GAL issue - Ex 2003 in 5.5 site w/ remote 5.5 site

Our existing Exchange 5.5 organization consists of two different sites,
each in its own NT 4.0 domain, so call that siteA and siteB in domainA
and domainB for simplicity.  They share a common GAL between them as
you would expect and all is well.

I've just installed the first Exchange 2003 server in a Windows Server
2003 AD domain (call this domainC) and placed the Exchange server into
siteA.

Trusts are in place between domainA and domainB (previously), between
domainA and domainC (for the migration), but not yet between domainB
and domainC.

The problem that I see now is that GAL for users who have been migrated
to the new Exchange 2003 Server is incomplete...i.e. it does not have
any entries from siteB in it.

Is this simply an issue of I don't have the trusts built betwen the NT
4 domainB and the new AD domainC?  Once those trusts are built, can I
expect this issue to go away?

Thanks,
Will
0
1/11/2005 10:42:51 PM
exchange.admin 57650 articles. 1 followers. Follow

2 Replies
431 Views

Similar Articles

[PageSpeed] 42

To make sure I understand...your Exchange 2003 users don't see the SiteB 
Exchange 55 users, correct?

Sounds like you haven't created an Recipient Agreement between SiteB and AD. 
The Exdeploy tools that come with Ex2003 should help you get that sorted 
out.

Good luck.

-- 
This posting is provided "AS IS" with no warranties, and confers no rights.
Please do not send email to this address, post a reply to this newsgroup.
"Will S" <dontpanic1.nospam@hotmail.nospam.com.nospam> wrote in message 
news:xn0dx4tw98kttq9000@news.microsoft.com...
> Our existing Exchange 5.5 organization consists of two different sites,
> each in its own NT 4.0 domain, so call that siteA and siteB in domainA
> and domainB for simplicity.  They share a common GAL between them as
> you would expect and all is well.
>
> I've just installed the first Exchange 2003 server in a Windows Server
> 2003 AD domain (call this domainC) and placed the Exchange server into
> siteA.
>
> Trusts are in place between domainA and domainB (previously), between
> domainA and domainC (for the migration), but not yet between domainB
> and domainC.
>
> The problem that I see now is that GAL for users who have been migrated
> to the new Exchange 2003 Server is incomplete...i.e. it does not have
> any entries from siteB in it.
>
> Is this simply an issue of I don't have the trusts built betwen the NT
> 4 domainB and the new AD domainC?  Once those trusts are built, can I
> expect this issue to go away?
>
> Thanks,
> Will 


0
sheyia (112)
1/12/2005 7:05:13 AM
Yup, that was it.  

I actually did that right before I left last night and let it run...all
good now.  Not sure why I didn't think of that before hand...

Thanks,
Will :)




Sheyi Adenouga [MSFT] wrote:

> To make sure I understand...your Exchange 2003 users don't see the
> SiteB Exchange 55 users, correct?
> 
> Sounds like you haven't created an Recipient Agreement between SiteB
> and AD.  The Exdeploy tools that come with Ex2003 should help you get
> that sorted out.
> 
> Good luck.
0
1/12/2005 1:51:46 PM
Reply:

Similar Artilces:

Outlook 2003 Rules and Alerts Organiser
I have many rules for email processing butI find Outlook 2003 clumsy and cumbersome in trying to manage and organise these rules. Does anyone know if there is an addon product to do this? Cheers Ian M http://www.slipstick.com is a good place to start looking. --� Milly Staples [MVP - Outlook] Post all replies to the group to keep the discussion intact. All unsolicited mail sent to my personal account will be deleted without reading. After furious head scratching, Ian Mitchell asked: | I have many rules for email processing butI find Outlook 2003 clumsy | and cumbersome in trying to m...

Exchange 2K7 and ACL on GALs
Hi, I'm looking for a convenient way t set ACL on address list and GAL, seems that we can't do it via the GUI and didn't found the parameters to do it via PS. So I'm left with ADSIEDIT but wonder if there isn't a better way. Thanks for your help -- Daniel Falconetti ...

Archive sent items ONLY in OL 2003
I'm trying to setup some ssystems to archive sent items only, but when I turn it on for that folder, it turns on the default setting (which wants to delete things older than 2 months from any folder set to defaulot) then I have to go to every other folder and set the archive policy to "OFF" to avoid any other mail from being archived. Is there no way to set archival on one folder without setting it system wide?!?!?!? ...

Money 2003 #14
Recently, in the Portfolio Manager, 'Today's Total Change' for funds is not posting. All others OK. This is also affecting the "Change: $$$" at the bottom of the portfolio. No help on line. No QFEs for this version. Any ideas? -John ...

Publisher 2003 Printing Problem #4
I'm trying to create a booklet (catalog) in Publisher 2003 which I would like to print on 8.5 x11 paper and have each page be 5.5 x 8.5. I would like to be able to print this out so that I can just fold the pages in half and have them line up properly. I cannot print on 11 x 17 and do not want to shrink the size of the pages. Is there anyway to set it up so that pages do not have to be folded twice, just in half, and have it lay out properly....like a book? -- Suse Page setup, booklet... If your default stock is letter, then that is all you need to do. Do you have a duplex unit...

