SSL for IMAP and SMTP

We run Exchange 2003 and want to be able to encrypt messages while people are 
on the road. I have read the KB 319278 (IMAP) and KB 823019 (SMTP) on how to 
do this. My question is do I need to different virtual servers for both 
(internal messaging we don't need SSL) and External (SSL needed)? I don't 
want to go ahead and encrypt the current virtual servers and have a ton a 
people calling saying they need to reconfigured their mail clients. Only 
those who we need to encypt on the road would we set up for secure 
encryption. Am I going about this in the right way?
Thanks in advance....
0
PDSI (1)
6/28/2006 11:33:02 PM
exchange.admin 57650 articles. 2 followers. Follow

1 Replies
280 Views

Similar Articles

[PageSpeed] 54

If you have a FE server you could configure SSL without affecting your 
internal users.

Nue
"PDSI" <PDSI@discussions.microsoft.com> wrote in message 
news:0E9BECC1-8741-4862-82B0-37009098AFB0@microsoft.com...
> We run Exchange 2003 and want to be able to encrypt messages while people 
> are
> on the road. I have read the KB 319278 (IMAP) and KB 823019 (SMTP) on how 
> to
> do this. My question is do I need to different virtual servers for both
> (internal messaging we don't need SSL) and External (SSL needed)? I don't
> want to go ahead and encrypt the current virtual servers and have a ton a
> people calling saying they need to reconfigured their mail clients. Only
> those who we need to encypt on the road would we set up for secure
> encryption. Am I going about this in the right way?
> Thanks in advance.... 


0
imaneophyte (3005)
6/28/2006 11:39:04 PM
Reply:

Similar Artilces:

smtp 500 5.3.3
Hello! Has Anyone seen this error message before, I get thit when I try to email to certain domains, to some it?s working but not to all: A critical function required for the transfer or delivery of the message was not supported by the originator of the report <x.domain.se #5.3.3 smtp;500 5.3.3 Unrecognized command> 5.3.3's typically indicate that the receiving mail server is having disk space issues.... "johan almqvist via WinServerKB.com" <forum@nospam.WinServerKB.com> wrote in message news:a608dbfd763343ad95fac61ea29584a7@WinServerKB.com... > Hello! > &...

Renew SSL
Hi, Exchange 2007 on Win2003. The SSL cert is due to expire soon. Is there a recommended renewal procedure, or is it simply creating and installing a new SSL cert before it expires? Any assistance is appreciated. ED. That is pretty much it, you can renew your current certificate with your SSL provider and you should get the new certificate back within 30 min. If you plan on using another CA provider, then it might take a bit longer to authenticate your domain and company. -- John Oliver, Jr MCSE, MCT, CCNA Exchange MVP 2010 Microsoft Certified Partner &quo...

Exchange 5.5 SSl SMTP
How to enable SSL on SMTP Protocol on Exchange 5.5 on NT4/ Step by step please. It is very important for me . Best regards for all of You These links will provide some ideas http://www.windowsitpro.com/MicrosoftExchangeOutlook/Article/ArticleID/4869/4869.html http://support.microsoft.com/kb/q175439/ "Pawel" wrote: > How to enable SSL on SMTP Protocol on Exchange 5.5 on NT4/ Step by step > please. It is very important for me . > Best regards for all of You > > > ...

how to check if SSL or SASL is enabled at customer side or not ?
Hi All, While connecting to AD via JNDI, I am getting a error like: javax.naming.AuthenticationNotSupportedException: [LDAP: error code 8 - 00002028: LdapErr: DSID-0C0901FC, comment: The server requires binds to turn on integrity checking if SSL\TLS are not already active on the connection, data 0, v1771] From googling what I came across is, this will be thrown when a particular flavor of authentication requested is not supported. It may be specified using specific authentication schemes such those identified using SASL. And I also got a hint that, the solution would be to use e...

POP3/IMAP co-existence problem
I've been using IMAP with Exchange 2000 server for some time, recently I started POP3 virtual server for testing purpose. Its ok to send out mails, but when replying to the sending account, error occured: The following recipient(s) could not be reached: <user> on <date> <time> A configuration error in the e-mail system caused the message to bounce between two servers or to be forwarded between two recipients I configured nothing except starting the POP3 virtual server. Can anyone help? Thanks Vincent "Vincent" <Vincent@discussions...

SSL
Why can't I send using SSL? I can receive messages but can't send. I've asked everyone I know for help, but everyone has a different idea. I've tried everything I can think of. Is there an Outlook glitch I don't know about? Are you trying to use SSL on a non-standard SMTP port? (e.g. Non-standard SMTP port means that the account is configured to try and send e-mail on a port that does not equal 25 or 465.) "Garth" <anonymous@discussions.microsoft.com> wrote in message news:02af01c4f236$60d95c70$a601280a@phx.gbl... > Why can't I send usin...

