Inbound Messages Are Sitting in the 'inbound awaiting delivery' qu
I was wondering if anyone out there has seen this before. We are running a
mixed Exchange 5.5 and E2K3 messaging environment. The Exchange 5.5 box is a
bridgehead server. I have noticed that in the last 4 days, messages sit in
the 'inbound awaiting delivery' queue of the Internet Mail Service
(Connector) on the 5.5 box for about 15 minutes, before they are delivered to
the respective mailboxes. For the most part the recipients are on th same
LAN. I have followed Q193862, but that has not solved my problem. Any ideas
Do you have antispam on E2K3?
I need to set up a double click event that will create a new email and
include certain fields from the record I'm currently in and use the
email address from another table/form (the 2 tables/forms are linked
by an ID#). I also want it to include a generic message in the body
of each email (like a signature). How do I do that?
On Sep 13, 5:08 pm, serviceen...@gmail.com wrote:
> I need to set up a double click event that will create a new email and
> include certain fields from the record I'm currently in and use the
> email address from another table/form (the 2 tables/form...extract email address from message
I get email messages forwarded to me from an information desk.
I have to reply to the original sender of the message.
Is there a way to scan the message and find the original sender's email
address and put that in the To: field?
david <firstname.lastname@example.org> wrote:
> I get email messages forwarded to me from an information desk.
> I have to reply to the original sender of the message.
> Is there a way to scan the message and find the original sender's
> email address and put that in the To: field?
Not unless the forwarder includes it.
Brian Tillman...error using word as the email editor (office 200,W2K)
I keep receiving the following error -
"Microsoft word is set to be your e-mail editor. However, word is
unavailable, not installed, or is not the same version as Outlook. The
outlook email editor will be used instead. An OLE registration error
occurred. The progrma is not correctly installed. Run setup again for the
I have tried detect and repair; reinstalling - the error persists. Any
...Adding proper X-Received: headers for inbound messages?
In Exchange 2003 (running on SBS2003) with the Outlook client, there doesn't
seem to be any way to tell which email address was used to route a given
message into my mailbox unless this appears in a literal To/Cc header (which
hardcore SMTP people like me consider the "body" of the message).
I'm on staff at a network consultancy supporting a small number of very
large customers, and each one has its own support alias that expands to a
distribution list including the proper engineers, and normally it's no
problem because the visible To: header tells us.
...Collecting data through email using VBA
I know that the "Create Email" tool in order to collect data through email but I want to do it automatically.
My database form includes VBA code in order to send automate emails. I'd like to make this email "special" in order to receive the replay into access and use the answer email.
I'd be grateful if someone could help me with the VBA code.
Thanks! This capability is included in Access 2007, if you are using the .accdb file
format, although you still need to initiate the process (ie. it is not fully
What version of Access are you using?
...Maximum email in outbox
If I automate sending email through code, how many emails can the outbox
take? Will it crash or something when I send about 5000 emails.
Currently what I am doing is setting up distribution lists and sending them
Thanks in advance
Richard <email@example.com> wrote:
> If I automate sending email through code, how many emails can the
> outbox take? Will it crash or something when I send about 5000 emails.
...Report results in Email
I have a Query with Email addresses and another Query with account numbers
and dollar amounts. Does anyone know how to insert the data from the Query
with account numbers so that it goes to the individual email address? Thanks
in advance for your help.
> I have a Query with Email addresses and another Query with account numbers
> and dollar amounts. Does anyone know how to insert the data from the Query
> with account numbers so that it goes to the individual email address? Thanks
> in advance for your help.
-----BEGIN PGP SIGNED MESSAGE-----
Hash...Change Default Email Layout
In a new email in Outlook if you click View you get a drop down menu with
Normal, Web Layout & Print Layout. The default is Web Layout. I know that
you can just select a different layout for the current message but how do
you change the default to one of the other layouts for all new messages? I
can't seem to find the setting. Thanks for any ideas
This is with Word as the e-mail editor, correct? What version of
Word/Outlook are you using?
MVP - Outlook
*** Messages sent to my e-mail address will NOT be answered -- please
reply only to the newsgroup t...How to Make Subject Line Empty in Email Template
When using an email template for a signature, we are forced to enter
something into the subject line. The problem is that this automatically
overwrites our existing subject line's contents. Any way around this?
There's no way to avoid this. Until there is a fix for this, you can just
place a single blank space in the subject line so at least you aren't sending
people emails with "My Signature" as the subject if you forget to type your
subject line after composing the email...
Matt Wittemann, CRM MVP
"circulent"...email warning message
Hi I am getting
A program is automatically trying to acesss email adresses
you have stored in Outlook
during a session login from vb6 code using cdo 1.21 dll
when I attempt to get some data from a task folder.
I would like to disable this , is this only possible from
the admin side or is this something I can stop
...disable auto-creation of email hyperlink?
When I enter a string of text that contains the @ symbol, Excel automatically turns it into a hyperlink to my email program. Is there a way to disable this?
depends on your Excel version:
Excel 2003: Goto 'Tools - Autocorrect - Auto format as you type' and
disable this option
Before that (though as I don't use Excel 2002 maybe the tip for Excel
2003 will work):
a) Use the following macro to remove hyperlinks of a chosen selection
(after your data entry)
b) Without macro:
- Type the number 1 in a blank cell an...TLS Inbound
I am trying to implement TLS between my organization and two others for
encryption of health-related email content. I set up a routing group with an
address space of the remote domain and enabled TLS on that routing group. I
also added a valid Verisign-issued certificate to the SMTP server. Now
messages that I send to the remote domain are TLS-enabled, but when they send
messages to us, they get the following errors:
6043:3:2:06282005 07:09:08:Connecting to MX <xxx.xxx.org> ....
