?
How To Ask Questions The Smart Way
So are you te...OWA 2003 Forms Based Auth Not loading, HTTP 500 Error
I had a exchange 2003 on win 2000 Server working fine, I just moved over the
mailboxes to a windows 2003. Now I can't seem to get Forms to come up at
all. I install a certificate created by the windows 2000 Server. I get all
the other screen but once it get's past the, accept certificate screen, I get
an internal error, Http 500
Regular login works fine without the certifcate and I believe with as well.
Any help on this?
...if/then returns false instead of blank cell
If I put this formula into a cell it works fine and displays a blank cell if
A18 is blank, otherwise it displays cell A18:
If I put this formula into vb script (a click action on a button)the cell
now displays FALSE as the value, instead of a blank cell:
.Name = "Pay App 1"
.Range("O11").Formula = "=If(A18="","",A18)"
.Range("O13").Formula = "=If(A19="","",A19)"
.Range("O15").Formula = "...Opening a form from a Pop-up
I have a pop-up form I have created so that instructors can double-click on a
user number and a New Student form is supposed to open. I have done several
pop-up boxes to open other forms and they all seem to work just fine.
However, on this particular pop-up, when I double-click a number, I get the
following error message "The specified field '[UserNumber]" could refer to
more than one table listed in the FROM clause of your SQL statement." I am
using a query to draw the information and there is only one table being used
in the query. When I check the SQL statemen...Graph reverse order changes series order but not legend order
If I change the order of a graph in the axis properties the order o
the series is reversed as well as the order of the data, but not th
order of the legend. Is there any way to reverse the order of the grap
and keep the series order synchronized with the legend order beside
rebuilding the data set backwards?
Message posted from http://www.ExcelForum.com
...Pop Up comment not popping up
All of the sudden my pop up comments stopped working. In fact my macros
have errors and everything is wigging out. Does anyone have any
suggestions on what to try?
** Posted via: http://www.ozgrid.com
Excel Templates, Training, Add-ins & Software!
...Auto filter on blank lines
I have auto filter turned on and when I filter on something there are no
longer any blank lines at the bottom of the document (it's grey). I'm not
sure what I did to get rid of them but I'd like to have them back.
On Jan 28, 10:24=A0am, Allana McDonald <Allana
> I have auto filter turned on and when I filter on something there are no
> longer any blank lines at the bottom of the document (it's grey). I'm not
> sure what I did to get rid of them but I'd like to have them back.
> Tha...How do I get rid of blank pages between each page of reports
I am having a blank page put in between each of the pages of my reports and
it is throwing off the next page layout, how do I get rid of these blank
Most likely the design width of your report slightly exceeds 8-1/2" minus
the left margin minus the right margin you have set in Page Setup. This will
cause a blank page between each of the pages of your report. Decrease the
design width of your report or set your left and right margins smaller.
"Allen G." <AllenG@discussions.microsoft.com> wrote in message
I have a form with a subform and a subform inside the subform.
(Form/Subform/2ndSubform) When I go to a new record in the Form all the
fields in the Subform/2ndSubform are blank, which is good. When I go to a new
record in the Subform the information in the 2ndSubform stays the same.. I
need these to go blank... My realtionships are
tblMain tblVendor tblDescription
ID ------------ IDNum ------------ IDNum
Message posted via AccessMonster.com
1. From the database window, open the first sub...Exchange and POP email in same profile
Is it possible to have the Exchange address and a different POP address
exist in the same profile? I ask because, while setting up a new account on a
new computer, I've discovered that I cannot have the Exchange mail delivered
to "Mailbox - User1" (mail left on server), and at the same time modify the
POP account to have its mail delivered to the .pst on the local machine. The
dialog box only wants the mail delivered to one location, for ALL accounts.
Do I have to use two different profiles in this case? Using Outlook 2003 with
Yes its poss...Problem with selection behavior Text Form Field inside WORD table
I have a text form field defined inside a WORD table cell. When I create a
NEW document based on the form template, I can't get the text in this field
to select/highlight properly for editing. Instead of selecting from the
starting position of the cursor to the ending position of the cursor, it
highlights from the starting position to the END OF THE FIELD. Text in other
form fields, not inside a table, highlights as expected.
selection.moveright wdcharacter method moves the cursor to the end of the
field rather than the first character in the field's text
This is sn excel...PoP
I am trying to get email through windows setup how do I locate my POP3 and
all the other junk they ask me for?
"Owner" <firstname.lastname@example.org> wrote in message
>I am trying to get email through windows setup how do I locate my POP3 and
>all the other junk they ask me for?
You will find all the junk you need here:
How to set up gmail in Windows Mail:
MS-MVP. MAIL. [DTS] UK.
...Problem Passing Parameter from Form
If I hard code in the following into the critera:
Any record that starts with T is not returned.
If I pass the same thing, [!T]*, from a form to:
Nothing is returned. Why can’t I pass, [!T]* from the form and get the same
results as if I hardcode it into the criteria?
When you pass it from a form, Access sees it as a string. It looks like:
"[!T]*" which isn't the same thing as [!T]*.
You might be able to create an SQL statement in a VBA module and get it to
Jerry Whittle, Microsoft Access MVP
...Invoice for less than the quantity ordered
We have a company who uses Great Plains that sells every item as drop ships.
They sell a lot of products with a unit of measure of Ton. When the product
is delivered it can never be delivered for the exact amount ordered (ex.
ordered 25 tons, gets 24.877 tons when delivered). So, when we enter the
invoice for the PO there is always a little bit left over that we need to get
rid of. MBS Support gave me a way to be able to delete what is left but it
is a lot of steps for someone to have to go through for every invoice. Plus
in order to invoice for less than what was ordered on the sa...keep getting error message pop-up windows
I wonder if anyone might be able to help me out. I keep on getting this
error message from windows in the pop-up dialog box that shuts the database
off and created a backup copy and then ask if i want to send the error to
microsoft. This happens when trying to add a button onto the form to increase
more functionalities to the database. Apart from that, it works fine.
Initially i thought it could be to do with the size of the database but it's
only 10 Meg. Could it be anything else that trigger this problem?
BTW, this is Access 03.
Thank you in advance
This type of error sou...Control Button to Create a New Record in Another Form
I've developed a MS Access application for Trade Shows. One of my tables
contains all basic client info. This table is used as the data source for
both a complete client form and a partial data form. Both forms can show all
clients (individually). Using the partial data form I want to create a
button that copies the current record and creates a new record in a form
titled Trade Show Attendees. Other data in the Trade Show Attendees must be
entered to complete that attendee's record. Some of the data entered will
populate the TradeShow Attendees table.
Can anyone describe t...Reminders only pop up when Outlook is open
Hi, I've just migrated my diary/contacts from Palm Desktop to Outlook 2003.
(You can see that I'm not the most up to date!) I'm a bit startled to find
that I seem to need to keep outlook open the whole time in order to get my
calendar reminders. Normally, I like to collect my emails twice a day, and
the rest of the time outlook stays closed.
Is there any way to avoid having outlook open the whole time, or at least to
get the program to pop down into the notification area so it's not
cluttering up my taskbar? Are there any 3rd party apps. that deal with the