I am looking for information regarding deployment of an
Exchange Cluster in a Blade configuration. Thanks Ken
First and formost, make sure your hardware is on the HCL. Support would
only be "best effort" if it is not.
The following link will get you to the Deploying Microsoft Exchange 2000
Exchange 2003 Clusters cna be found in the Exchange 2003 Deploymnet Guide at
the following location:
Nicholas ...DPM 2007 SP1 , Server 2008 R2 , Hyper-V
When creating a protection group, I select my hyper-v server but can only
see the dpmdb , no guests
My DPM is installed on the hyper-V server
What am I doing wrong ?
Before making the hyper-v server a dpm server, i could see the vm's from my
other DPM 2007 SP1 server
By default, you can only backup DPMDB from the DPM server. This is by
design. Here is the info:
You can enable the local data protection using the following cmdlet:
Set-DPMGlobalProperty -DPMServerName servername -A...Page Numbers in Publisher 2000
I am completing our Employee Handbook and do not want page umbers on my first
9 pages. Page 10 is the first one I want numbered beginning with page #1.
Instead my page #10 is labeled page #1. Can anyone help and let me know if
this is possible with this software? Thanks.
> I am completing our Employee Handbook and do not want page numbers on my first 9 pages. Page 10 is the first one I want numbered beginning with page #1.
> Instead my page #10 is labeled page #10. Can anyone help and let me know if
> this is possibl...Exchange
In Outlook 2007:
1. Draft folder is visible but contents are not! (i can see the number of
message but not the messages)
2. Notes folder is NOT visible. (funny thing is that if i make a shortuct i
can see it)
In BOTH cases all is OK in OWA.
1) Perhaps you have a filter set to your view?
Verify that the view has been set to "Sent To" and reset it if necessary.
2) Does it show when you switch to the Notes Navigation or use the Folder
List Navigation to see all your folders ...Cannot Unistall IMF Exchange 2003
I am having troubling applying Exchange 2003 Server SP 2. The error message
says I need to uninstall Intelligent Message Filtering BEFORE I install SP2.
I try to uninstall IMF and it will not uninstall.
The error message says "There is a problem with this Windows Installer
Package. A program run as part of the setup did not finish as expected.
Please contact your support personnel or package vendor. .....A Fatal error
I've also reinstalled the original install of IMF and still the same issues.
Reinstall IM...restore public folder to Exchange 2003 server from backup copy of the Exchange 5.5 server
Recently a user deleted a folder witnin the Public Folders on the
Exchange 2003 server. When I looked at a backup copy from the backup
tape, I could not find the pub1.edb file in the MDBDATA folder. I am
using Backup Exec. 8.6. Prior to this, I migrated to Exchange 2003
from Exchage 5.5 and changed my Exchange 2003 into Native Mode. I made
a copy of the Exchange 5.5 pub1.edb onto an external hard drive,with
its utility. Can i use this copy of the pub1.edb for the existing
pub1.edb I have for the Public Folders? If so, what are the steps
that I would need to do in performing this act...Intermittant connection with Outlook 2003 and Exchange 2005
I have a problem affecting just one of our clients. About a third of the
messages get through, and about 2 thirds are dropped. We use Exchange
Server 2005 and Outlook 2003. The client side is using Microsoft
Frontbridge. If we send mail using Outlook Web Access or Evolution, all
of the mail is delivered.
Can someone tell me why only some of our messages sent via Outlook get
delivered while all messages delivered by OWA or Evolution get through?
...Pulling email from exchange server with an exchange account
I was running a 2003 exchange server but got tired of dealing with the
spam, ndr and the rest. I had setup the accounts for everyone including
myself. Basically I had in outlook my account setup as an exchange
account. Now that our corporate mail is hosted elsewhere I need to pull
off my email from my exchange account. I have created POP accounts
while using the the IP address for pop and smtp so everything is local
when asking to pull. I have also went through an archive trying to get
messages to save on my PC so I can then use as PST file, with no
success. I have also tried looking f...hyperlinking to an item in Global Address List
I have figured out how to hyperlink (html) to an item in my contact
This works great.
