I have MS Money 2007 Deluxe and would like to know how to disable the
auto-fill function in the account register. Everytime I go to enter a new
transaction, a list of previous entries automatically pops up and if I am
going to fast I select one of those transactions as a new one...very
irritating. In my last version of Money (I think it was 2004) I was able to
disable this function...any help out there!
Tools|Settings|Global Account Settings|Transaction entry options|Use
"stiglo" <email@example.com> wrote in message
news:CBEEAE9F-6...Mousemove event problems
I'm using the mousemove event to make my listboxes drop-down (by increasing
height property). I have three listboxes in a row vertically. However, I find
that the mousemove event of the listboxes below gets triggered when I move
the cursor over them even though I'm still in the first listbox. Is there a
way to disable the mousemove event for the listboxes underneath the one I am
currently in? Or, is there a better way to do this?
mouseover instead of mousemove?
> I'm using the mousemove event to make my listboxes drop-down (by increasing
&...Adding a new Journal Entry through the Activities Page in Contacts Folder
In Outlook 97, there used to be a check box on the
Journal Page of Contacts that said "Track all Journal
Entries for this Contact". There was also a button on
the bottom of the page that let you add a new Journal
I can't find out how to do this in Outlook XP. The help
file says to go to the main "Tools/Options", and check
the list of contacts you want to monitor, but this is a
real pain every time you add a contact. Also, it doesn't
solve the problem of adding a new journal entry for a
I thought I was getting close. If I go the the
ac...Exel Data Entry
When entering data into an excel spreadsheet, it starts to recognise
repetitive words being used which is very handy and time saving, however, one
of the columns has stopped recognising anything. There are no blank spaces
and I can't understand why it has stopped picking up the previous words.
Any suggestions would be much appreciated.
If there are many similar entries, Autocomplete may appear to stop
working, because so many letter must be entered before a unique match is
Or if you're far from the previous entry, it may not be detected, as
described in the fo...drop down data entry
I couldn't find what I was looking for on contextures so I thought I'd
submit it here.
I have a small spreadsheet that does a very basic calculation. In this
spreadsheet I have a 2 column list. Column 1 has the name of the item and
column 2 carries its value. (A1 = Item 1, B1 = 500)
I've created a dropdown list from column 1 and would like the value for the
item selected from column 2 to be entered into a different cell.
I think I've done this in the past using VLOOKUP but I can't figure out how
I did it. Can someone please give me a clue?
H...Sales Transaction Entry #5
I am having trouble when transferring Order to Invoice that and values in
the freight field are lost.
This post is a suggestion for Microsoft, and Microsoft responds to the
suggestions with the most votes. To vote for this suggestion, click the "I
Agree" button in the message pane. If you do not see the button, follow this
link to open the suggestion in the Microsoft Web-based Newsreader and then
click "I Agree" in the message pane.
At least 90% of the occasions I use Edit > Find, I want to search by
column and look in values. I therefore 'find' it irritating that my
search defaults to rows and look in formulas. Can anyone suggest how
to change these defaults?
While I'm on the subject of defaults, anyone know how to amend the boot
time value of Autosave Period. I would like to default to 30 mins, I
have tried changing the Registry key but it keeps resetting itself to
timwight's Profile:...Is there a way to clear all historic calendar entries?
Is there a way to clear all historic calendar entries. If there is a
recurring meeting that some have happened in the past and there are still
some meetings that haven't happened.....will the future meetings be deleted?
Can you choose just to clear "some" entries?
"JLR" <JLR@discussions.microsoft.com> wrote in message
> Is there a way to clear all historic calendar entries. If there is a
> recurring meeting that some have happened in the past and there are still
> some meeting...What causes MCTE entries?
We just upgraded from 7.5 to 9.0 and are now seeing MCTE entries
automatically hitting the GL following the posting of our Quick MO's. These
are in addition to the normal entries that hit raw materials and finished
goods. What causes these MCTE entries?
And just for the record, what does MCTE stands for?
