How to create a custom lead attribute and have it survive conversi
I'd like to create a custom attrribute for the lead record and have it
survive conversion to an account and opportunity record. How do I go about
Applies to CRM 3.0 SBE
The basic steps would be to add a corresponding custom field to your account
and opportunity entities, and then edit the relationship mappings for
Leads>Accounts and Leads>Opportunities. Save and publish your changes and you
should be good to go.
Matt Wittemann, CRM MVP
> I'd like to create a custom attrribute for the le...migrate
How migrate server exchange 5.5 to another exchange server
5.5 with another site and organisation
...Exchange 2003 Send as Permissions
I am running a 2003 Exchange server.
I set the 'send as' permission via the 'Permissions' (edit ACL) tab for
User1 to send on behalf of User2.
This then works for around 24 hours, at which point the permissions are
I assume that some type of maintenance routine is removing the relevant
permissions, not sure why or how however!
I know you can set the 'send on behalf of' setting but this displays the
mail in a way that the recipient can tell who has really sent the mail - my
customer does not want this!
Any suggestions (sensible ones anyway) would be great...Exchange, Win, AD 2000 to 2003 upgrade
I'm planning out the upgrade of a 2000 AD and Exchange 2000 all on
separate W2k boxes (FE & BE config) to a fully AD/Win/Exch 2003
environment. I'm planning on the following steps:
1) Upgrade Exch 2000 FE to Exch 2003 FE
2) Upgrade Exch 2000 BE to Exch 2003 BE
3) Upgrade FE to Win 2003
4) Upgrade BE to Win 2003
5) Upgrade 2000 AD to 2003
I'm trying to figure out any advantages to doing the AD upgrade before
or after the Exchange upgrades. I've seen it recommended to do it
first, but it seems like six of one, half a dozen of the other to me.
Can't find any tech doc th...rules not migrated when migration to Exchange 2000
...Exchange 2003 Startup Problems
Got into the office this morning to find our exchange server not working.
Getting these errors in the log file, the mailbox store won't startup.
event id 455 - ESE
Information Store (4888) First Storage Group: Error -1811 occurred while
opening logfile D:\Program Files\Exchsrvr\EXCHANGE.log\E0001E02.log.
Also getting event id 9518 that the information store won't start up.
Anyone have any ideas how to rectify this? The log file it's talking about
doesn't exist on the machine, the last log file i have is E0001E00.log from
1.43am this morning.
Thanks for you...sender filtering on exchange 2003 server
i setup an exchange 2003 server to retreive it's e-mail from a provider's
POP3 server for the time being due to the fact that the MX records haven't
been changed yet. Now i enabled senderfiltering on my exchange server and it
doesn't seem to work
Question: Does this have anything to do with the pop3 mailbox of my provider
or is there something else going on alltogether??
"Computers are useless, they can only give answers...." .. (Pablo Picasso)
Obviously no one knows or nobody wants to help
> i setup an exchange 2003 server to re...How to make primary contact the default recipient for all actiitie
I'm using CRM 4, and would like to know if it's possible toto make the pimary
contact of an Account the default Recipient for all Activities. If so, how?
...Migration to full 2003 exch and domain with badly named Directory
I have an NT4 domain with Exch 5.5 on a BDC. The BDC is named in the format
AA_BB, where the "_" character is not allowed under 2003. I understand how
to rename the serveron the domain only, before upgrading the domain, but
from the exchange point of view what do I do.
do I have to exmerge everything and then exmerge back into a full exch 2003
do I create a new exch 2003 server on a different machine but same site as
5.5 and use the move mailbox util
Ideally there would a utility I could run on the 5.5 server to rename the
relevant properites prior to a...outlook 2003 connecting to Exchange Server 2003
I have a multihomed environment and am trying to connect
my user to my exchange 2003 server. The Primary NIC is
used for Internet access and the Secondary is used the
connect to my Exchange server. When I setup Outlook 2003
in the Exchange Server field it always wants to resolve
the server name to the FQDN. Then it searches for the
public IP Address on the Primary NIC. If I ping the
server name it knows which NIC to use and doesn't have a
problem. How can i set it up to only look for the server
try entering the IP address of the server instead of the name for
resoluti...Exchange 2003 computer account
I am running Exchange 2003 on Windows 2003
One of my admins was trying to test the exchange
restore, but he screwed up. He setup a test network,
isolated from production network. He tried to do restore from tape, etc,
I still don't know exactly what he did, but our production
exchange is not part of network anymore..
I notice the Exchange server name was missing from Exchange Domain Servers
in AD. So I added back in. The computer name is still in AD. However we
login into Exchange server into domain. When I try to do that, I get a
Window...Restrict items to customers
I have a client that sells pharmaceutical and non pharmaceutical products. Is
it possible to restrict certain items to certain customers to avoid that a
product for a drugstore cannot be sold to a supermarket.
Sort of but not 100%...here is how.
Use customer part numbers. You can have only one part number for a specific
item but assign it to the customer using the customer part number cross
reference table. So say part 100p is a CVS product with CVS labeling. Enter
the part in your inventory then list it in the customer part number cross
reference under customer ...Groupwise to Exchange Migration
I migrated my Groupwise account as a preliminary test, deleted all of the
individual emails in the mailbox, and then started the migration for all
users. During the migration (the 2nd time), all of my older emails did not
migrate the 2nd time, although they did migrate the first time.
Is there anything that I can do, or that needs to be done, to allow all of
my past emails to be migrated again?
