IMAP #3

Exchange 2003 SP1 
Front-end :  OWA server with SSL
Need some mobile users to connect to IMAP server with SSL

Can this server (FE OWA Server) proxy SSL IMAP request to the backend server 
? 
If yes can I use the same SSL that’s for OWA or I need to get another? 

Is there any documents talking FE-BE IMAP or Exchange IMAP ?

Thanks..
-- 
Nawar Aljanabi
MCSE NT/2000/2003,MCSA 2003 +M,CCNA
0
Nawar75 (62)
12/15/2005 7:04:03 PM
exchange.admin 57650 articles. 2 followers. Follow

1 Replies
1001 Views

Similar Articles

[PageSpeed] 25

Yes, that will work.  Just make sure you are pointing your IMAP clients at 
the OWA public certificate name, otherwise you'll get an error.  If I 
remember correctly Exchange will set this up correctly on its own when you 
install the cert.  If not, goto Exchange System Manager and drill down to 
the IMAP4 virtual server (under protocols).  Right-mouse and choose 
properties and then click on the Access tab.  From here you'll see the 
Certificate button and can add/remove certificates.

-GT


"Nawar75" <Nawar75@discussions.microsoft.com> wrote in message 
news:AD1A578C-76FC-4280-BEB3-0964F3CB6918@microsoft.com...
> Exchange 2003 SP1
> Front-end :  OWA server with SSL
> Need some mobile users to connect to IMAP server with SSL
>
> Can this server (FE OWA Server) proxy SSL IMAP request to the backend 
> server
> ?
> If yes can I use the same SSL that's for OWA or I need to get another?
>
> Is there any documents talking FE-BE IMAP or Exchange IMAP ?
>
> Thanks..
> -- 
> Nawar Aljanabi
> MCSE NT/2000/2003,MCSA 2003 +M,CCNA 


0
GT
12/16/2005 1:18:14 AM
Reply:

Similar Artilces:

IMAP
Hi, I would like to enable IMAP to my Exch2003 server, but the service is not there. How do I install IMAP4 ? Thnaks. Matt On Sun, 21 Dec 2003 15:50:51 -0800, matt wrote: > I would like to enable IMAP to my Exch2003 server, but the > service is not there. > > How do I install IMAP4 ? Well IMAP4 is there, the service is just disabled per default. You will need to enable and start in under Services. (Microsoft Exchange IMAP). Regards -- Henrik Walther http://exchange-faq.dk ...

strange imap connection problems
My imap connections seem to be flaky (only imap, pop3 is fine) the first time i load outlook and send/recieve it works fine. then every time after that my machine fails on the dns lookup of the mail server. (even nslookup in console fails) any ideas whats causing this? cheers, -ciaron ...

OWA Address Book #3
Another issue is that when sending an Email, in Outlook, the address book will display all recipients. In OWA, it doesn't display the list anymore. So, any suggestions how to make it display the list instead of searching? thanks. -- Curiosity On Sun, 14 May 2006 07:15:01 -0700, curiosity <curiosity@yahoo.com> wrote: >Another issue is that when sending an Email, in Outlook, the address book >will display all recipients. In OWA, it doesn't display the list anymore. So, >any suggestions how to make it display the list instead of searching? thanks. OWA doesn't do...

CRM 3.0 Reports #2
I would like to Edit Existing Report and save but i am unable to save the existing report after changes as i have full control over CRM. Kindly Advice, Thanks, Syed. Try the following link on "Create a report in 15 minutes or less", provides details on mscrm 3.0 report creation: https://www.microsoft.com/dynamics/crm/using/customizing/reporttutorial.mspx Frank Lee, Microsoft Dynamics CRM MVP http://microsoft-crm.spaces.live.com http://www.workopia.com/Links.htm "TCorck" wrote: > I would like to Edit Existing Report and save but i am unable to save the > ex...

Creating a query to select 1 of 3 tables
I have an Access database that uses three primary tables that are linked to an SQL database. The tables have millions of records and cannot be be joined using a union query due to the inefficiency of running queries across the network. I'm needing to create a query that will call the correct table when criteria is selected in a form using a drop down menu. I'm thinking an "if else" statement may work but not sure if this can be used in Access. An example could be: If [Forms]![Pick]![segment] = "WIS" EXEC [WIS query] ELSE If [Forms]![Pick]![...

Hyperlinks #3
I am using Publisher 2003 and have 10 thumbnail pictures in .jpeg format on one of my web pages. I want to hyperlink each thumbnail to the .jpeg in it's original size. After I publish the site the thumbnails indicate a link but I get a "Page cannot be found." Does anyone have any suggestions Did you upload the image files as they are normally in another folder. -- "If you don't know where you are going, any road will take you there!" Hello, What is the link information provided for the thumbnails to point the .jpeg files? Regards, Jagadeesh.P -------...

