Exchange E-Mail Router Setup Issue
I am following the Chapter 14 Implementation Guide and
when I attempt to install the Exchange E-Mail Router I get
an error after the Add Server dialog that says the server
is invalid or you do not have admin privileges on that
server. I installed the CRM as domain admin and am
installing the Router as domain admin. The server is
valid. Ideas about how I could break this problem down
would be greatly appreciated.
When you get prompted for the account details you have to enter them as
domain\useraccount not just useraccount (even if you are logged into the
This worked for me.
...Excel Not Opening using OWA
We have an excel file from a certain sorce that will open blank or if trying
to save will save as 0kb from OWA, file opens fine using normal Outlook 2003
Any clues - help much appreciated
"Ivo" <Ivo@discussions.microsoft.com> wrote in message
> We have an excel file from a certain sorce that will open blank or if
> to save will save as 0kb from OWA, file opens fine using normal Outlook
> Any clues - help...OWA 2003 An Unknown Error Happened
When I attempt to create, reply or forward to a message in OWA 2003, the appropriate
window opens, but is blue/grey in color, and contains only this text, centered in the
! An unknown error happened.
The exclamation point is dark red, the text is black.
I've dumped the client browser cache, removed all unnecessary controls in
"C:\WINDOWS\Downloaded Program Files", and rebooted the system. I've cleared the SSL
state. I've reset the browser advanced settings.
The problem persists. Any suggestions?
(substitute 'tcsys.com&...Additional domain smtp primary address -problems with owa & active
We are going to be adding a second smtp domain to our exchange enviroment,
are users will be split one half having abc.com as their primary (reply to
address) and the
other half having xyz.com as their primary (reply to address). Given that
enviroment is originally installed under abc.com, will there be any issues
with the users' whose primary smtp address is xyz.com accessing owa and using
active sync? I have read someone that exchange has problems matching primary
smtp addresses that don't match the exchange virtual directory default when
owa or active sync?...Problems with OWA after Installing SP1
We recently installed Hotfix KB31464 and Service Pack 1 for our Exchange
Server 2003. However, after that, we're having problems with our Outlook Web
Access system. From IE, the page says it is 'loading' but it never does
anything else. Clicking upon the different links (contacts, calendar, etc)
does nothing. If you open the page in Firefox, it links to the right folders
(contacts, calendar) and opens them up (like emails, events, contacts), but
the images aren't showing up (showing up as broken links). Is anyone else
having this problem or know how to rememdy this?
I to...Account Register Payee/Memo Issues
My bank lists my transactions as either a withdrawal, deposit or
transfer. Then there is a subcategory that lists the details of that
transaction, if any. The problem I am having is that MSM downloads the
data from my bank, and when I open the account register all I see is a
page full of withdrawals and deposits. If I go to the advanced register
I can see the detailed info MSM has downloaded and put into the memo
field, but the issue that I am having is that MSM will not categorize
using the memo field, nor can I find a way for MSM to automatically
fill in the transaction field from the memo d...re: slow OWA
I'm having problems with an exchange 2003 server standard edition
running webmail and only webmail. This is the only server and is the domain
controller aswell running windows 2003 server. I am using Forms based auth
and things will all work fine and then all of sudden someone can click on
their inbox and everything will grind to a halt. Things become very slow and
it is unusable. The CPU, Disk and Mem usage are all fairly normal and i
cannot see anything that sticks out to me. The people are accessing it from
other sites only when this is happening internally it seems to work fine...Issue writing IF OR Error Formula Types
Having trouble putting a formala together.
I have the following formula which works:
Senario : $d$d = either weight or unit or unknown (of an ingredient)
e8= is a quantity number ( either in grams or units, o
an ingredient. eg 100 or 1)
Raw data is in nutrition!$b$6:$g$70
The following formula works so far:
f8 ( which is the no. o
But I also want to add to it that
If e8(quantity)=0 or blank or invalid then "qty?" should appear in th
And not sure what to do to avoid an error in f8...OWA URL and OWA authentication
I'm trying to change my owa url. Actually is https://mydomain.com/exchang
but I dont want users have to type the /exchange. I went to IIS into default
web site properties into home directory tab, and than check redirection to a
URL and than type /exchange, but may I forgot something because it doesn't
The other question is : I would like that the user have to type their e-mail
address and password to get into the owa. At this time, they have to type
their user domain name and pwd.
