Unique Excel records only
I am using Excel 2003, and I have three columns of data. Some of the
records of each of the three columns (a) have spaces between them and (b)
Is there a way to pull out the spaces (i.e. the blank records) and eliminate
the duplicate records?
In an attempt to filter out the duplicates, I went to Data...Advanced Sort
and checked the box "Unique records only". But, that was not correct. Some
duplicates and at least one blank record remained.
Any help on this would be thoroughly appreciated. Thanks.
"I went to Data...Advanced S...Backup pst #2
I have unistalled pfbackup (I thought)and wanted to
reinstall it. However the installation detects a previous
installation and suggests unistalling it by clicking "OK".
It then gives a dialogue saying it will have to be
unistalled from windows Add/Remove programs in the
Control Panel, but it isn't there either.
Any clues out there to help me?
...no-ip with exch 2003 #2
I am unable to get my DDNS service to work with exchange 2003. I am sure it
is the way I have it configured on my end. Every message sits in the queue
and says unable to connect with the server or unable to deliver the message
in the time specified.
I can do a nslookup q=mx and it's there but that's for the no-ip MX record.
What sould my local MX recrord FQDN read?
What should my FQDN be of the Exch (SMTP) Server?
On Tue, 09 Nov 2004 19:02:05 GMT, "Brian Paris"
>I am unable to get my DDNS service to work with exchange 2003. I...2 Forms and 2 tables
there are 2 forms (main & sub)
when i make a new record in main form,
the new record is not yet saved / created in table
then i click the sub form button (by macro - openform) for creating
sub-record of this new record.
but there is error cos the new record (main form) has not been created and
so the sub record cannot be created too.
how should i do?
i do not find save macro command so that i can save the main form record
before creating subform record.
Thanks a lot.
The macro Action to save the record is RunCommand/SaveRecord.
But I would normally expect that t...lookup record
is it possible to add more tabs into lookup records dialog:
eg: create a quote -> add a product -> click the find icon then it pops up the lookup record dialog it only shows product name + product ID is it possible to change one of these columns or add new columns?
...Repost-Pass 2 Fields to Another Form-Having Error Problems
Hi All, hope someone can help with a problem that I can't figure out.
I previously posted this problem, but it was never resolved. I have
continued working on the problem, with no luck. I would appreciate
any help that would lead to a resolution to the following problem.
I am trying to pass two fields from PATIENT HISTORY-Form to
frmPersonalHabits. The main form is PATIENT HISTORY-Form which needs
to remain open so that the user can return after the frmPersonalHabits
is completed. I am using a command button named cmdReturnPHForm on
the frmPersonalHabits to return to the main form PA...RUN TIME ERROR #2
We've just finished to install the CRM 4.0. The server and the client.
We change from 3.0 to 4.0 CRM version.
But when we install the CRM client for 1 computer. Installer says OK.
But each time we launch the Outlook we got the same messages :
"Run Time Error"
Program C:\Program Files\Microsoft Office\OFFICE11\OUTLOOK.EXE
this application has requested the runtime to terminate it in an unsual way.
Please contact the applications support team for more information.
After this message i must kill outlook in the task manager.
the next time i should deactivate CRM clien...combo box not updating accoring to record selector
I have a combo box which i use as a search field.
Correct me if i am wrong. Using the code below i am able to select the
record from the combo box and it populates the corresponding values to all
other controls on the form and subform. When i use the default record select
and scroll from one record to another the combo box selection remains in the
last selected value. Can i code to make the combo box record value highlight
the value I have scrolled.
long story short when i select a record using the default record locater the
main form footer section i need it to display th...VCF Files #2
When I try to export a Contact's info to a VCF file the notes section does
not appear. I am running Outlook 2003.
Known problem. SP1 fixes the export, but the problem with missing notes when
you open a .vcf file remains.
