I am having the same prob that everyone else is describing, however
have looked on the Microsoft support forum. I did a search and did no
find the 2 Adobe files anywhere on my computer.
I also disabled the NAV plugin...... I am still haveing the sam
Is there any OTHER way to fix this without reformatting!!??
Thanks in advance
Message posted from http://www.ExcelForum.com
I think I'd shell to DOS and run an old DOS command:
dir c:\pdfmak*.xla /s
Or make sure you're looking through hidden folders and for hidden files, too
(windows explorer setting).
"spcinf <..."This operation cannot be performed." error
I noticed recently that I got a "This operation cannot be performed." error
whenever I started Money. The error details told me to run the Money file
Repair tool to fix the problem. I did a level 2 repair and the report
produced said "No broken records in the original file.". I still got errors
when I closed and further tried to reopen the file.
I then went into 'Bills' and started to delete a bill, then close/reopen
Money to see the effect. It came down to a single bill. I duplicated this
bill and deleted the original, now Money is working ok and not re...Error linking to my ATL dll
I'm using VS2005, building a WM5 application.
The dll is a ATL com dll providing network services to my app.
I've tested the dll with a simple dialog app, but now I try to link
to my application I get
.... io 8\VC\ce\atlmfc\include\atliface.h(591) : error C2143: syntax
error : missing ',' before '.'
which points to
virtual HRESULT STDMETHODCALLTYPE ShowUI(
/* [in] */ DWORD dwID,
/* [in] */ IUnknown *pActiveObject,
/* [in] */ IUnknown *pCommandTarget,
/...error in report only when run as a subreport
I have two reports that are identical except for the underlying query. the
reports show mvoement information but each report shows a different direction.
I put each of these directional reports in a third report to display the
directions side by side. When run individually the directional reports
execute fine. When run as subreports I get divide by zero errors in a
section footer of the subreports. The error does not occur when run as a
Any help would be appreciated. Thank you in advance for any help.
Message posted via http://www.accessmonster.com
...Public Folders Error Message
In Public Folders getting an error message with some (not all) contacts and
calendar items when you try to open them even with admin right or ownership
right. The message says "Can't open this item" unkown error. Any thoughts
wrote in news:165B0C43-FC8B-4EDB-938F-7CE0B97F7FC8
> In Public Folders getting an error message with some (not all)
> contacts and calendar items when you try to open them even
> right or ownership right. The message says "...Error 0x800ccc19
I am not able to send or receive email in Outlook 2000.
The error message I get says a "timeout occurred while
communicating with the server" This was not a problem
previously, but it just started happening. Can anyone
please help me resolve this? I do use McAfee for a virus
scanner, and I dont know if that is what is preventing me
from getting my emails.
Turn off the message scanning and increase your server timeout on the
Advanced tab of your Mail Account Properties.
Milly Staples [MVP - Outlook]
Post all replies to the group to keep the discussion intact....Hq sync errors WS101
I installed a new hq installation on the first store and it synced fine, but
when I sync the second store I get a error on processing the Work sheet 101:
<<CstateMachine::ExecuteState>> Error -2147024770:Automation error The
Specified module could not be found (unhandled error, State = 9
They are running Nitrosell and New West Tech Mobile Suite add-ins which
could be causing the sync errors. Any Ideas?
I have a problem in GP 10 SP4 and SQL2005. During the inventory reconcile
getting error message box : FB : Couldn't close table
What could be the wrong?
Is this occuring to all workstations with GP10 SP4? Additional
troubleshooting steps are running Checklinks on Inventory Series and
executing grant.sql for the company database.
Let us know how you go!
Dennis Araullo, MACS
Microsoft Certified Technology Specialist GP,CRM,AX
MCITP Installation and Configuration AX 2009
MCITP Database Administrator SQL 2008
Citrix Certified Ent...Random errors with attachments
We have three users who are getting random errors with
attachments. All three are using Outlook 2002 with
Windows 2000. The error occurs when adding attachments to
a new e-mail as well as opening attachments that they
receive. The error they get is "Can't create file: <file
name>. Right-click the folder you want to create the file
in, and then click Properties on the shortcut menu to
check your permissions for the folder." We've tried
everything we can think of to resolve this issue
(reinstall Office, reinstall Outlook, recreate the user's
profile on ...If column contains a value
I am trying to apply some error trapping to my code now.
I want to say that if a value (e.g. "Test") does not appear in Column A then
carry on, otherwise if it does appear in Column A (on any row) then an error
message pops up.
Can this be done, and how?
Dim HowMany as long
howmany = application.countif(.range("a:a"),"test")
if howmany > 0 then
'it's there at least once
'it's not there
You may want:
howmany = applic...Error in Recipient Update Service
Every time I try and update the Recipient Update Service, I get this error:
An operations error occurred.
Facility: LDAP Provider
ID no: 80072020
Exchange System Manager
...SBS 2003 in Journal Wrap Error State from Previous Migration
I apologize ahead of time if this question was already discussed, I realize
it is an older topic, but I couldn't find my particular "offshoot" of the
issue so decided to post a question.
Here is the history of the problem. I have an SBS 2003 Standard domain.
Two years ago, I moved SBS 2003 to more powerful hardware by way of
Microsoft's migration procedure. All went well except for the following:
When I removed the old SBS from the network, I began getting errors in my
file replication log on the new server complaining that it had a journal wrap
error (ev...Global variable error :error LNK2001
I have defined a global variable in CTestApp like :
class CTestApp : public CWinApp
static DWORD dwPos2;
When I recompile the project, it always turn out the error like the
Test error LNK2001: unresolved external symbol symbol "public: static
unsigned long CTestApp::dwPos2" (?dwPos2@CTestApp@@2KA)
Could anybody tell me why? Any helpful ideas would be highly
Well, could you tell me how to define a variale in MFC project,so and I...Runtime Error
Every time I open Outlook, a little window opens which
says 'Runtime Error has occurred - do you want to debug -
What does this mean and how do I fix it?