For the redirection to work, you'll also need to check the box marked "A...OWA: Best course of action when OWA is generally defunct?
I have an Exchange 2003 server that was running beautifully until we
found we had a problem managing public folders from Exchange System
Manager, requiring a new SSL certificate to be generated. We were able
to fix the System Manager problem, but then we found that OWA was
broken. We get the dreaded "Page cannot be displayed" error when
trying to go in on port 443, and attempts to go in through 80 results
in a 404.3 error (must be viewed over SSL).
Generally speaking, the Exchange server seems to be in good health - -
it's only the Web-based parts of the system that seem hose...OWA premium 2003 prompts for office CD?
This is a multi-part message in MIME format.
I have seen on a few machines that while using the Premium version the =
computer will bring up prompts to insert the office CD to install =
something. But what confuses me is that I've tried OWA2003 on a machine =
without office and it works fine, so it appears to not require MS office =
unless you have office installed and then it prompts the user multiple =
times to insert the office CD.
Can any...Why does OWA...
When I bring up OWA, it asks me for my authentication twice in a row. The
first one appears to be just logging onto the server and the second one
seems to be logging into Exchange. I really don't know exactly.
The first authentication box says "Site: mydomain.com"
The second authentication box says "Site: server.mydomain.com"
Is this normal?
...Exchange 2003 OMA issue
Ever since we installed device update 4 on our exchange server we have
not been able to access mail through http://server/oma. Before we
installed the update it worked fine.
We now just get this on the screen when we try:
Anything in the event log?
Windows Server MVP
"Peter Barrett" <email@example.com> wrote in message
> Ever since we installed device update 4 on our exchange serve...OWA requires second authentication if mailbox is not on OWA server
I have 2 exchange 2000/W2K boxes, and 1 exchange 2003/W2K3 box in my
enterprise. I have just added a second exchange 2003 SP2/W2K3 box
which will replace one of my exchange 2000 boxes. All 3 servers are
back end servers and house mailbox stores.
The box I am replacing is also the OWA server. When I use my new
server to open a mailbox through OWA that is in the mailbox store on
the same (new E2K3SP2) server I log in without any issues.
If, however, the mailbox resides in the mail store on my previously
existing Exchange 2003 mail server, I am prompted to enter my login
credentials twice. ...OWA setup #4
I have a front end server on the inside network on the same subnet as my
backend server. Do I need to do anything special to have the front
communicate with the backend server..other then check the front end server
box. I did all of the basics already. I am going to deploy an isa server in
our dmz but for now I need to make this work. I can get the front ot work but
it won;t work using premium mode on the logon screen but it will work using
the backend server as the owa server even though I am attemping to login to
it from the same server(front end)
There shouldn't be anything spec...Issue a credit for a item
Hi anyone can help me here?
I want to issue a credit to adjust the price on an item on an invoice, and I
want the adjustment is to the item then later it will show the real margin on
the item. Are there any way the GP can do it?
I'm guessing the invoice is already posted or you could simply adjust the
unit price. Otherwise, the credit memos apply to the total invoice amount
and not to any one line item. Sorry
Visit our booth at Convergence in Orlando this year. And join us for a blast
of a party aboard an ocean going cruise ship. Get more information at
I have a cell, that contains a reference to a document - i.e
C:\documents\test.doc - is there anyway that I can automatically convert
either by way of text recognition (ie the program recognises that is an
internal URL) or by way of cell reference (ie that whatever is in that cell
is an internal URL), so that when I type C:\ etc - it automatically creates
an internal hyperlink.