6043:3:2:06282005 07:09:08:Connecting to A <xxx.xxx.xxx.xxx> ....
6043:3:2:06282005 07:09:08:Reply...NOTIFICATION INBOUND MAIL
my Admin mailbox is filled up by a lot of these messages:
NOTIFICATION: INBOUND MAIL FAILURE
What setting should I change so that I do not get these messages inside the
Is it possible insert on all exchange users a text on email body?
not digital company them
Maurizio Conti <MaurizioConti@discussions.microsoft.com> typed:
> Is it possible insert on all exchange users a text on email body?
> not digital company them
> Maurizio Conti
I'm not sure what you mean by "digital company" - do you mean, you want a
corporate disclaimer to appear on your Internet mail?
Yes , i resolve with GFI Freeware.
Exist an exchange 2000 built-in ?
"Lanwench [...How do I Import a distribution list from an email attachment
I am trying to save a distribution list from an email that someone sent me.
I don't know how to do this without having to type in all of the contacts
individually and then manually creating my own distribution list. Is there
an easy way to do this?
What version of Outlook are you using?
What type of attachment is this? Excel document? Just a list of addresses in
the body of the message?
"golfgal" <firstname.lastname@example.org> wrote in message
>I am trying to save a distributio...How do I set up a macro to forward an Excel Spreadsheet via email
I have an Excel worksheet that is sent out to a Distrubution list every
evening. How can I set up a "button" on the spreadsheet to automatically
forward the worksheet as an attachment to an e-mail with a "constant" group
...setting up email
I use MSN email...but i want to set it up so i can check it through outlook....i have no idea where to start....help me please!
Can you be any more vague??? A little more detail will
probably get you better results. What version of Outlook
do you have? Is it setup already with any existing email
I take a wild guess: If you have Outlook 2002 or known
as Office XP and you do have email already setup meaning
you can open Outlook and get to your Calendar and
contacts and even another email inbox. Open Outlook, Go
to Tools, Email Accounts, Choose New, Then HTTP, the rest
sh...CRM3: Internal email OK but not external email
Just had a clean CRM v3 installation. I followed implementation guide
without any errors. Exchange router has been installed OK.
I can send out emails for contacts within the company but not external
It looks like emails sent to exteranl addresses did not reach exchange server.
Where do I need to check?
When you installed, what did you choose as the SMTP settings? The default
settings use the SMTP service on the CRM server and that may not be
configured to route msgs outside. You can run a "Repair" setup and it will
allow you to change these se...Moving Inbound mail from 5.5 to 2003 and inbound routing for multiple domains
I have Exchange 5.5 and 2003 setup in my organization. I have two sites that
are only 5.5 and one that is 5.5/2003. The two sites have MANY additional
domain names that receive email in all sites and all internet email flows
through the 5.5/2003 site
I moved our inbound email (from the internet) from our 5.5 server to
Exchange 2003 and all seemed fine. Our inbound email on exchange 5.5 has a
routing tab where we allow many domains as inbound to our organization.
These email address exist as primary and secondary for mailboxes in each
site. Most users have 2-3 email address but in diffe...Elimating original senders email address when forwarding email
When Using outlook XP is there an option to ensure when
forwarding an email it does not send the original senders
Wnhe forwarding a message I want everything except the
original senders email address to be sent to the person I
am forwarding the email to.
Any help would be appreciated
...Using Word as the email editor is greyed out
I'm using Office 2000 and I installed Outlook 2002 from
the 'hp iPAQ Pocket PC companion CD" and now under Tools,
Options, Mail Format button, "Use MS Word to edit..."
and "Use MS Word to read email messages..." is greyed out.
Anyone know how to make these options available.
You can't. In order to use Word as the email editor, the versions of Word
and Outlook must be the same.
Author, Special Edition Using Microsoft Outlook 2003
***Please post all replies to the newsgroups***
"Heather&q...sending multiple emails
I've designed an email newsletter using Publisher 2003 and I've also used the
"email" feature on the toolbar to send it to a recipient. Is there a way that
I can send it to multiple addresses without each recipient seeing the mailing
list. I know there are services that handle such things but I'd like to do it
directly from Publisher.
Bcc is shorthand for Blind carbon copy. If you add a recipient's name to this box in
a mail message, a copy of the message is sent to that recipient, and the recipient's
name is not visible to other recipients of...I can't send emails
I don't have problems with receiving mails, but after sending mails I get the
"554 5.7.0 Reject, id=16822-12 - Message refused, this message appears to be
In the menu options/preference/junkmail, I unticked the box about
postmarking message, I entered the mail addresses on the Safe Senders List
and Safe Recipients List and altered the preferences in my AntiVirus Program.
I didn't help. What else can I do?
Is this happeing on all emails you try to send?
This is not an Outlook problem. It appears that your IP address, or a range
of IP addres...Not receiving email minet32.dll error
Running Outlook97 in Windows ME. Not receiving email.
Error messsage: MAPISP32 caused an error in MINET32.DLL
MAPISP will now close.
Tried replacing MINET32.DLL - no luck, same error message.
Tried replacing MAPISP32 and re-installing Outlook 97.
Still no luck, same error message. Suggestions?