More Workflow issues
Hi Has anyone got a sales process stage to update the database? I have tried setting the description field of the opportunity, and appending to it, and setting a value in a custom added field. None of the above have worked, even when I have queried the SQL database directly to see the raw data. Any ideas? Thanks Gill ...

Issues with KB979909, 982168 & 982524
I'm having issues with the above 3 updates. I've attempted to install them numerous times but I keep being notified about them and when I access windows update they show as needing to be installed. However my history shows that they have been installed successfully at least 3 times each. KB979909 shows in Add/Remove programs but the others do not, however all have been logged as being successfully installed in ReportingEvents.log. I have tried all the steps included in KB910339 which has eventually led me here. Starting in Safe Mode seemed like a good plan apart from...

Multiple issues!!!!GRRRRR!
Hi All! So here is first issue. Little note in bottom right hand side of Outlook window frame says, for example"receiving 1 of 4 messages"...cool...but then I don't get 4, I will get less or none at all. I went to MS for their fix..it said to turn the filters off...yeah well, they were off, so I turned them on and then right back off again just incase it had become confused somewhere along the way. Still the same. Then I called my IP to see if it was an issue with them. Went through the whole rig-a-marole...nope, not them either...then on to F-Secure, they had me turn off all...

Error in Money 2003
I recently upgrade from 2002 to 2003 and now an error is appearing everytime I clink on a transaction. "This operation cannot be performed." I have to clink on it several time while adding and changing a transaction. I tried repairing the file and it is still doing it. Please Help. There are multiple repair methods. You don't say which you've tried. Read http://umpmfaq.info/faqdb.php?q=104. "Michele Harris" <anonymous@discussions.microsoft.com> wrote in message news:d8ca01c43a93$15fb97f0$a601280a@phx.gbl... > I recently upgrade from 2002 to 2003 an...

Public Folder Issues after PF Migrate
I used the PF Migrate utility to move all public folder replicas from our Exchange 2000 box (EXCH2K-01) to our Exchange 2003 box (EXCH2K3-01). I allowed 24 hours for replication. I then used the utility to delete these same public folders from EXCH2K-01. Again after allowing for replication, I then ran a report to confirm there were no more public folders on the Exchange 2000 box. I then shut down the server. Now there are a few users who cannot access public folders. When I look in Exchange System Manager, under EXCH2K-01 / First Storage Group / Public Folder Store / Logons, I can se...

Columns and Labels issues
My database is desjgned to collect test resuts in a lab. on each page, my report displays 4 sets of test results(tests displayed using a sub report). Now i have labels next to my sub report but are not bound to any specific field. My problem is that the minute i have more than 4 results, the labels only display on the first page. how can i set those labels on every page printed regardless of what info is printed. similar to a header or footer, but on the left side of the page. your help will be much appreciated. Thanks Mark Mark, If you put your labels in the details section rather tha...

Formatting issue.
I have a customized template in Word 2003 with a few different options, e.g. margins. We then use Office Automation to open a new document using that template, suck in html that is all formatted with tables, and save as a Word 2003 document. I have upgraded to Word 2007. I copied normal.dot from above and saved as a Word 2007 template. We do the same process as above and the document has more spacing in the tables than with Word 2003. A typial one page document is about 1 inch longer in 2007 than it was in 2003. I have made sure the 'Don't add space between paragr...

AutoArchive Issue with OL2007...
Hi, Using Exchange 2000, mailbox profile: If I right click a folder (deleted items) and set it to delete items older than 4 months and permanently delete them instead of moving them to a PST, it will not work when an autoarchive runs or you run file archive archive all folders according to their settings. It goes through them all, but doesn't purge any items. If I set the folders settings to move them to a PST, it also does not work. The only way it works if I do it manually, file, archive, archive this folder, set the date and let it do that folder. There is no permanent delet...

Using Exmerge from 5.5 to 2000
Hi I am looking at using Exmerge to move mailboxes from Exchange 5.5 on NT4 in domainA to Exchange 2000 on W2K in domainB there is only about 30 mailboxes. The NT domain is a bit of a mess and is in a DMZ outside our ISA server so I don't want to use the ADC. Doing a search for previous postings highlighted the fact that I would need to use the correct version of Exmerge. Where can I get the 5.5 version of Exmerge? Do I just use Exmerge 5.5 to export to pst, copy the files to the new server and then use Exmerge 2000 to import? TIA Andrew Please see the following link, it says where i...

