micr configurable stubs
Has anyone had to configure checks for GP using configurable stubs for
MICR? Are there any tricks to making the process easier or an
alternative program to use. Th eprocess so far is painfull as only one
item can be selected at a time and each time I add an item it starts
in upper left hand corner above other items.
Thanks in advance for any insight
Are you using Mekorma? I've used it to configure checks and found it
relatively easy to use.
MCP-GP, MCT, MVP
East Coast Dynamics
get your GPtip42today at www.gp2t...CRM 4.0 Outlook Client Install/Configuration
I cannot get the Outlook client to configure for any users. The
intranet address and internet address are not found. Connectivity has
been verified between workstations and crm server. Web clients work
ok - thoush some functionality related to custom entities is not
behaving properly (lookups not functioning, etc.)
Addtionally, CRM is not sending or tracking emails at all.
The CRM setup is as follows:
Upgraded from 3.0
Win 2K3 Server (fully updated) with SQL 2005 SP2, Reporting Services
Exchange 2003 Server (fully updated) - Email router will not
Any suggestions would b...Configuration
I just installed Office 7 Home and Student and every time I open Word it
says that it has to Configure the program. It doesn't do that with the other
programs and it is getting tiresome because it takes a few minutes. Has
anyone else had this problem or have some suggestions? Thanks!
I just started a 3 week trip and need to run Money to track spending while
However, when I start Money, it is trying to install something, and wants
the Money CD, which is back at home. Yes, I know I should have tried this
before I left, but the laptop with Money hasn't changed - its just out of
its docking station.
I thought I'd ask on the small chance that someone might have a clue on
what might cause this and/or how to get around it. I can't think of any
reason for something to be installed, but there must be something.
What file(s) is it asking for...How to create Release mode configure
i am building a project, but i removed default Release configure, and now i
try to use Debug config to copy to Release and then change something NDEBUG,
Debug info is none, uncheck Generate Debug info
any one can help me do this so that i dn't need to create new project again?
Turn on optimizations. Do NOT turn off "Generate debug info"; it was a fundamental design
error in VS to turn this off. You will need it to read crash dumps coming back from the
field. Turn off the various runtime checks. Select the libraries to be the MultiThreaded
DLL or for static lin...calculate diffence between old salary and new salary
I have to figure out the impact if a daily salary increases. How do you
calculate the difference ex: $100/day to $200/day, what is the impact on
USD 100 per day times the number of working days in the year.
If my comments have helped please hit Yes.
"Felicia Pickett" wrote:
> I have to figure out the impact if a daily salary increases. How do you
> calculate the difference ex: $100/day to $200/day, what is the impact on
> annual increase?
If A1 has the old daily salary and A2 has the new daily salary, the daily
Whwnever I start Windows, Office tries to reconfigure Publisher - how do I
What version Publisher?
You receive a "Please wait while Windows configures Microsoft Office XP Pro"
error message when you upgrade to Office 2003 or Office 2007
Mary Sauer MSFT MVP
"BG" <BG@discussions.microsoft.com> wrote in message
> Whwnever I start Windows, Office tries to reconfigure...IMAP4 configuration
I need to allow my users to retrieve their mail from my Exchange server while
they are away from the office. I have OWA working right now for web-based
email, but I am considering stopping that and only using IMAP4 because many
of my users have only dial-up access at their homes, and it takes too long
for them to connect via OWA. The main people complaining about the currect
situation are the executive director and program director, so I'd like to do
what I can to keep them happy. However, I need to know how to access the
Exchange mailboxes from outside the network. I have tried sev...How do I configure a reminder for attachment passwords?
My company sends attachments (office files) to clients via
the internet. They usually password protect these files.
Is there anyway to have outlook tell the user that the
attachment does not have a password? Sometimes they forget
to put the password on the attachment...
You would have to write code to do that. Your code would have to
intercept the AttachmentAdd event for an open item, check the original
item that is being attached by opening it from the file system as a
file of the specified type, for example Word doc. Then it would have
to use the Word object model to chec...configuring publlic folder appointment items
Is it possible to configure a public folder that contains appointment
items so that entries cannot overlap?
i.e. I want to use a public folder for the booking out of a meeting
room and if I tick the box for "All Day Event" then I would like it so
no one can make another entry for that day - or if some one books it 9
to 11 then no one else should be able to book it for the same time
am I making sense?
No, that's one of the limitations of using a pf as a resource, can't
automatically decline, no free busy etc.
James Chong (MVP)
MCSE | M+, S+, MCTS, Security+
Has anyone used the Experlogix Configurator product on CRM? What is opinion
of it? Looking to implement it in 06 after upgrading to 3.0.
My client is in the final stages of implementing Experlogix
Configurator on CRM 1.2. They have been extremely happy with both the
product and the support. (They have been doing two integration
projects at once, and the other 3rd party vendor did not deliver on
time, and the client is NOT at all happy with them, so they know the
Experlogix is a lot cheaper than some of the other 3rd party add-ons
that do multi-currency an...Programmatically report the configuration of Windows 2008 granular audit settings
I'm trying to read how the granular audit sub-category settings in
Windows 2008 like Logon/Logoff=96Special Logon, Policy Change=96Audit
Policy Change etc. are configured on a machine & write this to a .csv
Is there a way to do this programmatically? For instance, read a
certain file or registry values for each sub-category setting? I've
read on how to use auditpol.exe & wEvtUtil.exe at the command prompt
...device configuration via PowerShell
A while ago I asked about setting some pointer device related
configuration via PowerShell (specifically the SnapToDefaultButton
My effort to allow PowerShell to assist me in doing that stalled out
at the point where I can tweak the Registry setting associated with
SnapToDefaultButton using PowerShell, but that afterwards it requires a
reboot of the workstation to get it be effective.
