Can't receive mails from Hotmail & MSN accts
Hotmail and MSN users can't email to our work domain. As soon as the user
hit send, the mail get bounced back as undeliverable. Checked our work spam
guard, and the mails are not reaching to the spam guard. All other emails
have no problem getting to us. Any ideas? Thanks in advance.
Please post the text of the bounce message.
"Roget Luo" <email@example.com> wrote in message
> Hotmail and MSN users can't email to our work domain. As soon as the user
> hit send, the mail get bounced back as undel...How to remove/delete/void a PO that is released
How can I delete a PO that has a status of released?
On Jan 14, 2:49=A0pm, DonMcCPA <DonMc...@discussions.microsoft.com>
> How can I delete a PO that has a status of released?
> Don McCready
I recommend not do delete but close PO ? Is it fully Received ? and PO
still show in Inquiry .
above link will hel you to resovel to close po.
Three things must happen to achieve what you've described:
1. Can...subreport between each entry on the report
I have created a report that has entries 1,2,3 and 4. I want to add a
subreport which has 2 more entries. However, when i try to do so, the entries
for the subreport show up in between those on the report. This is not what i
want. I want the subreport entries to show up below those of the main report.
How do i do this.
Put the subreport in the report footer.
Put the subreport in a group footer that is printed after your details
Access MVP 2002-2005, 2007
Center for Health Program Development and Management
University of Maryland Baltimore County
"...Problem to modify the size of PlotArea
I am trying to modify a chart so that it prints in a 20cm x 17,5cm frame. I
do understand that this is governed by the plotarea.insideheight and
plotarea.insidewidth properties. I also do understant that these properties
are read-only. So far my code is the following:
.SizeWithWindow = False
.PageSetup.ChartSize = xlScreenSize
.PlotArea.Width = 567
.PlotArea.Height = 496
Do While .PlotArea.InsideWidth < 567
.PlotArea.Width = .Pl...I can't see my last posted question and asnwer
This page shows shows in Forms coding that I have 18 messages, however, I
cannot see my last question and respective answer.
Could you me reason about it.
The name of this group is...
I only see two posts from you recently
Sunday, April 18, 2010 2:22 PM
Filter Juction Table and related tables.
Saturday, March 06, 2010 10:02 AM
Re: Can I still use check boxes?
I can not say why you can not see those posts, but you could
use Google Groups, f...EXE change in data modified
Have a question regarding GP. What can cause a change in the "modified
date" to the dynamics.exe file?
In theory, something would need to change the file. My best guess would be a
service pack would change the date.
> Hi Guys
> Have a question regarding GP. What can cause a change in the "modified
> date" to the dynamics.exe file?
For GP 9.0 SP 1 the Dynamics.exe modified date is 5/16/2006 which looks to
be the date the Service Pack was created (as opposed to the da...Exchange 5.5 server shutdown
We shut down the last Exchange 5.5 server in our organization. Now in
our exchange 2003 server we are getting the below event viewer errors.
I have verified that we have no ADC entries that are running, and I
have deleted the Connector that was referencing the *0105 server
mentioned. This error is occuring between 12am and 6am. I have
looked at Q288828 and Q821828 for information but I have not found
what I need. Any thoughts, I suspect Im missing something that is
referencing back to the old 0105 server but Im not seeing what is
Source: MSADC Category: LDAP Operations Event...Modifier Error
Whenever we try to go to modifier it gets the following error.
The Modifier is currently unavailable because another user is editing
resources in the Forms Dictionary.
The Server has already been rebooted but we are still coming up with the
make sure that you are not sharing the Forms Dictionary with another
"Jess M." <JessM@discussions.microsoft.com> wrote in message
> Whenever we try to go to modifier it gets the following error.
> The Modifier is current...Payroll 2010 HIRE Act tax reporting
Does anyone that has installed the Tax Update Round 5 for GP found a way to
get the FICA SS Employer credit for an individual pay period? We have a
client who wants to know what other users are doing to compute the breakdown
of the FICA SS vs. FICA Med Employer so that they can fill out their Federal
Deposit with accurate numbers reflecting the reduction of the FICA amounts by
the W-11 Qualified Employees SS wages x .062 for the employer portion that is
I have one other client that is creating a Smartlist of the New Hires based
on start date, then manually removing ...modified timeline graph
I have a table of dates and events (and "phase"), and I want to make a
timeline graph: 1-d horizontal line, no (visible) y-axis.
I want the distance between the events to be spaced based on the date,
and the event names to be shown at each point. The dates should be
shown too, either for each event or just based on auto-scaling of the
x-axis (e.g. major unit = 3 months).
Here's the hard part. The events happen in different "phases", and I
want to show the phases graphically somehow. I was thinking this
component of the graph would be a bar chart, and I could someho...displaying query and report in order by day and month
I have a query that I want to run a report from, my query uses month and day
as separate fields as is the year, for example January is just that January,
and the days are 1,2,3,etc.. this is so the user can use a drop down menu
from the form to select the date. When i run my query by year it lists the
months out of chronological order: February first then January, as opposed to
the other way around. When I run by specific days in a month it displays the
days out of order as well, regardless of trying to sort by ascending or
descending. My dates would go in this type of order: 1,14,1...not all incoming emails received
As usual, the MX record is pointing to the static IP (nslookup showed
it was correctly done) The SMTP port is opened on the firewalll, the
exchange server 2003 SP2 is healthy, dcdiag showed no errors, no DNS
Almost all incoming emails are received from the inside and outside.
But, for a reason or another, some people are having trouble to send us
emails, we are not receiving their emails. But they can send the same
email the other people.
the antispam (Trend Micro) doesN't block the emails from them (I even
put them on the white list)
I've done a lot of diagnostics and tes...Modify name displayed in GAL
Is there any way to change the manner in wich user are displayed in GAL?
