Exchange ClusterI am looking for information regarding deployment of an
Exchange Cluster in a Blade configuration. Thanks Ken
First and formost, make sure your hardware is on the HCL. Support would
only be "best effort" if it is not.
The following link will get you to the Deploying Microsoft Exchange 2000
Server Clusters:
http://www.microsoft.com/technet/prodtechnol/exchange/2000/library/default.mspx
Exchange 2003 Clusters cna be found in the Exchange 2003 Deploymnet Guide at
the following location:
http://www.microsoft.com/exchange/prodtechnol/exchange/2003/library/default.mspx
--
Nicholas ...
ExchangeIn Outlook 2007:
1. Draft folder is visible but contents are not! (i can see the number of
message but not the messages)
2. Notes folder is NOT visible. (funny thing is that if i make a shortuct i
can see it)
In BOTH cases all is OK in OWA.
Evan Camilleri
http://www.holistic.com.mt
http://www.dotnetmushroom.com
http://www.mobilesalesman.com
1) Perhaps you have a filter set to your view?
Verify that the view has been set to "Sent To" and reset it if necessary.
2) Does it show when you switch to the Notes Navigation or use the Folder
List Navigation to see all your folders ...
Cannot Unistall IMF Exchange 2003Hello,
I am having troubling applying Exchange 2003 Server SP 2. The error message
says I need to uninstall Intelligent Message Filtering BEFORE I install SP2.
I try to uninstall IMF and it will not uninstall.
The error message says "There is a problem with this Windows Installer
Package. A program run as part of the setup did not finish as expected.
Please contact your support personnel or package vendor. .....A Fatal error
during installation."
I've also reinstalled the original install of IMF and still the same issues.
Any thoughts?
Thanks,
Randy Hughes
Reinstall IM...
Intermittant connection with Outlook 2003 and Exchange 2005I have a problem affecting just one of our clients. About a third of the
messages get through, and about 2 thirds are dropped. We use Exchange
Server 2005 and Outlook 2003. The client side is using Microsoft
Frontbridge. If we send mail using Outlook Web Access or Evolution, all
of the mail is delivered.
Can someone tell me why only some of our messages sent via Outlook get
delivered while all messages delivered by OWA or Evolution get through?
Thanks,
Rick
...
restore public folder to Exchange 2003 server from backup copy of the Exchange 5.5 serverHi,
Recently a user deleted a folder witnin the Public Folders on the
Exchange 2003 server. When I looked at a backup copy from the backup
tape, I could not find the pub1.edb file in the MDBDATA folder. I am
using Backup Exec. 8.6. Prior to this, I migrated to Exchange 2003
from Exchage 5.5 and changed my Exchange 2003 into Native Mode. I made
a copy of the Exchange 5.5 pub1.edb onto an external hard drive,with
its utility. Can i use this copy of the pub1.edb for the existing
pub1.edb I have for the Public Folders? If so, what are the steps
that I would need to do in performing this act...
Pulling email from exchange server with an exchange accountHello,
I was running a 2003 exchange server but got tired of dealing with the
spam, ndr and the rest. I had setup the accounts for everyone including
myself. Basically I had in outlook my account setup as an exchange
account. Now that our corporate mail is hosted elsewhere I need to pull
off my email from my exchange account. I have created POP accounts
while using the the IP address for pop and smtp so everything is local
when asking to pull. I have also went through an archive trying to get
messages to save on my PC so I can then use as PST file, with no
success. I have also tried looking f...
Exchange / POP3In short:
How does one go about having exchange POP email for users whom have 3rd
party POP 3 server accounts?
Expanded Reason:
I have an exchange server setup here and I would like to get email to my
users from a 3rd party POP3 account. I would normally just change MX records
and point to my exchange server and have the email go right to the exchange
server, but this ISP will not allow me to receive inbound SMTP.
So as it stands; I can send email from my exchange server using my internet
connection with out any issues, it's the receiving part that has me hung up,
and if I co...
virus attacks against ExchangeI've noticed over the last month that every Sunday morning at 5:45 a.m. our
Exchange server
sends a CPU warning. When I check the app event log for that date/time
there is a *huge* amount of
virus detections by our real time virus monitor . What exactly is going on
here and how
might I prevent this from continuing to happen ?
thanks
sounds like you have an "on demand" scan of your mailbox store scheduled for
this time frame...have you checked? look in the configuration of your
Exchange AV...
"chrism" <chris@no_spam> wrote in message
news:uZcfIwKpEHA.33...
Exchange 2003 #5How many clients/users will Exchange 2003 support? I have heard that it can support up to 10,000 users. Is this correct?
"James" <anonymous@discussions.microsoft.com> wrote:
>How many clients/users will Exchange 2003 support? I have heard that it can support up to 10,000 users. Is this correct?