Setting that value via Control Panel does not require the reboot.
Now I'm wondering what Control Panel does that I'm not doing via
PowerShell. I think it must be interactin...Configure
How can I configure Microsoft Outlook and hotmail.
What version of Outlook?
please reply in group. emails directly to me will be printed and laughed at
in the breakroom
"firstname.lastname@example.org" <email@example.com> wrote in
> How can I configure Microsoft Outlook and hotmail.
...Changing TSA settings for a deduction
We corrected the TSA settings for an insurance deduction in setup and
rolled it down. When we look at the payroll cards for the employees, the
roll down did not change any settings. When I try to change the "TSA
Sheltered from" settings I get the following error.
"Activity exists for this code. The tax status cannot be changed"
In the payroll settings I also checked the edit financial fields option
based on KB866519. This article is based on ver 6 and In version 8 I can't
seem to delete the summary options.
Is it possible to make this change? If so, then how?
I have following issues in my GP 10 workflow installation:
1) I have created a single step workflow after activating PO Approval
for a TEST company. I could not able to see any workflow list on
workflow administration page. I wanted to modify my workflow step
which I saved before. But I could not able to do that. I tried with
2) I tried to create a PO and submit for approval in GP by navigating
to Transactions>Purchasing<PO Entry. No change on the PO Entry window
in GP. Actually there should a msg bar and workflow history pane. I
tried to give access rights for th...Configuration
How do I configure Outlook 2003 with PMB
"barry" <firstname.lastname@example.org> wrote in message
> How do I configure Outlook 2003 with PMB
Your question may be better answered in an Outlook newsgroup appropriate to
your problem. This newsgroup is dedicated to the Microsoft Access database
product. The Microsoft website may have misdirected you.
Arvin Meyer, MCP, MVP
...How do I configure my outlook express?
Can someone pls help me with configuring my new outloook express
mizthaing <email@example.com> wrote:
> Can someone pls help me with configuring my new outloook express
Ask in an Outlook Express newsgroup, see http://www.insideoe.com/, and speak
to the support staff of your ISP.
I am running Exchange 2007 Std w/ SP1. Is there a way to configure some
type of notification or alert to immediately tell the sender or the Exchange
admin (me) that their mail is stuck in the queue, rather than wait 1-4 hours
for a delayed message notification from Exchange?
On Mon, 10 May 2010 16:11:46 -0700, "GG" <firstname.lastname@example.org> wrote:
>I am running Exchange 2007 Std w/ SP1. Is there a way to configure some
>type of notification or alert to immediately tell the sender or the Exchange
>admin (me) that their mail is stuck in t...Corporate Configuration
Since we had Windows 2000 several years ago, we had reg-hacked a policy
setting for WSUS for our clients, which loaded the information under
Since we are on Windows XP SP2 going to SP3 we now have 4 separate settings
for WSUS which all workstations are in the same OU, so we only have one
policy applied. We have two separate locations with a test and prod WSUS
settings, which makes 4 different settings depending on location, target
group, servername, etc. Is there another place this can be set without
pushing a registry...Configuring Outlook for netscape mail
How do I configure Outlook for my Netscape mail.
Cannot find out whether it is POP3 or IMAP
Need Incoming & Outgoing mail server
Many thanks in advance.
roco10 <email@example.com> wrote:
> How do I configure Outlook for my Netscape mail.
You should be able to find this information on the Netscape mail web site.
3290 Patterson Ave. SE, MS 1B3
Grand Rapids, MI 49512-1991
Brian.Tillman is the name, smiths-aerospace.com is the domain.
I don't speak for Smiths, and Smiths doesn't speak for me.
...Outlook 2003 configuration message in Outlook 2007
I recently added Office 2007 and now I continually get this message:
Please wait while Windows configures Microsoft Office 2003.
Every e-mail sent and received prompts this message.
When I turn on my computer I get an installation message for Office 2003 and
then am asked to restart to complete the installation. Whether I restart or
not, I get the configuration message constantly. How do I solve this ... get
rid of these messages and operate smoothly in Outlook 2007?
I'm using C#/VS2005 and I'm trying to insert a different 'Postbuild event'
depending on whether I'm building for release or debug. The problem I have is
that the configuration setting is disabled, so I can currently only insert
one set of post build events.
I've Googled for an answer but drawn a blank. I already have the
'options-Projects and solutions-show advanced build configurations' ticked,
but this still doesn't enable the configuration drop down setting.
Thanks for your help.
> I'm using C#/VS2005 and I'm tryin...Configuration
I manage a Remote Desktop Server and would like to set up Outlook on the
server in a way that it autoconfigures the email server when any user logs
in. How can I do this?
Which version of Outlook? If it's Outlook 2000 or higher, your best bet is
to create a transform (using the CIW) and then install Office with the
transform. The ORK has all the details http://www.microsoft.com/office/ork.
Hope this helps.
Greg Mansius [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.
"Keith" <Keith@noemail.com> wrote in m...Configuration?
I hope someone out there can help me with this. I recently
acquired a new job. One of the first requirements were to
set up Outlook, in order to email one another. As I have
experience using Outlook, unfortunately, I do not have the
know how on how to configure it. How do I allow both of us
to access OUTLOOK under more than one name? I hope I
haven't confused anyone besides myself.
ANYONE, PLEASE HELP ME, I AM SO DESPERATE AT THIS POINT. I
WOULD LIKE TO KEEP MY NEW JOB.
THANKS IN ADVANCE,