I've been aked to set DislayName to "First Last", but leave "Last First" in
GAL - is there any way to do this? Thanx
...Closing po without commiting stock
hey, is it possible to change the status of an open purchase order to a
You could do it by a SQL Statement but I am not sure why you would want to
mark a PO Closed that is Open (effectively a PO that has not had any items
received on it). Why not just Delete the PO? (You should never delete a PO
that has items that were received on it.)
Unless this is a Partial PO and you want it Closed. If it is you can open
the PO for Receiving and with out changing any of the Qty Received field
press the Comit button you will be asked if you want Close the PO whic...add meeting to journal entry
I am trying to add appointments to my journal entry's and the only options is
shows are e-mail message, meeting cancellation, meeting request, task request
and task response. How can I automatically add appointments/meetings?
Appointments aren't journaled automatically. You can drag the appointment to
the journal folder to create a journal for the appointment.
Diane Poremsky [MVP - Outlook]
Outlook Tips: http://www.outlook-tips.net/
Outlook & Exchange Solutions Center: http://www.slipstick.com/
Outlook Tips by email:
mailto:dailytips-subscribe-request@lists....one more point about last post
I use outlook 2003.
Thanks for your help.
> I use outlook 2003.
> Thanks for your help.
So why start a NEW and *disconnected* thread about it rather than add your
post to the EXISTING thread?
...People who post Ubuntu countdowns here are complete RETARDS
Some mentally deranged posters are using the forum to post daily countdowns
to the next INFERIOR release of that CRAPPY Ubuntu that NOBODY needs or
wants. It is best to ignore those posts.
Electro Lytes wrote:
> Some mentally deranged posters are using the forum to post daily
> to the next INFERIOR release of that CRAPPY Ubuntu that NOBODY needs or
> wants. It is best to ignore those posts.
Electro Lytes wrote:
> Some mentally deranged posters are using the forum to post daily countdowns
> to the next INFERIOR release of that CRAPP...modify online services
My bank recently upgraded their online services to
include Direct Statements. Previously I had set up to
receive Web statements. Money 2004 Omline services
Manager does not give me the option to "modify services"
only to "change financial institutions." Any ideas on
how I can modify online banking services so I can use
background banking to get Direct statements?
This is how it works in M03: From account list -> Click manage online
services -> click Setup online services, then select the financial
institution from the list (assuming the list is updated wi...One Record at a time Report
I have a table with columns that represent different metrics on separate
Each investment is a separate row of the table.
Is it possible to have a Report based on the table that displays/prints each
row as a separate report?
>I have a table with columns that represent different metrics on separate
>Each investment is a separate row of the table.
>Is it possible to have a Report based on the table that displays/prints each
>row as a separate report?
Well, lots ot things are ...Journaling?
I'm familiar with the basic feature set and different levels of journaling
and have an issue where I only need to journal intra-domain traffic; is this
possible? To my knowledge there isn't a way to journal only internal traffic
via the built-in features, but I was thinking that perhaps with some creative
use of connectors perhaps I could accomplish the goal... any ideas? Or
could I be missing something with the out of the box journaling that could
help me out?
On Mon, 25 Jul 2005 12:47:33 -0700, Dan
>I'm famili...PO with non-inventory item
I have a PO and receivable of a non-inventory item and it does not increase
the quantity for the inventory. How do I fix this issue so that the
receivable will show the quantity correctly? Thanks!
GP is designed not to track movements of non-inventory item, thus it will
not affect the quantity in your inventory. However, receipt transactions on
non-inventory will update your accounts payable when posted.
Hope this helps!
Dennis Araullo, MACS
Microsoft Certified Technology Specialist GP,CRM,AX
MCITP Installation and Configuration AX 2009
MCITP Database Ad...GP7.5SP6
We're in the process of upgrading from GP7.5 SP4 to SP6. We are on MSSQL
Server 7.0. My supervisor has already implemented the hot fix as describe in
MBS (that's a script to update some indexes on the server if someone is using
GP7.5 manufacturing on MSSQL7). When I try to import modified forms and
reports I've received some errors. For instances some references on the VBA
to the GUI forms (i.e. text boxes, buttons) become missing. And on the
reports I've been told it couldn't find the table
MOP_MO_Variance_DC_Detail_Report_Temp and MOP-Sched_Interface_Report_Before....SOP Invoice is not posted
I get this message "This transaction was recovered during normal processing.
You continue processing the tranction" when I post invoice in SOP.
Any help will be appreciated.
...Search / Modify / Delete . . .
In �sheet1� I have a database with theses headers �Name, Phone, Address
and below are the records rows 2-150. In �sheet2� I have the data entr�
form (not VBA) its on the sheet, that has a macro that writes t
�Sheet1� (for storage).
How can implement a search for a record and return the result t
�sheet2�, with the ability to modify or delete from the databas
Thanking you in advance
Fable's Profile: http://www.excelforum.com/member.php?action=getinfo&userid=218
View this thread: http://www.ex...CRM3.0: How the SQL Reports handled, as RDL or RDLC?
my question is in the subject, if i use the SQL Reporting Engine for
Reports, how CRM handle the Reports, in which Format, RDL or RDLC?
thank you in advance,
According to the Microsoft CRM 3.0 SDK, you will use .rdl files to upload
reports. Please refer to the topic "Report Writers Guide" in the SDK.
Merijn van Mourik
> Hi folks,
> my question is in the subject, if i use the SQL Reporting Engine for
> Reports, how CRM handle the Reports, in which Format, RDL or RDLC?
> thank you in adv...