Mariano Gomez, MIS, MCP, PMP
Maximum Global Business, LLC
> We just upgraded from 7.5 to 9.0 and are now seeing MCTE entries
> automatically hitting the GL following the posting of our Quick MO's. These...Banking Log On Not Taking
I'm trying to update my password for my bank and when I hit update it doesn't
log on to grab the new transactions. When I go back into my banking
information I noticed that the new password did not take....what am I doing
I figured it out. I had my security questions wrong. As soon as I changed
them everything was OK. Hope this helps others.
> I'm trying to update my password for my bank and when I hit update it doesn't
> log on to grab the new transactions. When I go back into my banking
> information I noticed that the new ...Event id 9220 , Source MSExchangeMTA , Category Operating System
I am Using MS Exchange Server 2003 with MS
windows 2003 Enterprise Edition and it is showing me the
following error several times a day. Can somebody Please
tell me what is this all about and how can i solve it?
Source :MS Exchange MTA
A sockets error 10047 on an open() call was detected. The
MTA will attempt to recover the sockets connection.
Control block index: 0. [BASE IL X25 DRIVER 10 261] (12)
For more information, click
How many servers you have on your network?
Are there ...Drop Down plus any entry
User wants a drop-down list for common entries but also the ability to enter
anything into a cell. I thought Data Validation would do the trick, but I
don't see how to get the common entries to drop down AS WELL AS the ability
to enter by hand. Can someone point me in the right direction please?
Select your cell.
Click on Data - Validation
In the "Allow:" box, select "List"
In the "Source" box, type in your common values, such as
Common1,Common2,Common3. Don't put a space between them.
Select the Error Alert tab
Uncheck the "Show error a...Manual entry vs. Swipe on MSR
I am using a Touch Dynamics Cobra. Even though we swipe the credit cards,
Point of Sale is indicating that these were manual entries. Vital /
Paymentech then charges us for the addtional fees since it wasn't "swiped".
The MSR is connected via PS2. So far calls to Microsoft / Paymentech / Vital
haven't proved successful.
I spent a year tracking down a similar problem. RMS makes the determination
if a card is swiped or manual depending on certain characters it reads in
the mag stripe. Occasionally a cashier will get a popup notice (can't
remem...Irritating message in Outlook
I've got Outlook 2002 (SP3 recently installed), running on XP Home. Zone
Alarm and AVG are my default firewall/virus protection. I run adaware and
spybot S&D regularly. I have no strange emails in my inbox or delete box.
Over the last week or so I get an irritating message whenever I start up
Outlook, which says :
A program is trying to access e-mail addresses you have stored in
Outlook. Do you want to allow this?
If this is unexpected, it may be a virus and you should choose "No".
Tick box then Allow Access for dropdown menu of 1,2,5,10 mins.
The...How can I "undo" an entry on a form/subform while still entering data ? 11-16-07
I have a form/subform for entering invoice data. What can I do if I
realize that I have already entered the invoice ? Example: I enter
the main form data and enter 5 lines of detail on the subform and then
I realize that I have already entered this invoice before ? I would
love to have a button that I could click that "undoes" the entire
Is there a way to do this ?
Thanks in advance
When you enter the main form record, and move into the subform to enter the
line items, the header record saves into its table. Consequently you can't
just "und...SOP Transaction Entry Alternative
I have written a VB.Net application that uses econnect to Manage
customer accounts and create invoices.
Sales Payment Entry with Live Credit Card Processing
Advanced Customer Search / Lookup
- This feature normalizes address matches
for example 255 N Main Street would also match:
255 North Main St.
255 N. Main St.
255 N Main St
Built in Address Validation / Correction Module
Manage Customer Addresses and Contacts
View / Edit Customer Invoices
Sales Batch Creation
Create / Edit Customer and Sales Transaction Notes
Customer...Event ID 8331 #6
There is nothing (at least that I can find) about an error
that is being logged once a minute on my SBS 2003 server.
The description of the event is:
The service threw an unexpected exception which was caught
The source is MSExchangeAL, and the Category is Address
Anyone have any ideas?