...Error Code 0x80246007
i tryed downloading windows updates and it fails and sayes i have Error
Code:0x80246007 is thair a way around this?
i have a compaq Evo N1000v with windows xp pro
Are you try to install Windows XP Service Pack 3 from Windows Update ?
> i tryed downloading windows updates and it fails and sayes i have Error
> Code:0x80246007 is thair a way around this?
> i have a compaq Evo N1000v with windows xp pro
A BITS transfer error occurred, but the exact error could not be retrieved.
Are you runn...Outlook 2003 error.....
this operation has been cancelled due to restrictions on
this computer. This error occurs when I double click on a
hyper link embedded in an email. Prior to the service pack
for office 2003 I did not have any problems. I do have the
latest service pack for Office 2003 and all other software
is currently up to date. This error started after I
installed the latest service pack for office 2003. I do run
Norton Internet Security and Systemworks 2004. I currently
do not have XP internet firewall enabled. I have tried it
with and without off and on and to no avail. I do have SBC
DSL with 2Wire gatew...Different version error using vista
I am getting the following error:
"A prodauct on your computer is on a different version than the database
version. You will not be able to use the application until this issue is
resolved. Use the GP_LoginErrors.log file in your temp directory to assist in
resolving this issue."
I tried to look for this log on the local but am unable to find it. I spoke
to a rep from Dynamics and the said it is compatible with VISTA. it installed
great but now I am getting this error.
I had the same thing. You should be able to find the log file, however.
Another approach is to go to a wor...Strange error message
I am getting a strange message when I am trying to copy a
graph that I use in a payroll document that we use. It
contains data and a graph for each employee. It worked
just fine for 80% of the document then all of a sudden I
started to get this message: "No more new fonts may be
applied in this workbook" with an OK button. I can hit
the OK button and it will eventually continue on (after
multiple clicks). But each time I copy and paste the
graph, it gives me this message.
I am using Excel 2002 on Win 2000 Pro with all the latest
updates and patches available. T...What error in my steps?
I create a diglog using vc,and add some the control edit.and now I want to
use the class CRecordset,and I do that:ClassWizard=>Add Class=>New,and write
CAbc in Name,select CRecordset in Base class,and press OK,and select a
ODBC(I have already created a ODBC),and select a table,finally I press
OK,but it always display:
Unable to open the files(abc.h,abc.cpp) for class "CAbc",
I want to know what error in my steps.thanks.
I add this sentence to the file stdafx.h:
but it display the error.How to solve?
"Lee Tow" <fbjlt@pu...Outlook Error
I am getting the following error in my outlook
"Outlook experiences a serious problem with the 'microsoft dynamics crm'
add-in.If you have seen this message multiple times, you should disable this
add-in and check to see if an update is available.Do you want to disable this
Any help will be greatly appreciated.
This can be caused by a bug in the synchronization mechanism. (The birthdate
field cannot contain a value before 1970). A hotfix is available.
See this knowledge base article:
http://support.microsoft.com/default.aspx?scid...Asynch Service Error...
I'm getting this wierd error message in the application log of my crm server:
Event Type: Error
Event Source: MSCRMAsyncService
Event Category: None
Event ID: 17415
Time: 12:01:47 PM
Host MyCrmServer: error while processing organization
Microsoft.Crm.Metadata.EntityMetadataNotFoundException: The entity with
ObjectTypeCode = 0 was not found in the MetadataCache.
at Microsoft.Crm.Metadata.DynamicMetadataCache.GetEntity(Int32 entityCode)
Microsoft.Crm....error message on Outlook Express
The following message is diplayed when I try to retrieve
my messages from Outlook Express.
Your server has unexpectedly terminated the connection.
Possible causes for this include server problems, network
problems, or a long period of inactivity.
Account: 'mail.comcast.net', Server: 'mail.comcast.net',
Protocol: POP3, Server Response: '+OK', Port: 110, Secure
(SSL): No, Error Number: 0x800CCC0F.
This newsgroup is for support of Outlook 97, 98, 2000 & 2002 from the Office
family for Windows PCs. For Outlook Express (OE) support try posting in one
these news...On Error of an On Error
How do I write an On Error of an On Error? For example, if an error
occurs when trying to open a linked table, I would like to open up the
linked table manager for the user to link the tables properly.
However, if that is not installed, I would like to give the user a
error message that I will write. At the moment, my code which errs
out is as follows:
Private Sub Form_Current()
' Checks to see if all table is there
On Error GoTo TableMgr
If (DCount("*", "qReport") > 0) Then
MsgBox "This should not be 0.", vbOKOnly,...Import Customizations Error
I tried to import Customizations but I got an error as following: "This
attribute map is invalid. The selected attributes should be of the same type.
The length of the source attribute and the formats should match. The targe
attribute should not be used in another mapping". Therefore, my import
wasn't get through.
Anyone has any ideas, please let me know and I'd appreciate it.
That error indicates a relationship map you are creating in your import file
is not valid for one of several reasons:
1. You are trying to map a field of one type to a differe...Error 0x800ccc0d
I know there have been many posts about this error but I cannot find any
that solve my problem. Been looking for hours now and I am getting most
I am running Office Mail as a mail server on a Win98se PC. I use Outlook 98
to send/collect mail from a client PC (also running Win98se). I can send and
collect mail without any problem at all - until I have to reboot that client
PC (for whatever reason). I then get the following error:
The server could not be found. (Account 'account name', POP3 Server:
'Servername', Error number: 0x800ccc0d).
I can browse each PC witho...