Now I would like to be able to issue a command to open a specific
contact from the Global Address List. It is possible that the Global
Address List has some folder name like GAL so that a command like
could be issued. Does anyone know how to refer to the Global Address
List by its folder name or to do what I am asking?
This can't be done, but you can add the GAL entry to your contact folder and
then do what you know. Is that good en...Exchange / POP3
How does one go about having exchange POP email for users whom have 3rd
party POP 3 server accounts?
I have an exchange server setup here and I would like to get email to my
users from a 3rd party POP3 account. I would normally just change MX records
and point to my exchange server and have the email go right to the exchange
server, but this ISP will not allow me to receive inbound SMTP.
So as it stands; I can send email from my exchange server using my internet
connection with out any issues, it's the receiving part that has me hung up,
and if I co...virus attacks against Exchange
I've noticed over the last month that every Sunday morning at 5:45 a.m. our
sends a CPU warning. When I check the app event log for that date/time
there is a *huge* amount of
virus detections by our real time virus monitor . What exactly is going on
here and how
might I prevent this from continuing to happen ?
sounds like you have an "on demand" scan of your mailbox store scheduled for
this time frame...have you checked? look in the configuration of your
"chrism" <chris@no_spam> wrote in message
news:uZcfIwKpEHA.33...Lost contact list 01-02-10
Having transferred to WLM from Windows Mail I was pleased to see the contacts
already listed in the lower lefthand side as they used to do in Outlook
Express. However, on clicking a 'down arrow' the list disappeared. I can of
course get the contacts via the icon at the bottom or via the 'GO' button but
how do I get the list back as before please?
WLMail does not display the contact list in the lower left corner.
It is easier to start typing a name or address and select from the list.
This has the advantage of including other email addresses besides the
defaul...Exchange 2003 #5
How many clients/users will Exchange 2003 support? I have heard that it can support up to 10,000 users. Is this correct?
"James" <firstname.lastname@example.org> wrote:
>How many clients/users will Exchange 2003 support? I have heard that it can support up to 10,000 users. Is this correct?
How long is a piece of string?
Define the hardware platform. Define your expectations for
perdformance. Define your backup/restore hardware and strategy. Define
your expectations for restore/recovery time.
The number of mailboxes on a server is meanngless without some
context. wi...Open Subform in a New Window using a command button
I have a form with a subform which does exactly what I need. However, I want
to someway change the subform to a command button so when you click the
command button, it will open the subform using the same filter.
My form is frmPatent and the subform is sfRelated. The Link Child Field is
RelatedMtr and the Link Master Fields is Matter.
Can anyone assist me.
Place a button on the form and try this in VBA:
docmd.openform "subformname", acnormal,,"RelatedMtr= '" & me.matter & "'"
replace the subformname with your own subfo...Microsoft Exchange #3
When setting up Outlook I clicked on Microsoft Exhange instead of POP3. Now
it is stuck wanting Microsoft Exchange Server. How do I get rid of this so I
can sign up under POP3. I deleted Office 2003 and reinstalled and it is still
Control Panel->Mail Icon. Create a new Profile using the Profiles =
button and configure it to use your POP3 account. Then go back and =
delete the Exchange account from the Accounts button.
Milly Staples [MVP - Outlook]
Post all replies to the group to keep the discussion intact. All
unsolicited mail sent to my personal acco...Exchange-Integrated Help Desk Software
Can anyone provide any good help-desk softawre that integrates well with
Exchange? Preferably open-source (i.e. FREE :) )
On Wed, 23 Aug 2006 15:04:03 -0700, circulent
>Can anyone provide any good help-desk softawre that integrates well with
>Exchange? Preferably open-source (i.e. FREE :) )
You get what you pay for.
MOM and its future SCOM 2007 and the helpdesk features of that 2007
product are certainly good products to name just one.
As an actionpack subscriber we get MOM Workgroup Edition. does that have...exchange 5.5 to exchange 2000
Hi, we are considering to migrate our single windows NT domain to
windows 2000, then to upgrade the current exchange 5.5 into Exchange
2000 which is currently in the windows 2000 member server within this
I know I have one option:
* upgrade the PDC to windows 2000 domain control and then exchange
5.5 to exchange 2000. what is the risk here?