Thanks in advance!
There is a hotfix to fix this error..You will also notice that new users are
not being stamped with email properties...Call Microsoft for a free
hotfix..The hotfix will stop all email services but does not...drop down menu with calendar entry
I have figured out creating drop down menus using the validation option but
what I would like to do is have a scrollable calendar in that field. Is there
a way to put a calendar in pull down menus or would someone recommend another
way to approach this?
I have a calendar demo on my site
Microsoft MVP - Excel
"Pip" <Pip@discussions.microsoft.com> wrote in message
>I ha...Clearing entries for Interfund
We have activated interfund management and set up the accounts using a
Single Due to/Due from. Normal entries from the GL and other subledgers work
as they s hould but clearing journal entries do not product a due to/ due
from distribution. Is this working as designed? Do clearing entries not
produce the interfund distributions?
...Restrict spreadsheet to data entry only
Fairly new to Excel. Once I've set up the structure of my
spreadsheet, and entered the formulae for calculated cells etc, how
can I ensure that the spreadsheet is used just for data entry and that
the structure cannot be altered in any way?
You can use protection.
You need to go to every cell you want for data entry and unprotect tha
cell. You can select multiple cells... right mouse click... Then hi
format cells... The last tab says protection, select it and click th
check box to unprotect these items.
Now you can then in the menu bar hit Tools... Protection... and the
Protect...Calendar entries not visible on PC
Operating System: Mac OS X 10.5 (Leopard)
Email Client: Exchange
In a mixed estate of Macs and PCs there is one Entourage user whose calendar entries are not visible to PC users with cached exchange mode switched on. All other Entourage users are OK. <br>
As soon as cached exchange mode is switched off and Outlook reopened, the calendar entries are visible. <br>
Does anyone know if there is a setting within Entourage that would prevent the calendar from being cached?
> This message is in MIME format. Since your mail reader does not unders...Forcing Combo box entry in VBA
In my user form, I have several combo boxes that take their source from
various named ranges.
The drop down lists work fine but at the moment, a user is able to overwrite
whats in the dropdown.
How can I ensure that only what is in the drop down is chosen?
"Anthony Slater" <AnthonySlater@discussions.microsoft.com> wrote in message
> In my user form, I have several combo boxes that take their source from
> various named ranges.
> The drop down lists work fine but at the moment, a user is able to
o...damaged tracking logs #2
Running Exchange 5.5 SP3 on Windows NT 4.0 SP6a.
I've recently started getting following error messages when
attempting to search the tracking logs via the admin console:
"The message tracking log file '\\<SERVERNAME>\Tracking.log\<DATE>.log' has
a damaged entry at line <LINENUMBER>. Do you want to continue reading the
file and attempt to recover the remaining entries?"
<DATE> and <LINENUMBER> are always different.
If I click YES, the search continues, at least until another error message
If I click NO, I get another dialog box s...eConnect-Journal Entry
Is it possible to make Journal Entry using eConnect?
If possible kindly give me sample for passing journal entry using econnect.
Iam using dot net 2003.
If anyone have examples of eConnect for dot net 2003, kindly send me, i will
be highly highly appreciated.
Thanks & Regards
Absolutely you can.
I have created a service to read a raw SQL table and let my service pump it
into GP by way of this:
eConnectType eConnect = new eConnectType();
taGLTransactionHeaderInsert myGLHeader = new
taGLTransactionLineInsert_ItemsTa...Checking logs of 'refused' spam
I implemented DNSBL on my Symantec AV software, Exchange 2000, connector
I enabled SMTP logging.
What type of code or information should I be looking for in the logs to
assure that Spam is being blocked as it should ?
As far as I know, there is nothing logged, per what Symantec told me, all it
shows is the number of checks and rejections. Go to your symantec page,
then click on Statistics, then look for the DNSBL section.
"Marlon Brown" <firstname.lastname@example.org> wrote in message
> I implemented DNSBL on my Syma...