I am unable to send e-mails -unable to download files from IMAP.
Please help. I am so frustrated with this In news:4564BC25-92D9-4094-A598-A23848856E5F@microsoft.com, ajmtextiles <ajmtextiles@discussions.microsoft.com> typed: > Please help. > > I am so frustrated with this I can understand why you might be frustrated, but you've provided no useful information for anyone to go on, so I doubt anyone can help you. When you post in here, always include your version, SP level, and mode (if applicable) of Outlook - you can find this information in Help | About. Also include the type of mail account(s) you use and any other pertinent de...

Hyperlinks in 2003 version #3
My workplace just upgraded to Microsoft Office 2003. Can you insert a hyperlink to a pdf file, or does it just work for office files. I linked to a pdf file and it opens adobe for a split second then closes. Any ideas on what I am doing wrong? Thanks, Mike -- Cbravo212 ------------------------------------------------------------------------ Cbravo212's Profile: http://www.excelforum.com/member.php?action=getinfo&userid=25615 View this thread: http://www.excelforum.com/showthread.php?threadid=390311 Try downloading some updates from Adobe's web site. I use 7.0 and experie...

Unit of Measure #3
Is it possible to change the default unit of measure value which is "each" for non-inventory items in the sales module. Thanks Randall Farris randyf@nbsys.com Randall- The U of M is hard-coded and is automatically entered when the system detects entry of a non-inventory item. You can type over this field with whatever U of M you want. We have a Shareware package that includes the ability to define a new default value for the U of M for non-inventory items. If you are interested, please visit our website to download the software. Brenner www.KlenzmanConsulting.com "...

printing #3
Hi, I have to print something that is different from the corresponding view. My problem is that i have to place elements at specified places (given in mm) and I can't figure out how can i make corelation between device coordinates, logical coordinates and how to transform them to mm ( and back). Any hint is welcomed (it's v urgent) Thanks you in advance, Andrea In article <#gwzqsZcEHA.3300@TK2MSFTNGP09.phx.gbl>, anastasescu_a@yahoo.com says... > Hi, > I have to print something that is different from the corresponding view. > My problem is that i have to place eleme...

Setting Gmail IMAP
I previously used Gmail as POP but I have just changed it to IMAP so that I can keep my PC (WLM), my iPhone and my webmail all in sync. Now I need some advice. 1. In addition to my inbox,sent etc folders I also have a folder called All Mail that indeed contains all messages I have ever sent or received. It is therefore very big. How can I stop that folder showing up in WLM? 2. When I delete items in WLM the are not going to the Bin (deleted folder) They just vanish. The deleted folder is a useful facility as at times I may accidently click to delete the wrong message. How c...

imap
Hello All, I have win2k SBS server providing email for about 20 users. Their internet connection, to the office where the exchange server lives, is 512k guaranteed up and down I believe. The clients that have desktops are set up as exchnage clients via Outlook 2k and XP. The laptop users are set up as imap clients via outlook because they will be using a dial up connection most of the time on the road or away from the office. My problem starts when an imap client's mail box gets over 100mb and then they start to get time out issues even if they have a high speed connection at the time...

IMAP #3
Exchange 2003 SP1 Front-end : OWA server with SSL Need some mobile users to connect to IMAP server with SSL Can this server (FE OWA Server) proxy SSL IMAP request to the backend server ? If yes can I use the same SSL that’s for OWA or I need to get another? Is there any documents talking FE-BE IMAP or Exchange IMAP ? Thanks.. -- Nawar Aljanabi MCSE NT/2000/2003,MCSA 2003 +M,CCNA Yes, that will work. Just make sure you are pointing your IMAP clients at the OWA public certificate name, otherwise you'll get an error. If I remember correctly Exchange will set this up correctly on...

=SUMIF(Rewards!$AH$3:$BI$3, ">Targets!O30:<O31", Rewards!$AH$20:$BI$20)
=SUMIF(Rewards!$AH$3:$BI$3,Targets!O30, Rewards!$AH$20:$BI$20) =SUMIF(Rewards!$AH$3:$BI$3,Targets!O30, Rewards!$AH$20:$BI$20) In the above equation I am trying to get a total using sumif. The rewards cells row 3 refer to a range of automatically generate consecutive date cells. The target cell is a manually entered date The reward cells in row 20 are automatically generated numbers. What I am trying to do is have the calculation check for the date i Targets and then only sum the numbers that are entered on dates equa or after that entered in targets I also tried =SUMIF(Rewards!$AH$3:$BI$3,...

Problem with columns and imap
I'm having problems with the with windows live mail and the columns on my imap email account. If I change columns in the inbox the columns in the sent mail box changes to the also. How can I set the columns in each folder independently? I have no problems doing with with my pop account. Thanks in advance for any help. ...