Sue Mosher, Outlook MVP
Microsoft Outlook Programming - Jumpstart for
Administrators, Power Users, and Developers
"Maynard James Keenan" <Maynard James Keenan@discussions.microsoft.com>
wrote in message news:36E84589-7231-4334-9524-0D2BF8AB4B07@microsoft.com...
> When I try to ...Message Headers #2
Is it possible to enable message headers for email sent between
mailboxes on the same mailbox store, in Exchange 2003?
> Is it possible to enable message headers for email sent between
> mailboxes on the same mailbox store, in Exchange 2003?
I do not think so. What is the goal?
If my message is helpful, please help me by registering at
http://www.openoffice.org/servlets/Join and voting for the following issues:
http://www.ope...Record not inserting
In the procedure below, there is an edit and an addnew method. The edit
method works fine, and the addnew method gets addressed, but new records are
not created. They don't show up in the table.
Thanks for any help and God Bless,
Mark A. Sam
Private Sub Form_AfterDelConfirm(Status As Integer)
On Error Resume Next
Dim i As Integer
Dim cnt As Integer
Do Until .BOF
cnt = DCount("[drop]", "LoadSheetsST", "[LSID] = " & [LSID] & " And [Drop]
= " & ![Drop]) 'Allows using same number for...How to hide duplicate records but show them once
I'm trying to weed out duplicate records but I need to show them once. I
can't figure out how to do this without alot of formatting and deleting. Can
See Chip Pearson's website for advice on dealing with dupes
> I'm trying to weed out duplicate records but I need to show them once. I
> can't figure out how to do this without alot of formatting and deleting. Can
> anyone help?
if the data is in one column, highlight the column, the select Data ->
Filter -> Advanced Filt...Toolbar Buttons #2
Our IT recently installed XP on my machine (yes, still using 98!). When
using Excel now, I can add buttons to the toolbar, but once I close Excel, I
lose the one buttons that were added. This was not a problem when using 98.
Is there a default Book1 page that XP is not letting Excel see? Or some
Maybe you have a couple of *.xlb files fighting each other.
I'd do this to see if it helps.
windows start button|Find|*.xlb
rename all the ones you find to *.xlbOLD
make a change to a toolbar
windows start button|Find|*...Permissions #2
The client has a telemarketer working leads. When the telemarketer has
secured a demo, he converts the lead. At that time, a workflow kicks in and
assigns the newly created account, opportunity, and contact to a different
owner. That part is working correctly. The problem is if the telemarketer
goes to Account and changes the view to Active Accounts, or Open
Opportunities, or Active Contacts, he can see the ones he created from the
Convert Lead process (no other ones). The client does not want this to
occur. The telemarketer should only see the records he is the owner of.
Does a...IS this possible? #2
Hi there. I have the following in Excel:
A B C D
1 hello 1
2 test 0
3 bye 1
4 hi 0
5 bybye 0
6 tjou 2
now on another place in this sheet i want to see all the words under each
other where the B value is bigger the 0 so:
E F G
So i only want to show th'ose words that have a bigger value. and i don't
want whitelines between the words like this ( =IF(B1>0,A1,"") )
E F G
One non-array play ..
Use an empty col to the right, say col H
Put in...List records not in a set
As you may know from other posts I've made here, I'm playing with
Access to build a small chess management system.
As part of a draw for a match, one of the options to consider is to
match players that have not played one another previously.
To do this, I would like to have a form with a Combo box that is
populated with all the players that the current player have not yet
played (and, as a bonus, not their own record as well).
I can construct a query to list all the players that a particular
player has played before. How can I now construct a query and how do I
put this in the combo...Outlook Installation #2
When trying to install outlook I get an error message
telling me that I cannot install Outlook because I'm either
using Windows in it's Safe Mode or my Windows Installer is
not installed properly,
Anyone had this problem or knows what it might mean??
...Access Runtime 2003 : You are about to delete records message
I've just made a runtime version of my database and the user is being
prompted to confirm record changes/deletes. In my frontend the confirm
Record Changes, Document deletions and action queries are all unchecked.
