I am looking for information regarding deployment of an
Exchange Cluster in a Blade configuration. Thanks Ken
First and formost, make sure your hardware is on the HCL. Support would
only be "best effort" if it is not.
The following link will get you to the Deploying Microsoft Exchange 2000
Exchange 2003 Clusters cna be found in the Exchange 2003 Deploymnet Guide at
the following location:
In Outlook 2007:
1. Draft folder is visible but contents are not! (i can see the number of
message but not the messages)
2. Notes folder is NOT visible. (funny thing is that if i make a shortuct i
can see it)
In BOTH cases all is OK in OWA.
1) Perhaps you have a filter set to your view?
Verify that the view has been set to "Sent To" and reset it if necessary.
2) Does it show when you switch to the Notes Navigation or use the Folder
List Navigation to see all your folders ...Chart Errors
I have created a chart using 100% stacked columns. I want my values to show
the % each value contributes to a total. I.E. Overage, Current Collections
and Total Goal. The chart looks great; however, whenever I update my current
collections, the percentage doesn't calculate correctly. The chart seems to
be adding all values together to come up with the percentage need and the
goal doesn't seem to shrink. Any ideas?
Are Overage, Current collections and Total Goal stacked on top of one
another. If so, the % calculated would be based on the total of all three.
"Scacci...Cannot Unistall IMF Exchange 2003
I am having troubling applying Exchange 2003 Server SP 2. The error message
says I need to uninstall Intelligent Message Filtering BEFORE I install SP2.
I try to uninstall IMF and it will not uninstall.
The error message says "There is a problem with this Windows Installer
Package. A program run as part of the setup did not finish as expected.
Please contact your support personnel or package vendor. .....A Fatal error
I've also reinstalled the original install of IMF and still the same issues.
Reinstall IM...System Job error in Advanced Find
We are running MS CRM 4.0 Enterprise and we have upgraded to Hotfix Rollup
12 recently and we have noticed an issue in Advanced Find.
From Advanced Find every time you choose "System Jobs" from the 'Look for'
dropdown an error dialog is displayed with the message:
"An error has occurred. Try this action again...."
This is the standard error dlg_error.aspx.
If you access System Jobs from the main area under the Settings pane this
error does not appear.
We have 4 separate CRM environments (each with Rollup 12) and this is
happening in three of them.
Any ...Intermittant connection with Outlook 2003 and Exchange 2005
I have a problem affecting just one of our clients. About a third of the
messages get through, and about 2 thirds are dropped. We use Exchange
Server 2005 and Outlook 2003. The client side is using Microsoft
Frontbridge. If we send mail using Outlook Web Access or Evolution, all
of the mail is delivered.
Can someone tell me why only some of our messages sent via Outlook get
delivered while all messages delivered by OWA or Evolution get through?
...restore public folder to Exchange 2003 server from backup copy of the Exchange 5.5 server
Recently a user deleted a folder witnin the Public Folders on the
Exchange 2003 server. When I looked at a backup copy from the backup
tape, I could not find the pub1.edb file in the MDBDATA folder. I am
using Backup Exec. 8.6. Prior to this, I migrated to Exchange 2003
from Exchage 5.5 and changed my Exchange 2003 into Native Mode. I made
a copy of the Exchange 5.5 pub1.edb onto an external hard drive,with
its utility. Can i use this copy of the pub1.edb for the existing
pub1.edb I have for the Public Folders? If so, what are the steps
that I would need to do in performing this act...Pulling email from exchange server with an exchange account
I was running a 2003 exchange server but got tired of dealing with the
spam, ndr and the rest. I had setup the accounts for everyone including
myself. Basically I had in outlook my account setup as an exchange
account. Now that our corporate mail is hosted elsewhere I need to pull
off my email from my exchange account. I have created POP accounts
while using the the IP address for pop and smtp so everything is local
when asking to pull. I have also went through an archive trying to get
messages to save on my PC so I can then use as PST file, with no
success. I have also tried looking f...Unable to get TextBoxes property of Worksheet Class Error
I have posted elsewhere to try and get resolution on my issue and decided to
ask for help here as well.
I have an issue that is driving me crazy. I have a workbook that has
multiple sheets and some of these sheets have Textboxes (from the drawing
tool) on the sheet with standard naming (i.e. TextBox 1, TextBox 2, etc.)