How long is a piece of string?
Define the hardware platform. Define your expectations for
perdformance. Define your backup/restore hardware and strategy. Define
your expectations for restore/recovery time.
The number of mailboxes on a server is meanngless without some
context. wi...
Microsoft Exchange #3When setting up Outlook I clicked on Microsoft Exhange instead of POP3. Now
it is stuck wanting Microsoft Exchange Server. How do I get rid of this so I
can sign up under POP3. I deleted Office 2003 and reinstalled and it is still
there.
Thank You
Maggi
Control Panel->Mail Icon. Create a new Profile using the Profiles =
button and configure it to use your POP3 account. Then go back and =
delete the Exchange account from the Accounts button.
--=81
Milly Staples [MVP - Outlook]
Post all replies to the group to keep the discussion intact. All
unsolicited mail sent to my personal acco...
Exchange-Integrated Help Desk SoftwareCan anyone provide any good help-desk softawre that integrates well with
Exchange? Preferably open-source (i.e. FREE :) )
Thanks
On Wed, 23 Aug 2006 15:04:03 -0700, circulent
<circulent@discussions.microsoft.com> wrote:
>Can anyone provide any good help-desk softawre that integrates well with
>Exchange? Preferably open-source (i.e. FREE :) )
>
>Thanks
You get what you pay for.
MOM and its future SCOM 2007 and the helpdesk features of that 2007
product are certainly good products to name just one.
As an actionpack subscriber we get MOM Workgroup Edition. does that have...
recover mails from .bak file in ms outlook
Dear All
I had some problem with MS Outlook (2003). I found that there was a
problem with .PST file
I tried to repair it with SCANPST.EXE. It repaired my OUTLOOK.PST file
but many mails are missing.
I had taken bakup of .PST file into .BAK file.
Please guide me how can in recover my mails from .BAK file
Thanks
Vimal
--
vimalrupera
If you have a backup copy of your pst and you recover it, then you may well
find the problem is also recovered.
What format is your pst file? - If your pst is open in Outlook, select
properties of the personal folders, Advanced, what is sh...
exchange 5.5 to exchange 2000Hi, we are considering to migrate our single windows NT domain to
windows 2000, then to upgrade the current exchange 5.5 into Exchange
2000 which is currently in the windows 2000 member server within this
NT domain.
I know I have one option:
* upgrade the PDC to windows 2000 domain control and then exchange
5.5 to exchange 2000. what is the risk here?
* my question here is: where could I find the detail steps?
I am thinking if I have another option which is:
* Migrate the PDC to windows 2000 domain.
* Install a saparated exchange 2000 server
* move the mail box from exch...
Problems between two Exchange ServersAt my Company we are planning to replace an existing exchange 2000 server
(EXS1 NT Pack 4.0 Exchange Sp3) with a new server called (EXS2 NT Pack 4, No
Service Pack). So we configured an additional server and added to our
primary Site. We moved a few mailboxes to the new server and seem to get
outside mail but I see that all the mail sent locally is not been delivered
and is stuck in the Queue that is pointing to the new server by name
exs2.mydomain.com. I tried to force a connection but it doesnt want send
the mail.
Please help
Gary Vidal
Is there more than one routing group?
--
reg...
Exchange ignores Outlooks text only settingwe are running excg5.5 sp4, on nt4.0 sp6. we are using office 98, and 2000.
The problem we are having is Exchange ignores Outlooks text only setting and
send both text and html mime encoded messages.
On Mon, 23 Aug 2004 05:55:01 -0700, "mikee"
<mikee@discussions.microsoft.com> wrote:
>we are running excg5.5 sp4, on nt4.0 sp6. we are using office 98, and 2000.
>The problem we are having is Exchange ignores Outlooks text only setting and
>send both text and html mime encoded messages.
What ticks have you got on the Internet Mail tab > Advanced Options of
the I...
GLOBALROOT Error on Exchange 2003I setup protection for Exchange Server 2003 SP2 running on Win2K3 SP2. There
are four information storage groups. I am protecting the server using DPM
2010 RC. All of the prerequisite steps were performed successfully. Two of
the info storage groups (the small ones - 30GB) backup successfully. The two
large info storage groups (125GB each) fail with the following alert message:
DPM encountered an error while performing an operation for
\\?\GLOBALROOT\Device\HarddiskVolumeShadowCopy38\Exchsvr\MdbData\support\Support
(ServerName)\Support.edb on ServerName.domain.com (ID 2033 Detai...
CE6: Hive Registry on XIP ROM & RAM File SystemHi,
The CE6 BSP from supplier supports ROM-Only file system, XIP, Hive-based
Registry. It works fine on my board.