SMTP communication problem...
Here is the error: There was a SMTP communication problem with the recipient's email server. Please contact your system administrator. <postus.tower.as #5.5.0 smtp;550 Invalid domain asila.org> Here is the history: We house an internal Exchange 2000 server. Most users uses the server to send out emails. Our ISP houses our asila.org email address. Our Outlook has a POP3 account that is set up to grab the asila.org internet emails. We created several email contacts in the Active Directory and put them into a few distribution lists. For some people, emails sent to...

Sending Mail using SMTP via Exchange Server
We have recently installed Windows Small Business Server in our company and we are beginning to investigate using Microsoft Exchange. We have set up a couple of test accounts and we can receive mail fine by using the POP3 connector in Exchange Server Management but we have been unable to send any mail at all. I have written several test email to send in the test accounts and after spending a few seconds in the outbox they appear in the sent items folder but are never actually received. This morning I received a Delivery Status Notification for each of the sent emails saying that deliver...

SSL for IMAP and SMTP
We run Exchange 2003 and want to be able to encrypt messages while people are on the road. I have read the KB 319278 (IMAP) and KB 823019 (SMTP) on how to do this. My question is do I need to different virtual servers for both (internal messaging we don't need SSL) and External (SSL needed)? I don't want to go ahead and encrypt the current virtual servers and have a ton a people calling saying they need to reconfigured their mail clients. Only those who we need to encypt on the road would we set up for secure encryption. Am I going about this in the right way? Thanks in advance....

SMTP Connector
Error Message received by NDR - This message was rejected due to the current administrative policy by the destination server Can anyone shed some light on this one? This only happens with random external domains. Cheers On Wed, 23 Aug 2006 18:07:02 -0700, Help <Help@discussions.microsoft.com> wrote: >Error Message received by NDR - This message was rejected due to the current >administrative policy by the destination server > >Can anyone shed some light on this one? This only happens with random >external domains. > >Cheers Sounds like they are blocking you...

Telnet IMAP
Hi, i'm new here and have a problem telneting into IMAP. i can connect to my server but can't login. can someone walk me through how to login? thanks http://support.microsoft.com/default.aspx?scid=kb;en-us;189326 -- Bharat Suneja MCSE, MCT www.zenprise.com blog: www.suneja.com/blog ----------------------------------------- "jwise95" <jwise@columbia.k12.pa.us> wrote in message news:1135278668.299217.254940@g47g2000cwa.googlegroups.com... > Hi, i'm new here and have a problem telneting into IMAP. i can connect > to my server but can't login. can som...

Configure your firewall to forward SMTP messages to the new server
When retiring an old exchanger server, after moving the FSMO roles and rehoming the public folders and offline address book, is it necessary to set the new server as the default SMPT server prior to changing the firewall or will it automatically accept the messages? There are 2 things that typically happen on most firewalls: 1. A static network address translation (NAT) that maps the server's internal/private IP address to an external/public IP address 2. ACL/rule that allows traffic on a particular port - tcp port 25 in this case for smtp - to that server. You can either change the...

IMAP for Hotmail? & Configure Hotmail Connector?
1. Does Hotmail offer IMAP message synchronisation? I don't use or need the extra features that Hotmail(Outlook) Connector offers ie. sync Calendar, Contacts etc. I have problems when using outlook with a slow (poor wireless) internet connection. I expect there must be a lot of complicated overhead in the 'Hotmail Connector' - MAPI protocol. If it doesn't offer IMAP sync, then... 2. Can Hotmail Connector be configured to sync e-mail ONLY, and not calendar, contacts etc.? "Mike" <Mike@discussions.microsoft.com> wrote in message news:0...

Help, Transferring XML data under SSL
I need some advice on how to securely transfer data between two servers. Here is the situation. We have two sql servers that hold student data. I have full access to my sql server, but only write access to the main sql server on campus. I hope to use XML and SSL to transfer student data to the main server. As for generating the XML, I'll have an asp.net page set up in a secure directory that will generate the data in xml format. The data people will access this page and get the xml file with all the data. What's the best way to turn a sql server table into XML format? W...

IMAP profile pst file too large
I have a user whose IMAP profile .pst file has hit 2Gig.... and nothing works. Is there a safe procedure to deal with this problem? What the heck does Outlook need 2Gig of local pst storage for anyway? I know he has a lot of mail on the IMAP server, but that is where it belongs, not in some pst file on his laptop. He's running Outlook 2003 SP3 under Win2K. Sakshale FYI I used c:\Program Files\Common Files\System\MSMAPI\1033\SCANPST.EXE to verify the file's health. 1 - I couldn't simply open it as the USERNAME\Local Settings folder is hidden. I simply copied...

Configuring SSL and Exchange SSL
This is a series questions and answers, I need help configuring SSL? >-----Original Message----- >Client has this. This was kept in a .PWL file in older versions of >Windows - not sure about the current versions. > >You can enable Forms Based Authentication to prevent this if you have >Exchange 2003 and SSL. > >-- >Hope that helps, >Dan Townsend > >This posting is provided "AS IS" with no warranties, and confers no rights. >Please do not send email to this address, post a reply to this newsgroup. > >Use of included script samples...

