#### Field Service PM Edit List

```Hi there

A customer has a factory that slaughters chcikens and would like to use the
Depot Management along with Preventative management to manage the servicing
of their equipment etc.  I tried to do a demo to them using the Fabrikam
company with all the sample data, but could not get the PM Edit List to
generate when I clicked the generate button.  I then tried to set it up in
another test company using the customers data and had the same problem.  Has
anyone else had this problem or does any one have any documentation etc on a
complete setup of Field Services?

Thank you
Robin
```
 0
Robinv (41)
8/17/2008 7:10:12 PM
greatplains 29623 articles. 4 followers.

0 Replies
606 Views

Similar Articles

[PageSpeed] 51

Similar Artilces:

validate a field based on sum of other fields
I have to assign commission to agents for each "order". I can have anywhere from 1 agent at 100% commission to 5 agents with every possible combination of percentages. Obviously, I need the percentage entries to only add up to 100 and I'd like to force the user to adjust the figures until they total 100. Firstly, am I right in assuming it would be better to be assigning the agents to the orderIDs in separate records: OrderID, Agent, Agent Percentage (as opposed to having one record contain the OrderID, Agent1, Agent1Percentage, Agent2, Agent2Percentage, Agent3, Agent3Pe...

Pivot Table Calculated field #3
I have a pivot table with columns for No's, Yes's and Grand Total. I would like to calculate the % of Yes's by dividing the Yes's by the Grand total. Can someone give me an easy explanation of how to do that or a source? I have tried every thing I can think of and the directions I have found have not helped.... Thanks, Ann To calculate total percent Yes, you could use the GETPIVOTDATA function in a formula outside the pivot table. For example: =GETPIVOTDATA("Region",\$A\$5,"Valid","Yes")/GETPIVOTDATA("Region",\$A\$5) MOE wrote: &g...

Locking Field position on screen.
I have created a simple form in Word 2007 with maybe 2 or 3 fields across and 3 or 4 fields down, but my problem is I would like to be able to lock the field positions in place on the screen. When I type in a field, the field to the left moves. I need to lock the position. Can this be done. Frank Most forms designers put form fields in table cells of a fixed dimension. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "Francis Cunningham, Jr." <FrancisCunninghamJr@discussions.microsoft.com> wrote in m...

scripto to cut/paste to next field
Here is my situation: 1) A page on IE will be open, and I will have a cursor in a field on the page (field that has text in it) 2) I need to hit a shortcut (ctrl-shft-something) that cuts everything to the right of the cursor, advances a field (effectively, replicates ‘tab’ action), and pastes Anyone have some code (and instructions on what to do with the code) that may solve the above? -- Boris "BorisS" <BorisS@discussions.microsoft.com> wrote in message news:D4B54CE9-F2A4-4195-B2E3-ABA75A49202C@microsoft.com... > Here is my situation: > > 1...

Recently used file list. It is set for 9, but the list seems to be cleared
I followed the Help instructions. Tools/Options/General to set the length of the displayed list. I found that it was already set to 9 entries. However, in the File pulldown, the list is not displayed. I created a dummy test XLS, and indeed it is in the list, but nothing previously created. What might be clearing this list? Don't know if applies to Office 2007 but here's one guess........ For Office 2002 and 2003............ Are you running TweakUI? If so, you may have disabled the MRU lists by unchecking "maintain document history list" under the TweakUI Expl...

When printing a contact the other field (Notes) get cut off
Version: 2008 Operating System: Mac OS X 10.5 (Leopard) Processor: Intel Email Client: Exchange Also when just viewing the contact in the address book. <br> I have tried this on two different macbook pro's and the issue is the same. Tried a different printer also. Please help On 3/10/10 12:47 PM, mwilshrie@officeformac.com wrote: > Also when just viewing the contact in the address book. I have tried > this on two different macbook pro's and the issue is the same. Tried > a different printer also. Please help Can you post a picture of what you're de...

text field to date field field
I have a database that has a text field called "visit" it has been filled with data ie., " 6/22/07 - not good, " the field may also be blank or it may contain random text after the date. In some cases no date at all just text. I would like to create a new field called DateVisit that contains just the dates that were entered in the field "visit" it has been a struggle and I have made no progress please help abbenj@verizon.net/nospam From your description, the field might contain a date, or a date and text, or text, or nothing. How would you explai...