But we are reuiqred to support ROM and RAM file system, XIP, Hive-based
Registry.
After some modifications, ROM and RAM file system is working now. All
folders are in RAM, except Windows folder. But I have two problems, don't
know how to solve them:
1. After system boots up, only My Device icon and Recyle Bin icon appears on
desktop. IE icon, Word Pad icon, and other MS shortcut icons are not
displayed. Program folder is empty. I remember I can see all the wince...
Reading Access Files on PDAI have ordered a PDA a HP Ipaq H2210, and I want to transfer a database I
have on my PC to my Ipaq. On my PC I use MS Access 2002. Access is not
available on the Ipaq so I was wondering if any knew of any software that I
can get that I will run on the Ipaq and can read/write Access 2002 files.
Does anyone know of any such software that I can use? Ideally it should be
freeware.
I hope you can help.
Thanks!!
I do not know of any software that will run on the Ipaq that could
read/write Access 2002 files. Perhaps, you may want to return the IPaq and
find a PDA that does supports Access.
&qu...
antigen on exchange #2HI All,
This question regarding antigen software recently we installed in our
exchange server.
Every thing has gone fine, when I test adding some words to filters are not
working. By default filtering has in enabled the State.
What I configuration I have to do.
I did not change any configurations.
Thanks in advance,
Shiva.
...
domain added then removed from exchange but emails still route to exchange ?Hi,
Was wondering if someone can explain this:
added external domainA to accepted domains
added domainA mail address to users mailbox
(mx was not changed)
sent email from mailbox/account/domainB (hosted on exchange server) to
domainA , arrived in users mailbox on exchange as expected
removed domainA from accepted domains
removed domainA email address from users mailbox
to domainA , arrived in users mailbox on exchange as expected, arrived in
users mailbox, this was not expected.
When using Outlook (domainB exchange accounts) and entering the email
address user@domainA.co...
Exchange Calendar Item vs. Outlook problemOur Exchange 5.5 (SP4) server has what appears to be a corrupt calendar item
for January 20, 2004. Those people who have this recurring(?) calendar item
experience an Outlook lock up (CPU 100% running process outlook.exe) when
accessing their calendar for that date and when syncing for offline Outlook
use. This effects Outlook versions 2000 and 2002. Because the item can not
be accessed from an Outlook client it can not be deleted. Is there a way to
delete recurring calendar items from a specific date in the private data
store? Is there an Outlook patch that prevents the CPU utilization p...
Does MS DPM team look at compeititors product to design dpm 2010 ?Not a technical questions ...
Does DPM team look at compeitiors product eg Netbackup or Veritas or Acronis
to design dpm 2010 efficiently ?
I am sure the forum wants to know ...
I would hope so in an effort to take the best features from every product and
put them into one.
"IT Staff" wrote:
> Not a technical questions ...
>
> Does DPM team look at compeitiors product eg Netbackup or Veritas or Acronis
> to design dpm 2010 efficiently ?
>
> I am sure the forum wants to know ...
>
>
> .
>
...
Cannot Kill Excel FileHi,
Below is the Code that i am working:
Dim objXL As Object, objWkb As Object, objSht As Object
Set objXL = CreateObject("Excel.Application")
Set objWkb = objXL.Workbooks.Open([FileName])
Set objSht = objWkb.Worksheets("Sheet1")
With objSht
'Code to modify the excel file Info
End With
objWkb.SaveAs strTempFile 'Save the Excel file as a Tempoary to prevent
overwriting the orginial file
objWkb.Close savechanges:=False
objXL.Quit
Set qdf = CurrentDb.CreateQueryDef("TempQuery", "SELECT T1.* FROM [Excel 8.
0;HDR=YES;IMEX=1;Data...
Exchange 2007 RSG and Isinteg
We are running exchange 2007 on a windows 2008 server, both are fully
patched. We backup with Backup Exec 12.5, again fully patched. All of our
backups finish without any problems.
Our problem; when i restore a database backup to a RSG and then try to
restore a mailbox i recieve errors telling me that the maxium number of
corrupted messages has been reached. i tried moving the limit up, but i have
to move the limit up to 5000 before it works and then i only get a few
emails not the complete contents of the mailbox.
After a bit of research i found a few similar cases. These were resolv...
Restore Exchange...help!!!!My 'broken' Exchange2003\win2003 server (not DC) had it's partitions
labelled...'system' for C:\, 'Exchange' for D: and 'logs' for E:. How
important is it I label the new Exchange server drives the same before the
restore (I am not sure of the EXACT names!!!)
Also my log files were all on drive D:\ (the only things on that drive) do I
need to restore them too...they may not be exactly in sync with the other
data being restored?
Finally, what part of my 'Exchsvr' folder do I need to restore from backup?
I think that may be a few days older tha...