IMAP & Segmented Messages
Greetings, When a broken apart message is retrieved in a POP account it is combined on the fly. This does not happen in an IMAP folder. How does one combine such a message? Thanks in advance for the help -- KGNSheppard KGNSheppard <KGNSheppard@discussions.microsoft.com> wrote: > When a broken apart message is retrieved in a POP account it is > combined on the fly. As far as I know, Outlook doesn't do this. I've never seen it automatically combine multipart messages. -- Brian Tillman "Brian Tillman" wrote: > KGNSheppard <KGNSheppard@discussion...

Simple question about OWA with SSL and two Exchange 2003 servers
I have installed a couple of Exchange 2003 servers on a test-domain and created a few mailboxes on each. OWA is configured with SSL and the firewall is configured to route 443 to one of the servers. OWA works perfect for all users with mailbox on this server, but for users with mailboxes on the other server, I only get an error (Page can not be found)... I�v installed the CA on both servers and generated one certificat for each server (is this correct?) Both servers are 2003 domain controllers I have tried to make on of the servers a "front end server" (the one that the fire...

POP3-SSL / IMAP-SSL front end config
Hi, Could someone tell me what ports you need open on the inside firewall (between frontend/backend exchange 2003 servers) for POP3-SSL and IMAP-SSL to work? All i have atm is 995 and 993, this does not seem to be working properly. The firewall is not managed by myself and is really locked down, that said, we have it setup so OWA is working, so the required ports there are already allowed. Matthew From the E2K3 FE/BE Topology Guide you can download from Microsoft: HTTP, POP, and IMAP communication between the front-end server and any server with which the front-end server communic...

SSL not working with OWA
All, I've just installed a new certificate on my ex2k3 server - which is reporting that it's all fine and working. OWA IS working via HTTP but not via HTTPS (I've checked internally as well). Have restarted the WWW Services and IIS. Anywhere else I can look? Very odd. Thanks, M Check this link: http://www.msexchange.org/tutorials/Securing-Exchange-Server-2003-Outlook-Web-Access-Chapter5.html This is a usefull article -- Gustavo Del Grosso Laboratorios Andrómaco Gerencia de Tecnología gustavodelgrosso@hotmail.com "Mike K" wrote: > All, > I&#...

IMAP Account
My IT department has been trying to help me set up an IMAP account so I can access my mail from home. So far, nothing has worked. We run a LINUX server and the administrator claims that IMAP works fine when using Nestscape products but not Microsoft. He claims that Outlook does not implement SSL correctly. Does anyone know of any issues setting up an IMAP account to access mail from a LINUX server? ...

SMTP using SSL with authentication
Help! Setup POP3/SMTP connectivity on this FE 2003 server, plus only allowing authentication and SSL for these users. Tried to setup a test user using Outlook Express, and the test user was able to sucessfully recieve and send emails. Setup a second user, with same privileges, and this user is able to recieve (POP3) emails, but not able to send emails?! Get a 454 error, but this user should be able to send if authenticated, just as well as the first test user... !? What could cause this kind of problem? TIA!! / Per Check: Client submission SMTP VS in ESM: 1. Basic with TLS/SSL e...

Multiple Email Accounts (Exchange, POP3, and IMAP)
When I jsut have my exchange account setup, everything works fine. But when I add either of my other two accounts, the only thing I can do is receive emails. Everytime I respond to an email, it just sits in my Outbox. I have tried selecting an account to use, not selecting an account to use, multiple variations of the send/receiving groups, but nothing works. What version of Outlook do you have? From your description below, it sounds like Outlook 2002. If so, could you turn on diagnostic logging (see http://support.microsoft.com/default.aspx?scid=kb;en-us;Q300479) and post the OPML...

SSL for CRM
Hi All, Can I use SSL for my crm site ? What considerations do I need to think about for this? Thanks Mike I've tried to set up CRM directly with SSL. But didn't go with that because I was having problems. Didn't find out the true root cause. I'm using CRM with ISA. SSL bridging: Internet <-HTTPS-> ISA <- HTTP -> CRM Install your cert at ISA. Setup ISA for SSL bridging. And if we're not using ISA? crmrunner wrote: > I've tried to set up CRM directly with SSL. But didn't go with that > because I was having problems. Didn't find...

SMTP behind PIX MailGuard
Hi, I want to use SMTP with authentication through a PIX firewall with enabled MailGuard feature (esmtp-commands are filtered). Is it possible to run the smtp-server on a second port? I hope, the MailGuard feature just run on port 25. thanks KLAUS In the last exciting episode, "Klaus" <anonymous@discussions.microsoft.com> wrote: >Hi, > >I want to use SMTP with authentication through a PIX >firewall with enabled MailGuard feature (esmtp-commands >are filtered). Is it possible to run the smtp-server on a >second port? I hope, the MailGuard feature jus...