Pivot Table Calculated field #3
I have a pivot table with columns for No's, Yes's and Grand Total. I would like to calculate the % of Yes's by
dividing the Yes's by the Grand total. Can someone give me an easy explanation of how to do that or a source? I have tried every thing I can think of and the directions I have found have not helped.... Thanks, Ann
To calculate total percent Yes, you could use the GETPIVOTDATA function
in a formula outside the pivot table. For example:
&g...validate a field based on sum of other fields
I have to assign commission to agents for each "order". I can have anywhere
from 1 agent at 100% commission to 5 agents with every possible combination
of percentages. Obviously, I need the percentage entries to only add up to
100 and I'd like to force the user to adjust the figures until they total 100.
Firstly, am I right in assuming it would be better to be assigning the
agents to the orderIDs in separate records: OrderID, Agent, Agent Percentage
(as opposed to having one record contain the OrderID, Agent1,
Agent1Percentage, Agent2, Agent2Percentage, Agent3, Agent3Pe...Locking Field position on screen.
I have created a simple form in Word 2007 with maybe 2 or 3 fields across and
3 or 4 fields down, but my problem is I would like to be able to lock the
field positions in place on the screen. When I type in a field, the field to
the left moves. I need to lock the position. Can this be done.
Most forms designers put form fields in table cells of a fixed dimension.
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
"Francis Cunningham, Jr." <FrancisCunninghamJr@discussions.microsoft.com>
wrote in m...scripto to cut/paste to next field
Here is my situation:
1) A page on IE will be open, and I will have a cursor in a field on the
page (field that has text in it)
2) I need to hit a shortcut (ctrl-shft-something) that cuts everything to
the right of the cursor, advances a field (effectively, replicates ‘tab’
action), and pastes
Anyone have some code (and instructions on what to do with the code) that
may solve the above?
"BorisS" <BorisS@discussions.microsoft.com> wrote in message news:D4B54CE9-F2A4-4195-B2E3-ABA75A49202C@microsoft.com...
> Here is my situation:
> 1...text field to date field field
I have a database that has a text field called "visit" it has been
filled with data ie., " 6/22/07 - not good, " the field may also
be blank or it may contain random text after the date. In some cases
no date at all just text. I would like to create a new field called
DateVisit that contains just the dates that were entered in the field
it has been a struggle and I have made no progress
From your description, the field might contain a date, or a date and text,
or text, or nothing.
How would you explai...When printing a contact the other field (Notes) get cut off
Operating System: Mac OS X 10.5 (Leopard)
Email Client: Exchange
Also when just viewing the contact in the address book. <br>
I have tried this on two different macbook pro's and the issue is the same. Tried a different printer also. Please help
On 3/10/10 12:47 PM, firstname.lastname@example.org wrote:
> Also when just viewing the contact in the address book. I have tried
> this on two different macbook pro's and the issue is the same. Tried
> a different printer also. Please help
Can you post a picture of what you're de...Exchange setup with externel spam service
When setting up exchange to work with an external spam filtering service how
do you set the exchange server to only receive and sent to that IP? Do you
set up a smart host or is this better handled on the firewall filtering
to/from the IP? If you use a smart host do you use the public IP of the
providor? How does it know what IP it comes from?
Also...what sort of security risk is there if you have your exchange server
behind a firewall and you forward all smtp traffic to the server without any
Thanks - Wayne
"Wayne" <Wayne@discussions.microsoft.com> wr...Form Fields In Outlook Template
I'm not a developer, just a user, but I need some help.
What I want to do is create an Outlook 2003 template, that uses form fields
(Text, drop down boxes, etc.....)
However, it looks like to properly create an Outlook template, you cannot
use Word as your editor.
But if I do not use Word as the editor, then I cannot access the Form
This cannot be a new request - but I just cannot seem to figure this out.
See my response to your other post on this issue.=20
Sue Mosher, Outlook MVP
Microsoft Outlook Programming - Jumpstart...Default fields in new fields
Using Outlook 2K
When creating a new mail folder, it does not include the Subject and
Received fields necessitating their having to be added every time. How can I
get this to revert to the default fields?
...Please give brief introduction to Layered Service Providers(LSP) in winsock2
I have no idea for LSP.
Please brief for LSP that what is it and why it is needed.
For which type of Application of internet communication can use this
means for whom this is Beneficial.
...multiple critera for one field in a query
Hi, i am trying to get a count of a certain criteria but in different
Its hard to explain, but assume i have a table which consists of...
Then in a query I am trying to have the result of:
Over 500 Over 100 Over 25 Under 25
A 1 1
B 1 1
C 0 0
D 0 1
The way i have done...required fields
Through either VBA or Modifier, is it possible to make a field that is
required in Great plains by design to not be required but be optional instead?
I doubt it. The best that I could come up with was to just have VBA fill
the required field with a "dummy" piece of information and move on.
Any other ideas?
I suppose the only other way is through Dexterity.
The field is the "Interview Range from 1 to" in the HR Interview Setup
window. I just decided to have VBA fill it with "01".
You are right, fields Required by GP cann...IV00102 Fields
These four fields are set to zero when I create a new item and assign it to a
location. However, when I look at the table descriptions zero is not a valid
value for any of them. Are these four fields currently used for anything or
are they there for future use? This currently is GP10 SP3.
Replenishment Level is the default replenishment level for POP Auto
Generator. Values are 1, 2 and 3. 1 for Order point QTy, 2 for order upto
level, 3 for vendor EoQ. If these fiel...Field by Field Comparison
I have two tables with the exact same column names. I want to do a field by
field comparison of the two tables. If one letter or number is off in any
field, I would like for the whole record to show up in my query. I can only
figure out how to show records which are equal. I would like to show records
which are not equal.