I have a button that executes code that takes and builds an external file
with the data from the worksheets, including the TextBoxes. During that
process I am checking to see if those worksheets with TextBoxes have anything
entered before attempting to grab the...Exchange / POP3
How does one go about having exchange POP email for users whom have 3rd
party POP 3 server accounts?
I have an exchange server setup here and I would like to get email to my
users from a 3rd party POP3 account. I would normally just change MX records
and point to my exchange server and have the email go right to the exchange
server, but this ISP will not allow me to receive inbound SMTP.
So as it stands; I can send email from my exchange server using my internet
connection with out any issues, it's the receiving part that has me hung up,
and if I co...Calling unmanaged code from managed MFC worker thread
I have an existing VC 6 MFC application which communicates asynchronly with
a VC 2005 managed code dll.
I use an unmanaged base class with virtual functions to access methods in
the MFC application.
Furthermore, I use a pointer to an unmanaged function to jump back into the
The managed part is basically a remoting enhancement which asynchronly
initiates a call from the remoting thread to the MFC application. The
information is collected within the main thread of the MFC application. The
managed code dll is invoked via a function pointer. From the managed code
addition...Sending Error Message
When I press the Send/Receive button, it appears that Outlook 2003 is trying to send 3 or 4 files even though there are no files to be sent. I then get the following error message which quickly disappears: Task 'pop.xxxxxxx.com.au' - Sending reported error (0x80040201): 'Unknown Error 0x80040201'. Outlook seems to work OK otherwise. I do not have Outlook Express installed. I have vet, zonealarm, adaware, spybot etc and can't find any viruses, trojans etc.
...virus attacks against Exchange
I've noticed over the last month that every Sunday morning at 5:45 a.m. our
sends a CPU warning. When I check the app event log for that date/time
there is a *huge* amount of
virus detections by our real time virus monitor . What exactly is going on
here and how
might I prevent this from continuing to happen ?
sounds like you have an "on demand" scan of your mailbox store scheduled for
this time frame...have you checked? look in the configuration of your
"chrism" <chris@no_spam> wrote in message
news:uZcfIwKpEHA.33...Exchange 2003 #5
How many clients/users will Exchange 2003 support? I have heard that it can support up to 10,000 users. Is this correct?
"James" <firstname.lastname@example.org> wrote:
>How many clients/users will Exchange 2003 support? I have heard that it can support up to 10,000 users. Is this correct?
How long is a piece of string?
Define the hardware platform. Define your expectations for
perdformance. Define your backup/restore hardware and strategy. Define
your expectations for restore/recovery time.
The number of mailboxes on a server is meanngless without some
context. wi...Microsoft Exchange #3
When setting up Outlook I clicked on Microsoft Exhange instead of POP3. Now
it is stuck wanting Microsoft Exchange Server. How do I get rid of this so I
can sign up under POP3. I deleted Office 2003 and reinstalled and it is still
Control Panel->Mail Icon. Create a new Profile using the Profiles =
button and configure it to use your POP3 account. Then go back and =
delete the Exchange account from the Accounts button.
Milly Staples [MVP - Outlook]
Post all replies to the group to keep the discussion intact. All
unsolicited mail sent to my personal acco...Exchange-Integrated Help Desk Software
Can anyone provide any good help-desk softawre that integrates well with
Exchange? Preferably open-source (i.e. FREE :) )
On Wed, 23 Aug 2006 15:04:03 -0700, circulent
>Can anyone provide any good help-desk softawre that integrates well with
>Exchange? Preferably open-source (i.e. FREE :) )
You get what you pay for.
MOM and its future SCOM 2007 and the helpdesk features of that 2007
product are certainly good products to name just one.
As an actionpack subscriber we get MOM Workgroup Edition. does that have...exchange 5.5 to exchange 2000
Hi, we are considering to migrate our single windows NT domain to
windows 2000, then to upgrade the current exchange 5.5 into Exchange
2000 which is currently in the windows 2000 member server within this
I know I have one option:
* upgrade the PDC to windows 2000 domain control and then exchange
5.5 to exchange 2000. what is the risk here?
* my question here is: where could I find the detail steps?