Shadow Mountain Ministries
San Diego Christian College
Southern California Seminary
Christian Unified Schools of San Diego
...Migration tool crashes when migrating from Lotus
I'm having problems with the migration tool when
migrating some users. What happens is that once it starts
up, the tool crashes with no error codes and the domino
server crashes as well.
I'm running exchange 2003 and domino 6 on win2k and I'm
migrating it all on the same box. I know it says not to
but I've already killed a test server because of this and
don't have another one handy.
As I said, I can migrate the majority of users fine, but
for some reason it does not like these users.
If anyone has any suggestions or has come across
something like this it would...Exchange 2003 Statistics
How do you find out the number of emails your Exchange server processes per
day? Senior administration loves these statistics but I don't know where to
extract this information. Looking for the number of emails sent internally
Message Tracking logs, PerfMon, 3rd party products (you can start your research
> How do you find out the number of emails your Exchange server processes per
> day? Senior administration loves these statistics but I don't know where to
> extract this information. Looking for the number of emails s...Exch 5.5 to 2003 ADMT \ ADC migration order question
I've been reading posts and performing tests in the run up to a
Exchange 5.5 to 2003 intra-org migration.
In everyone's opinion, which is the best order
-> ADC (not enabled)
-> ADMT to create new AD account (run in batches)
-> ADClean to marry disabled place holder and new account (run in
-> movemailbox ( in batches as part of rolling migration)
The above seems to have issues with no self rights so if you remove
SIDhistory after the migration is done, wont the systems permission go
bang as it's masking the lack of self rights?
-&g...Cannot remove Exchange 5.5 Server from Site!
Hi everyone - I have an Exchange 5.5 system with 4 NT4.0 SP6a Servers all
running 5.5 SP4. I have to remove the first server in the site and have
completed the migration of the first server in site roles to one of the new
BUT - now when I shut down the server I am trying to de-commission (as a
test to see what happens with it turned off), some of my Outlook 97 users
and Outlook 2001 Mac Edition users freeze up. It appears that with the OL97
PC Clients, deleting the profile and re-creating it works OK.
HOWEVER, re-building the OL 2001 profiles on the Apple Macs has no effect...user files in exchange
How can I program exchange to delete "delete" folder contents after 5 days?
How about the "sent" contents after 30 days?
You dont mention what version of Exchange you have, but you can use the
Mailbox Manager feature, here are some links that should help you out:
Exchange 2000 SP1 & Exchange 2003
...How to keep SBS 2003 server running after migrating to SBS 2008
I've successfully migrated from SBS 2003 to SBS 2008 on a new machine.
However, I have some apps running on the old server (ACT & Quickbooks) that
I'd like to keep on this machine. The documentation states 'If you want to
repurpose the Source Server, the simplest way is to reformat and install a
new operating system'. What's the hard way?
In other words, is there a way to get the machine back in a healthy state
without installing a new operating system or reformatting the hard drive so I
can use it to run these apps?
SBS 2003 can't be used as a demo...ISA Server 2006: Exchange publishing
I am lost, please help!
I can't get OWA and OMA/exchange-activesync to work at the same time using
a single listener/ip address. I thought a big benefit of ISA 2k6 was that
one can publish everything using one single external ip address?
I want to use FBA for OWA. In the listener I configure ISA to use FBA (on
isa level) but when I do that OMA doesn't work anymore. When I set the listener
to basic authentication however OMA (and exchange active sync) works fine
but than I don't have the ISA FBA anymore, which is obvious.
How can I make both work at the same time? I now...The Microsoft Exchange Information Store service terminated with service-specific error 0 (0x0).
I'm currently running an exchange 2003 sp2 on a Windows 2003 SP1
Domain Controller with Mcafee virus scan 8.00
Its been running fine for about a year. Recently the information store
terminates intermittently with the following error. I can restart the
Microsoft Exchange Information Store service
Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7024
The Microsoft Exchange Information Store service terminated with
service-specific error 0 (0x0).
I've installed Exchang...Exchange System Manager cannot manage Exchange servers in different domain
I have three Exchange servers in one organization (two
Exchange 2003 Enterprise edition and one Exchange 2000
standard edition). Each server resides on it's own
domain but the three domains are part of one AD forest.
I am not able to check the status of the objects in the
information store on the other servers when I am using
the Exchange System Manager from one server. I can only
see the status and properties of the Exchange server that
I am currently using ESM on. Whenever I try to access
the mailbox store or the public folder store of a
different Exchange server, I get thi...Exchange 2003, services keep stopping every few minutes
All of a sudden, exchange services keep stopping and I have to manually
restart. It runs again for a while and stops again.
Any suggestion ?
there must be something in the application or system event log...?
Susan Conkey [MVP]
"Mehbs" <email@example.com> wrote in message
> All of a sudden, exchange services keep stopping and I have to manually
> restart. It runs again for a while and stops again.
> Any suggestion ?
...migrating from 5.5
We intend to go t Exchange 2003 and are looking for the
best scenario. We would like to change our mailsite name.
1. Can we change the mailsite name, then build a new 2003
server in the same site and use the migration wizard?
2. Can we build an exchange 2003 server in the same site
and then once in native mode rename the site?
3. Or do we have to build an exchange 2003 serverm in a
I am working on migrating outlook express folders from a
old computer to Outlook 2003 on a new computer. I used
the file/Import,Export feature but not all of the folders
contain information. There are a total of six folders
that need to be Imported. Outlook created the folders
under personal folder but only two contain the messages.
The other four are empty. I have tried to move them
individually with no success. If anyone has a theory on
how to accomplish this please let me know. Thank you.