My email address is - myname at cdtoday.co.uk
(This email has been checked
by Norton Antivirus 2004)
Personally, I think I'd use a helper column with a bunch of formulas that refer
to th...Is this an Oulook issue, or Word issue?
I use Outlook at work, with "use Word as editor" (all Office 2000 in Win
Normally, using Word, I do not use Track Changes: nothing is highlighted
on the screen or in print. However, I right-click a document to "Send to
Recipient", when I use Insert>AutoText>Email Signature, the Signature is
inserted with change markings: color, underlined, and a vertical bar in the
margin. I have to manually go back up and deselect all the Track Changes
options that got turned back on.
Can I fix this either in Word or in Outlook? Or do I just live with it...Probably a hardware issue, but...
....it only seems to happen while using Outlook 2003.
Basically it has to do with mouse/pointer losing the focus. For example,
While a mail message is selected in any mail folder, the selected message is
"blue". But without warning or any action on my part, the focus will "go
away" and the seleceted object becomes "grey". I must them go back and click
on that object to make it active again.
This also seems to happen when I am in a dialog box of some sort. Even right
in the middle of typing, the focus on the dialog box gets lost and I cannot
continue typing ...OWA down again
We rebooted the Windows 2000 server. Now when we try to
access OWA, after the log on screen we get the error
page ""HTTP/1.1 503 Service Unavailable". IIS 5 was
restarted but we still get this error. I tried to create
another virtual HTTP server in Exchange to make another
web site but again we get the "HTTP/1.1 503 Service
Unavailable". Do you know what we can do to fix this?
...Problem with OWA
From Outlook Web Access, when I create a new meeting and I choose a
ressource, the ressource don't tell me that the reservation is ok.
Moreover, the ressource don't put her status to "occupied".
But, if I create the same meeting from Outlook, I don't have this problem.
I will be notified and the ressource will be occupied.
Is it a bug or how can I fixe the problem?
Thanks in advance!
Post to an Exchange group as OWA is a part of Exchange, not Outlook.
microsoft.public.exchange.clients would be a good place to start.
Milly Staples [MVP - Outlook]
Post al...OWA not displaying mailboxes
Hi .I setup a new windows 3K server, move AD on it and install exchange 2003
with SP2, test it and seems to me that everything was working. Then delete
exchange from the old domain controller and removed AD but now when I run OWA
no mailboxes appear. I just have some little boxes for the pictures and
Loading... on the second frame.
Any help is welcome. I already tried to reinstall exchange and reapply SP2
but that didn't help.
On Fri, 30 Dec 2005 06:47:02 -0800, O Rako <O
>Hi .I setup a new windows 3K server, move AD on...cant log in to OWA at night
I am getting the "440 login timeout" error when my user login overnight. I cannot find where there might be something limiting time to login. Is it in IIS 6 I am running Win2003 server, EXch 2003 I have only one exchange server that also runs OWA. During the daytime hours no one has any problems logging in to OWA. I have recently moved all mailboxs to the Ex2003 server from a Exch5.5 server. Currently the Exch5.5 server receives all the mail and forwards it to the Exch. 2003 server. not sure if this could be the problem. getting ready to bring down the 5.5 server and change the MX ...OWA and Calendars
I have set up mailboxes for our meeting rooms and have
them set to automatically book the room from a meeting
request. This works with outlook. From OWA I was getting
an error that I did not have rights to send to that
account, so I enabled the anonymous and gave it author
rights, now the email request goes to the mailbox, but it
does not autobook the room. What can I do???
...Exchange '03 OWA re-install
Anyone know of a quick and easy way to do this? I've only briefly looked at
it and looks like I need to completely re-install exchange.
Correct. OWA is now completely integrated into Exchange and is no longer a
component that can be installed separately. What's the reason for needing
to reinstall OWA? I only ask because depending on the problem, it may be
necessary to reinstall IIS as well.
"ben" <firstname.lastname@example.org> wrote in message
> Anyone know of a quick and easy way to...