I am thinking if I have another option which is:
* Migrate the PDC to windows 2000 domain.
* Install a saparated exchange 2000 server
* move the mail box from exch...Problems between two Exchange Servers
At my Company we are planning to replace an existing exchange 2000 server
(EXS1 NT Pack 4.0 Exchange Sp3) with a new server called (EXS2 NT Pack 4, No
Service Pack). So we configured an additional server and added to our
primary Site. We moved a few mailboxes to the new server and seem to get
outside mail but I see that all the mail sent locally is not been delivered
and is stuck in the Queue that is pointing to the new server by name
exs2.mydomain.com. I tried to force a connection but it doesnt want send
Is there more than one routing group?
reg...Third request for help with Payables Error message!
Ok I have posted this for the third time with no response! I need help
to know if there is any kind of issue on the back end of our
environment. If someone could help it would be greatly appreciated!
We are currently running GP 10 SP1 and apparently since version 8 (we
did not upgrade to 9) there has been the following error message
launching a transaction out of Smartlist, when we go to inquiry for
AP documents, and drill down of PMTRX & PMCHK from the JE inquiry
Unhandeled Script Exception:
Index 0 array of 'PM_Transaction_Inquiry_Fill' Script terminated
We ran a ...Exchange ignores Outlooks text only setting
we are running excg5.5 sp4, on nt4.0 sp6. we are using office 98, and 2000.
The problem we are having is Exchange ignores Outlooks text only setting and
send both text and html mime encoded messages.
On Mon, 23 Aug 2004 05:55:01 -0700, "mikee"
>we are running excg5.5 sp4, on nt4.0 sp6. we are using office 98, and 2000.
>The problem we are having is Exchange ignores Outlooks text only setting and
>send both text and html mime encoded messages.
What ticks have you got on the Internet Mail tab > Advanced Options of
the I...GLOBALROOT Error on Exchange 2003
I setup protection for Exchange Server 2003 SP2 running on Win2K3 SP2. There
are four information storage groups. I am protecting the server using DPM
2010 RC. All of the prerequisite steps were performed successfully. Two of
the info storage groups (the small ones - 30GB) backup successfully. The two
large info storage groups (125GB each) fail with the following alert message:
DPM encountered an error while performing an operation for
(ServerName)\Support.edb on ServerName.domain.com (ID 2033 Detai...antigen on exchange #2
This question regarding antigen software recently we installed in our
Every thing has gone fine, when I test adding some words to filters are not
working. By default filtering has in enabled the State.
What I configuration I have to do.
I did not change any configurations.
Thanks in advance,
...CE6: Hive Registry on XIP ROM & RAM File System
The CE6 BSP from supplier supports ROM-Only file system, XIP, Hive-based
Registry. It works fine on my board.
But we are reuiqred to support ROM and RAM file system, XIP, Hive-based
After some modifications, ROM and RAM file system is working now. All
folders are in RAM, except Windows folder. But I have two problems, don't
know how to solve them:
1. After system boots up, only My Device icon and Recyle Bin icon appears on
desktop. IE icon, Word Pad icon, and other MS shortcut icons are not
displayed. Program folder is empty. I remember I can see all the wince...domain added then removed from exchange but emails still route to exchange ?
Was wondering if someone can explain this:
added external domainA to accepted domains
added domainA mail address to users mailbox
(mx was not changed)
sent email from mailbox/account/domainB (hosted on exchange server) to
domainA , arrived in users mailbox on exchange as expected
removed domainA from accepted domains
removed domainA email address from users mailbox
to domainA , arrived in users mailbox on exchange as expected, arrived in
users mailbox, this was not expected.
When using Outlook (domainB exchange accounts) and entering the email
address user@domainA.co...Exchange Calendar Item vs. Outlook problem
Our Exchange 5.5 (SP4) server has what appears to be a corrupt calendar item
for January 20, 2004. Those people who have this recurring(?) calendar item
experience an Outlook lock up (CPU 100% running process outlook.exe) when
accessing their calendar for that date and when syncing for offline Outlook
use. This effects Outlook versions 2000 and 2002. Because the item can not
be accessed from an Outlook client it can not be deleted. Is there a way to
delete recurring calendar items from a specific date in the private data
store? Is there an Outlook patch that prevents the CPU utilization p...