How do I stop an incorrect email address being listed?
I use Outlook dated 2007 which fills in potential email recipients on the basis of the name given. However, a number of these are obsolete/incorrect. How can I stop them from being listed? I have noticed that the list offered varies unpredictably (by me). Some times people appear, some times they don't. Where does the list come from? David Butland On 3/18/2010 11:56 PM, DavidButland wrote: > I use Outlook dated 2007 which fills in potential email recipients on the > basis of the name given. However, a number of these are obsolete/incorrect. > How can I stop them from...

Form Fields In Outlook Template
Help !!! I'm not a developer, just a user, but I need some help. What I want to do is create an Outlook 2003 template, that uses form fields (Text, drop down boxes, etc.....) However, it looks like to properly create an Outlook template, you cannot use Word as your editor. But if I do not use Word as the editor, then I cannot access the Form Toolbar. This cannot be a new request - but I just cannot seem to figure this out. Help !!! Thank you See my response to your other post on this issue.=20 --=20 Sue Mosher, Outlook MVP Author of Microsoft Outlook Programming - Jumpstart...

MFC applications and Visual C++'s newer editions
Hello. When it comes to Win32, Visual Studio .NET 2005 Express Edition Beta 2 only allows the creation of console-based applications. What if one wanted to create MFC-based applications and, at the same time, be able to take advantage of the powerful and conforming C++ compiler that comes with the package? I hope that resorting to Visual C++ 6.0 is not the only option. Thank you, -- Ney Andr� de Mello Zunino "Ney Andr� de Mello Zunino" <zunino@inf.ufsc.br> wrote in message news:%23FuRyAcXFHA.584@TK2MSFTNGP15.phx.gbl... > Hello. > > When it comes to Win32, Vi...

Exchange setup with externel spam service
Hi, When setting up exchange to work with an external spam filtering service how do you set the exchange server to only receive and sent to that IP? Do you set up a smart host or is this better handled on the firewall filtering to/from the IP? If you use a smart host do you use the public IP of the providor? How does it know what IP it comes from? Also...what sort of security risk is there if you have your exchange server behind a firewall and you forward all smtp traffic to the server without any filtering? Thanks - Wayne "Wayne" <Wayne@discussions.microsoft.com> wr...

Default fields in new fields
Using Outlook 2K When creating a new mail folder, it does not include the Subject and Received fields necessitating their having to be added every time. How can I get this to revert to the default fields? Thanks, Cathy ...

Please give brief introduction to Layered Service Providers(LSP) in winsock2
I have no idea for LSP. Please brief for LSP that what is it and why it is needed. For which type of Application of internet communication can use this means for whom this is Beneficial. Thanks archita ...

multiple critera for one field in a query
Hi, i am trying to get a count of a certain criteria but in different columns. Its hard to explain, but assume i have a table which consists of... A 550 B 600 C 20 A 100 C 75 B 120 D 390 Then in a query I am trying to have the result of: Over 500 Over 100 Over 25 Under 25 A 1 1 0 0 B 1 1 0 0 C 0 0 1 1 D 0 1 0 0 The way i have done...

Hello: Through either VBA or Modifier, is it possible to make a field that is required in Great plains by design to not be required but be optional instead? I doubt it. The best that I could come up with was to just have VBA fill the required field with a "dummy" piece of information and move on. Any other ideas? I suppose the only other way is through Dexterity. The field is the "Interview Range from 1 to" in the HR Interview Setup window. I just decided to have VBA fill it with "01". Thanks! childofthe1980s You are right, fields Required by GP cann...

IV00102 Fields
These four fields are set to zero when I create a new item and assign it to a location. However, when I look at the table descriptions zero is not a valid value for any of them. Are these four fields currently used for anything or are they there for future use? This currently is GP10 SP3. 1) IV00102.REPLENISHLEVEL 2) IV00102.POPVENDORSELECTION 3) IV00102.POPPRICINGSELECTION 4) IV00102.PICKTICKETITEMOPT Rich, Replenishment Level is the default replenishment level for POP Auto Generator. Values are 1, 2 and 3. 1 for Order point QTy, 2 for order upto level, 3 for vendor EoQ. If these fiel...

Blocked Senders List on SBS 2003
Using OWA when I try to add a sender to the blocked list I get a message saying folder size is to big. I've had a look in the registry but cant find anything related, any ideas please on how to increase this folder size. TIA Jon Hi Jon, There is a limit of 512Kb combined for all junk email list, you can increase this limit via the following registry modification on your server: Registry key: HKLM\System\CurrentControlSet\Services\MSExchangeIS\ParametersSystem Value: Max Extended Rule Size Type: DWORD Data: maximum size, in bytes, you want to allow for the junk e-mail rule Regards...