IE8 Crashes on Sites That Use Flash
I keep getting a message from IE that says it's closing IE to protect my computer, and it only happens on sites that use Flash. When I try to download the Adobe Flash Player (which I thought I already had), that's when IE decides not to display the web page supposedly because of a malfunctioning or malicious add-on. Can anyone help? -- Thanks. See the Flash troubleshooting page: http://www.adobe.com/support/flashplayer/ Frank "communiverse" <communiverse@discussions.microsoft.com> wrote in message news:A01573ED-D605-42A3-AC9D-C574A9126C1B@micros...

GAL not updating
LogHi Everyone, I am running Exchange 2003 (small business server) with Exchange SP1. I deleted some accounts from Active Directory and created some new ones with Exchange mailboxes. None of the changes that I made show up in the GAL. The new boxes seem to work fine but I can not open them through my Outlook (I am Admin), it tells me that a mailbox of that name cannot be found. I tried manually adding them to the Offline Address List (since I am using Outlook 2003 in cache mode) but it does not find them there either. There are no errors in the Event Log to give me a clue. I have trie...

GetProcAddress issues
Tried to load dll file using "LoadLibrary" and used "GetProcAddress" to get the adderss of a specific function, "fnTestFun". It returned NULL, and "dependancy walker" (%microsoft-visual-studio-home%\Common \Tools\depends.exe) showed that the currupted function name (? fnTestFun@@YAHPAD000000000000PAVTestClass2@@@Z). Tried to use this, "? fnTestFun@@YAHPAD000000000000PAVTestClass2@@@Z" as function name it worked fine. what could be possible causes for this issue? Thanks in advance. On 15 Mar 2007 01:43:58 -0700, "v4vijayakumar" <...

restriction base invalid, error in VS.NET 2003 when loading schema
I started with the following error... ------------------------------------------------------- An error occured while loading the schema with TargetNamespace 'http://www.w3.org/2001/XMLSchema' referenced in this document. The value for the 'base' attribute is invalid - 'xsd:string' is an invalid value for the 'base' attribute. An error occured at the file:///C:Program Files/Microsoft Visual Studio .NET 2003 /Common7/Packages/Schemas/XML/xsdschema.xsd.(516,16). after trying to load this schema file: ------------------------------------------------------- (fr...

Payees Duplicated when Upgraded to 2003
The Payees that are set up as Epays were duplicated when I upgraded to Money 2003. How can I combine the Payees that were duplicated back into a single Payee? I have transactions in both Payees and the need to be combined. It won't let me move them. ...

CANNOT OPEN a publisher 2000 FILE in Publisher 2002 or 2003
I am very frustrated by the fact that I cannot open one of my file created in Publisher 2000 using my Publisher 2002 or 2003 versions. The file is converted by Publisher 2003 up to about 74% and then an error message comes up asking that I report the error message to Microsft - which I did. There is nothing wrong with the file as this because a problem only after I purchased the new versions. This is a very important document for me as I invested a lot of time creating it. Please advise as to how this could be fixed. Thanks! After managing to set up OE-QuoteFix on his new PC, Ed reads a messa...

ISSUE
Hello again, I am using the Issues template database in Access 2003. It's working really great, yet I'd like to add more reports to it...I see the Macro that's used, but I am drawing a blank on how to make the Macro attach itself to the reports that I'd like to add to the report listing that already came with the database....any suggestions??? Thanks Ransom Hi Ransom, the trick is to add the reports to the list of reports and don't do anything at all with the macro. To add a new report to the list: When you have the View Reports form open, --click Edit Report List -...

OWA, Outlook 2003, and Exchange 5.5 Outages
Need patch for this problem? Where can I get? ---- Problem 1 Perhaps the most common issue being reported by Exchange Administrators when dealing with Outlook 2003 and Exchange 5.5 cohabitation is the issue described in TechNet article 818709. One of the most useful and heavily used features in the Exchange feature-set is Outlook Web Access (OWA), or the ability to access an Exchange mailbox over a Web mail connection. According to Microsoft, when you use OWA to access a mailbox on a server running Exchange 5.5 and you are using a user account that was previously accessed from a cli...

Outlook 2003 Embedded pictures
Outlook 2003, SP 3, with all latest updates. Windows XP Pro with all latest updates. When I receive a message with pictures embedded in the body of the message, I can see the pictures OK. If I forward this message to others, my copy of the forwarded message shows the embedded pictures OK too. However, if I forward this message to myself (to get rid of all the extraneous From and To and subject lines), the copy of the sent message has all the embedded pictures, just like the original. HOWEVER, when I get receive the message I just forwarded to myself, the embedded pictures arrive a...

formula coping 5 consecutive cell triggered by a value from anoth.
...

Exchange 2003 Issue
I have an issue that I cannot figure out. I am upgrading to Exchange 2003. Being that I am not able to do the upgrade from the CD because the our Exchange 2000 was the Enteprise eedition and we purchased the standard edtion for Exchange 2003, I decided to backup the information store and use the Exmerge utility to convert the mailboxes to PST files Problem is this. I uninstalled Exchange 2000 completely. This means that not only did I run the update.exe /removeorg from the command promt, but I also went on the Microsoft website to find out what registry entries I had to remove. I also un...