IMAP to Ex2k3 Migration command line
Morning, All. I'm looking for information on doing a migration from an IMAP server to Exchange 2003. I have found information in the deployment guide, and setup the CSV files (which work from the GUI) and control files. However, every time I run the process, the grey window with the progress bar appears, and then dissappears almost immidiately. The last message I see is "connecting to MAPI" - then, it's gone - no errors in the event logs, just a "Migration starts, Migraton Stops". I have used the command line version of the migration tool before to do an Exchang...

Reinstalling CRM 3.0
Hi Due to a problem on IIS i unistall CRM and try to reinstall using the database i allready have. I get the following error "Action Microsoft.Crm.Setup.Server.GrantDatabaseAccessAction failed. User or role 'CRM\CRMDATA$' already exists in the current database." (CRMDATA is the name of Domain) Does anybody know what is this message about because the installation fails after this point. Thanks. ...

Deleting IMAP messages from a deleted IMAP account
It's wee bit strange: I configured an IMAP account and later deleted it. Now I see a a few IMAP messages (with headers alone) in "My Outlook" Inbox (NOT IMAP Inbox, as I don't have that anymore) that I want to purge. But everytime I attempt purging MS Outlook asks me to download the message, which I cannot as I don't have the IMAP account anymore. I tried adding the IMAP account but this time the IMAP messages are downloaded in the designated IMAP Inbox. Any thoughts will make my day! Naren ...

Email Tracking in CRM 3.0
My company just purchased CRM 3.0 -- during the sales process, we were led to believe that it would be possible to use the system for outbound email campaigns that would track individual click-thrus. In short, we want to be able to send out HTML messages to a list, such that each individual message contains a "personalized" link, so that when the recipient clicks on that link, that action is recorded in the CRM system. Ideally, we'd also like to be able to record which recipients open the email, using a clear gif. Put another way, for each individual we sent the email to, ...

Auto numbering #3
How do I insert an auto number in the invoice# cell in invoice template just like in 2000 version? Hi see: http://www.mcgimpsey.com/excel/udfs/sequentialnums.html -- Regards Frank Kabel Frankfurt, Germany "DOU" <DOU@discussions.microsoft.com> schrieb im Newsbeitrag news:1618CE02-261F-4415-B8D3-CC9F198558A9@microsoft.com... > How do I insert an auto number in the invoice# cell in invoice template just > like in 2000 version? ...

PersonalFolders to use IMAP
I'm setting up Outlook 2003 and moving from Outlook 2002. When I started Outlook03 it asked me to set up my email account, which is an IMAP account. It created the Personal Folders, but then a seperate top level folder for my IMAP account. Is there anyway to get the IMAP account folders to be in the Personal Folders tree? When I try to go into Tools, Email Account, View or Change..., Deliver Mail to ..., the IMAP folder structure is not listed as an option, on the Personal Folders. I had this setup working in OutlookXP on my older machine, but can't seem to figure out how to do it...

attachment #3
How do you open attachments with another application. If Windows is setup to open .bmp with Internet Explorer and I want to open it in Paint but I do not want to do it all the time then how could I get Outlook to open it and select the application. Basically I am looking for an Open With option. Right click the attachment and "save as", saving it wherever you want. Then go to that location and right click the file and select "open with" "Paul Marques" <dcomputer@hotmail.com> wrote in message news:023a01c3578c$8f13e6f0$a301280a@phx.gbl... > How d...

3.0 to 4.0 conversion
We are getting an error when the 4.0 install is doing it's upgrade review. We are getting "The unique constraints in the CRM database are not consistent with the Dynamics CRM 3.0" Then we get the "Stored procedures in the CRM database are not consistent..." Then "Setup has detected customizations that have not been published..." However, any customizations, and they are minor, are published. Anybody have any thoughts? ...

Adding a Gmail IMAP tag/folder to Entourage
I created a new Gmail tag called travel. In Mail it immediately appears as an IMAP folder. How do I do this in Entourage. I refreshed the message lists etc. On 5/15/10 3:46 PM, in article 9dd4e304-c593-4248-866a-b79e0324ea27@q8g2000vbm.googlegroups.com, "Kerry" <kerry@fastmail.net> wrote: > I created a new Gmail tag called travel. In Mail it immediately > appears as an IMAP folder. How do I do this in Entourage. I refreshed > the message lists etc. Click on the account in the folder list. Select "Receive complete folder list". -- Diane Ros...

Auction Software #3
AJ Auction Pro is the best Auction Portal script software available in the Universe. Being a PHP /MYSQL Script providing complete online auction solutions, it has now expanded to offer services such as Merchant Solutions, Packaged Software and Enterprise Solutions. Unlike the various majorities of services out there we make a difference! Sources: http://www.ajauctionpro.com/ ...