Is there a query criteria or something where I can perform this?
Do a UNION query.
Create a query that lists all the field in one table. Then open that query
in SQL view.
At the end of the SQL, delete the semicolon ";".
At the...splitting a field into two fields; one in ()
I have a Name field in my database that is LastName,FirstName(dept). I have
figured out how to split last name and first name but I don't know how to
leave out the department name that is in () after the first name. Any
Quick and Dirty way to get the field down to just LastName,Firstname
is to use the following as an expression in a query:
This should give you all of the characters to the left of the opening
parenthesis. You could then apply your method for splitting the First
and Last Names.
...Joining fields into one field dependent on value of another field
Below is a sample of data of a query which I need assistance in -
Group Fertiliser ApplicationRate
1 TSP 3
2 EFB 230
3 Kies. 3
4 EFB 230
4 Kies. 3
5 TSP 3
5 Kies. 3
7 EFB 230
7 TSP 3
7 Kies. 3
>From this, I would like to create a field such that it shows eg.
1 TSP (3)
2 EFB (230)
3 Kies. (3)
4 EFB (230), Kies(3)
I am able to put Fertiliser and ApplicationRate together ie.
Fertiliser& "(" &ApplicationRate& ")"
My problem being how to add a statement saying th...How to set color of field?
In ObjectPal I used the 'Arrive' event to set the color of a field or a
record in a child table. This allowed the color to vary from one record to
the next in a datasheet view.
In Access, the 'On Current' event only works in form view. It doesn't work
in datasheet view. The 'Format' event is only available in Report objects.
The 'Conditional' format only allows three alternatives.
How can Access vary colors from one record to the next in a datasheet, or
"WDSnews" <email@example.com> wrot...Null Field to Interupt Closing
I am using this code to check for blank fields in BeforeUpdate:
If NZ(Trim(Me!Date),vbnullstring) = vbnullstring then
Msgbox "PLEASE ENTER DATE",,"Missing date"
Cancel = True
It almost works, except the form goes ahead and closes anyway. The user
clicks the close button and the message box pops up if the field is empty,
they click OK and instead of keeping the form open and then setting focus on
the empty field, it closes the form.
How can I get it to interupt the close and keep the form open?
Thank you in advance for any...Problem with after update code in field that disables another field
I want to be able to disable the Non Member field in a record when
something is entered in the Member field. Unfortunately, the code I am
usng below disables the Non Member field in *all* records, and the
database has to be closed and reopened to get round this before data
entry can continue.
I'd be grateful if someone could show me the correction, Thanks.
Private Sub Member_AfterUpdate()
If Not IsNull([Member]) Then
Me![Non Members].Enabled = False
Me![Non Members].Enabled = True
You need to put that same code in on the OnCurrent event of the form...Microsoft does not host an escrow service?
Many software developers work as a sole proprietor; a legal structure for
business accounting and taxation. Most sole proprietors are rarely hired
as-is by corporations without going through the cadre of other pimps feeding
off the developer's skills and software the customer actually wants to buy.
Generally, the customer claims buying directly from the developer is too
risky because the developer might get hit by a bus and die and then what?
Developers can have a reasonable way to respond to this dilemma by placing
their intellectual property assets into escrow . Upon su...Field name derived from a string value returns a Run-time error 2465.
I have two labels on a form and want to populate them during the run
time of my form. The name of the labels are "1" the other is called
"2" (without the quotes of course). Field 1 runs OK but two returns a
run-time error 2465.
Of course, the real form is much bigger. A lot of fields called 1
through 31 are populated from within a loop. To simplify my question I
down sized this post to two label fields.
Any one know how to solve the problem with label "2"? Any help or hint
' This works OK
Me!.Caption = "abc"...Values in Pay To Field
How do I remove values from the Pay To list? Through syncing with my PDA, a
number of the valkues have become corrupted and I want to remove them
In microsoft.public.money, Mike McLellan wrote:
>How do I remove values from the Pay To list? Through syncing with my PDA, a
>number of the valkues have become corrupted and I want to remove them
Go to Banking->AccountTools->Categories&Payees->Payees, right-click
a Payee and select Delete the selected Payee from the drop-list.
Alternatively use the Delete button at the bottom to deleted the
selected Payee from the drop-list....ReportViewer
Using ReportViewer control v9 in .aspx page - When displaying date type
parameter field in my report nothing happens when calendar icon is clicked
(no calendar page, no error) in ie 8. FoxFire works.
Same report works fine when viewed directly on the report server in ie8.
Resolved myself. Sloppy coding on the Master page. <form> tag out of place in
"Pete Hay" wrote:
> Using ReportViewer control v9 in .aspx page - When displaying date type
> parameter field in my report nothing happens when calendar icon is clicked
> (no calen...Updating a field in a Table with a subform field
I have a form that has a subform. I would like to update the Table that is
bound to my form with the info from the subform once the use is done entering
the info on the main form. Ex. I want the stockcode field in the subform to
update in the stockcode field in the main form's table.
On Thu, 26 Nov 2009 09:33:03 -0800, linda <firstname.lastname@example.org>
>I have a form that has a subform. I would like to update the Table that is
>bound to my form with the info from the subform once the use is done entering
We were planning on making 1/3 address types required: phone, email or
address. Is there any way to do this?
One idea :
1°) You add a picklist "Contact Method" with 3 values : 'Phone', 'Email',
2°) You code an OnChange method which force the user to enter a value in the
field 'Phone' if the value of "Contact Method" is 'Phone'...
According to me, there is no other method.
> We were planning on making 1/3 address types required: p...