Mixed Language Text in a List Control
Hello Gents I have a strange request that at this time I dont know if i can support. Here is the deal. The application will have multi language support for all static items using resource only dlls. However, we are working with a device and certain name type parameters arrive to me for display. I am given the language and encoding of the string. As an example lets say we are in Chinese mode. All of the applications static data will be in chinese. Now I get a message from the device of a name that is only in english. Can I display the English string? Thanks for the help. Mike If you a...

Field by Field Comparison
I have two tables with the exact same column names. I want to do a field by field comparison of the two tables. If one letter or number is off in any field, I would like for the whole record to show up in my query. I can only figure out how to show records which are equal. I would like to show records which are not equal. Is there a query criteria or something where I can perform this? Thanks. Do a UNION query. Create a query that lists all the field in one table. Then open that query in SQL view. At the end of the SQL, delete the semicolon ";". At the...

splitting a field into two fields; one in ()
I have a Name field in my database that is LastName,FirstName(dept). I have figured out how to split last name and first name but I don't know how to leave out the department name that is in () after the first name. Any suggestions? Quick and Dirty way to get the field down to just LastName,Firstname is to use the following as an expression in a query: LastFirst:Left([Name],Instr([Name],"(")-1) This should give you all of the characters to the left of the opening parenthesis. You could then apply your method for splitting the First and Last Names. HTH ...

getting list of aliases on Exchange 2007
Hey! One (i think) simple question - how do I get a list of alle the email aliases on and exchange box? - FYI I have the all-in-one-box solution with exchange I can do the get-user cmdlet and get a list of users (by the way - why can't I use the get-mailuser??? It doesn't return ANYTHING - it just goes "plop" and returns to the prompt - why??) But how do a get a list of aliases for a peticular user? I figured that I could do the "pipe" thing between to to functions... Any thoughts?? I need the list (that is going to be loaded into a database) for a custom webpa...

Joining fields into one field dependent on value of another field
Hi, Below is a sample of data of a query which I need assistance in - Group Fertiliser ApplicationRate 1 TSP 3 2 EFB 230 3 Kies. 3 4 EFB 230 4 Kies. 3 5 TSP 3 5 Kies. 3 7 EFB 230 7 TSP 3 7 Kies. 3 >From this, I would like to create a field such that it shows eg. Group FertiliserDescription 1 TSP (3) 2 EFB (230) 3 Kies. (3) 4 EFB (230), Kies(3) 7 EFB(230),TSP(3),Kies(3) I am able to put Fertiliser and ApplicationRate together ie. Fertiliser& "(" &ApplicationRate& ")" My problem being how to add a statement saying th...

How to set color of field?
In ObjectPal I used the 'Arrive' event to set the color of a field or a record in a child table. This allowed the color to vary from one record to the next in a datasheet view. In Access, the 'On Current' event only works in form view. It doesn't work in datasheet view. The 'Format' event is only available in Report objects. The 'Conditional' format only allows three alternatives. How can Access vary colors from one record to the next in a datasheet, or datasheet-like view? "WDSnews" <wdsnews.0640@oregoncity.com> wrot...

Null Field to Interupt Closing
I am using this code to check for blank fields in BeforeUpdate: If NZ(Trim(Me!Date),vbnullstring) = vbnullstring then Msgbox "PLEASE ENTER DATE",,"Missing date" Me!Date.setfocus Cancel = True Exit Sub End if It almost works, except the form goes ahead and closes anyway. The user clicks the close button and the message box pops up if the field is empty, they click OK and instead of keeping the form open and then setting focus on the empty field, it closes the form. How can I get it to interupt the close and keep the form open? Thank you in advance for any...

list on new sheet
CAN SOMEONE HELP HERE IS MY DATA A B C D Name CofC Date FDA OTMR B------ PHIL 17-Aug-06 17-Feb-06 17-Aug-06 COMPLETED 10-Jan-06 15-Jan-06 B------- BOB 30-Aug-06 28-Feb-06 30-Aug-06 COMPLETED B----- Steve 05-Mar-06 05-Sep-06 05-Mar-06 COMPLETED B----- Dave 14-Dec-06 14-Jun-06 14-Dec-06 COMPLETED B----------- Wayne 10-Mar-06 10-Sep-06 10-Mar-06 COMPLETED and so on column c and d are activities the person has to complete and the date under this is the latest it has to be completed, along the complete...