* my question here is: where could I find the detail steps?
I am thinking if I have another option which is:
* Migrate the PDC to windows 2000 domain.
* Install a saparated exchange 2000 server
* move the mail box from exch...open report
Is it possible to make a label visible during the OpenReport command? I have
the following commands:
If option 1 is selected -->
DoCmd.OpenReport stDocName, acPreview, , "M1Ass1Comment='Fail M1Ass1'"
If option 2 is selected ->
DoCmd.OpenReport stDocName, acPreview, , "M1Ass2Comment='Fail M1Ass2'" ,
However, I would like a different label on the report to be visible depending
on the selection. Is On Load the only way to achieve that?
Message posted via AccessMonster.com
http://www.accessmonster.com/U...recover mails from .bak file in ms outlook
I had some problem with MS Outlook (2003). I found that there was a
problem with .PST file
I tried to repair it with SCANPST.EXE. It repaired my OUTLOOK.PST file
but many mails are missing.
I had taken bakup of .PST file into .BAK file.
Please guide me how can in recover my mails from .BAK file
If you have a backup copy of your pst and you recover it, then you may well
find the problem is also recovered.
What format is your pst file? - If your pst is open in Outlook, select
properties of the personal folders, Advanced, what is sh...SQL Server 2008
I realize that these newsgroups are mostly for technical discussions. So,
if it's more appropriate to point me to another site for answers to the
questions that I'm about to ask, then please do so.
I just learned that there is going to be a SQL Server 2008. I am a
certified DBA (MCITP) for SQL Server 2005. Will there be an exam upgrade
path from 2005 to 2008? Does anyone out there have any certification
information for 2008, even though 2008 is not out yet? Will the SQL Server
2005 MCITP certification expire anytime soon?
More importantly, will there be compatibility ...Problems between two Exchange Servers
At my Company we are planning to replace an existing exchange 2000 server
(EXS1 NT Pack 4.0 Exchange Sp3) with a new server called (EXS2 NT Pack 4, No
Service Pack). So we configured an additional server and added to our
primary Site. We moved a few mailboxes to the new server and seem to get
outside mail but I see that all the mail sent locally is not been delivered
and is stuck in the Queue that is pointing to the new server by name
exs2.mydomain.com. I tried to force a connection but it doesnt want send
Is there more than one routing group?
reg...Exchange ignores Outlooks text only setting
we are running excg5.5 sp4, on nt4.0 sp6. we are using office 98, and 2000.
The problem we are having is Exchange ignores Outlooks text only setting and
send both text and html mime encoded messages.
On Mon, 23 Aug 2004 05:55:01 -0700, "mikee"
>we are running excg5.5 sp4, on nt4.0 sp6. we are using office 98, and 2000.
>The problem we are having is Exchange ignores Outlooks text only setting and
>send both text and html mime encoded messages.
What ticks have you got on the Internet Mail tab > Advanced Options of
the I...GLOBALROOT Error on Exchange 2003
I setup protection for Exchange Server 2003 SP2 running on Win2K3 SP2. There
are four information storage groups. I am protecting the server using DPM
2010 RC. All of the prerequisite steps were performed successfully. Two of
the info storage groups (the small ones - 30GB) backup successfully. The two
large info storage groups (125GB each) fail with the following alert message:
DPM encountered an error while performing an operation for
(ServerName)\Support.edb on ServerName.domain.com (ID 2033 Detai...Date Button in Header (Excel 2000)
Is there a way to change the format of the date button in the header? I get
12/11/04 and would like December 11, 2004.
I bet you're writing about File|page setup|Header/footer tab and clicking that
date button to insert the current date (you get this: &[Date] in the header
If yes, you could type anything you want (a static date, though). Or you could
use a macro that sets the header whenever you print/print preview.
I recorded a macro when I changed the header. I got this code (after deleting
lots of stuff I didn't care about):
With ActiveSheet...antigen on exchange #2
This question regarding antigen software recently we installed in our
Every thing has gone fine, when I test adding some words to filters are not
working. By default filtering has in enabled the State.
What I configuration I have to do.
I did not change any configurations.
Thanks in advance,