It's only the runtime user being prompted. How do I stop the confirm
prompts from showing in the runtime version?
As a general design rule, I always used:
currentdb.Execute "name of query or sql goes here"
The above does not prompt for confirmations.
You likely using docmd.RunSql, so you have go:
..... you runsql code ...Last record backcolor
I have samll report with fields, trnDate and Customer and Balance.
Balance is the running sum, I want to change the background color of
Balance if the transaction is last for that month.
Pls I dont want to create group for month.
Since you don't want to do it the easy way you will have to modify the query
that is the report's source.
Personally I would group by month and have a group header with a control that
was set to get the count of records in the group. You can set the visible
property of the header to no so it has no effect on how the report looks.
...DNS MX Question
I am trying to get some clarification that my mx settings are OK. Mail is
sending and receiving OK but I don't think its "by-the-book"
I am running a SBS 2008 domain (lets call it mydomain.local) and I am
hosting my own email server.
I registered my domain name with fasthosts.co.uk (lets call it
I have a static IP address assigned by my ISP (BT - British Telecom)
I have forwarded port 25 on my router to go to the internal IP address of my
On Fasthosts control panel I can set various DNS setting (A, mx, PTR etc). I
original...Duration between 2 dates
I need some help on calculating number of days between two dates
excluding weekends and holidays. Is there a function in sql that can
Like excel has NETWORKDAYS function.
Any help is much appreciated.
Kru (firstname.lastname@example.org) writes:
> I need some help on calculating number of days between two dates
> excluding weekends and holidays. Is there a function in sql that can
> do this?
How would SQL Server know when you have a holiday?
The right approach is to have a calendar table. See here for a couple
of good articles to study:
http://ww...Exchange 2003 Recovery #2
I have to document an Exchange recovery for my environment and not sure where
to start. I took a windows 2003 server, joined it to my domain then ran
dcpromo. Then took it off the production network and moved it to an isolated
network. Installed DNS and WINS, then seized all FSMO roles and cleaned up
the other DC's form Active Directory. Dcdiag is not reporting errors and DNS
I decided to install Exchange with the disasterrecovery switch, but guess
what - it did not install the Exchange services so i cannot do a recovery of
my databases. I tried to uninstall th...formula/s #2
Need your help.
I have these coloumns:
Employee Code Name Status Position DOJ DOL Tenure Reason of Leaving Ed
Level GENDER LOCATION
I have two sheets one with Attrition details and one with Headcount details
(only difference between the two is that Headcount does not have Reason of
1. Tenure has this formula =(F2-E2)/365*12
2. The data is for the previous one year
3. I have monthly headcount and monthly attrition figures.
4. In the Headcount, I have put last date of the month as the DOL (Date of
leaving) so that I can get the exact headcount tenure.
5. Status me...Duplicate records between RM20201 and RM30201?
I recently discovered there are quite a few records that are duplicated
between our RM20201 (RM Apply Open) and RM30201 (RM Apply History) tables. Is
this normal? It would seem that once something gets put to the RM30201 table
it should be removed from the RM20201 table.
If the duplicates in the RM20201 file are, in fact, invalid - how would one
go about fixing the situation?
Bud Cool, Accounting System Manager
HDA, Inc. Hazelwood, MO
GP 9.0, SP2
...Query Records in Linked table
I have a Left Join query to find all the record in the tbl_LogJobData
that do not have link records in the tbl_Check. Tables tbl_LogJobData
and tbl_Check are linked by a primary and foreign (one to Many). How
can I change my query to show me one the records in the tbl_LogJobData
that have only one linked record in the tbl_Check table.
Dim strSQL As String
Dim strWhere As String
Const conJetDate = "\#mm\/dd\/yyyy\#" 'The format expected for dates
in a JET query string.
DoCmd.OpenForm "frmSearchSignBy", , , , , ...