Best Way ?
Looking for some information. With Outlook you can have all your
contacts...address, email address, yada, yada, yada. Can I use this
information in to say mail merge with Word and email a letter to the ppl
with email addresses? Or is this better done with a Access?
The reason I ask is that we want to deliver an email to all our clients with
the latest promotions. And want it to be a bit more automated?
Any information or pointers in the right direction would be appreciated.
Have a good one,
You can use either Access or Outlook as the data source for a ma...Exchange Server 2007 Hub Transport errors
Good Morning everyone,
I have an issue with trying to submit mail. When I draft a message and press
send in OWA or via MAPI (Outlook 2003 & Outlook 2007), the message ends up in
the DRAFTS folder. (NOT THE SENT ITEMS or the OUTBOX).
When troubleshooting via the ExTA there is a reference to the
MSExchangeTransport service not starting. When I attempt to start the
service, it will start; however, it stops "on it's own" without any
intervention. When I check the Event Viewer this is what I see:
Event ID: 17002
Descri...Is there a way to color code Outlook Contact File Folder Labels?
Is there a way to color code Outlook Contact File Folder Labels?
Diane Poremsky [MVP - Outlook]
Author, Teach Yourself Outlook 2003 in 24 Hours
Coauthor, OneNote 2003 for Windows (Visual QuickStart Guide)
Author, Google and Other Search Engines (Visual QuickStart Guide)
Outlook Tips: http://www.outlook-tips.net/
Outlook & Exchange Solutions Center: http://www.slipstick.com
Join OneNote Tips mailing list: http://www.onenote-tips.net/
"isailhbca" <email@example.com> wrote in message
>...Exchange 2000 upgrade
I currently run an Exchange 2000 standard on a Windows 2000 standard server
in a Windows 2000 mixed mode domain. The current Exchange server is also a
DC and a GC server. I am preparing to upgrade to Exchange 2003 Ent with
Windows 2003 standard server on a new box. This new box will have 4 GB RAM
and 6 - 72 GB drives. We have about 75 mailboxes. I'm looking for advices
on the following information:
_ Step-by-Step upgrade instructions
_ My Exchange server is in Mixed mode, is it necessary to change it to
Native mode before I upgrade
_ Does it matter if I move the mailboxes be...A way to create sub-categories?
I want to group contacts by category and then a sub-category for easy
viewing. Apart from creating a new field for sub-category is there a way of
doing this? Outlook doesn't seem to support sub-categories.
Author - Special Edition Using Microsoft Office Outlook 2003
Lead Author - Access 2003 VBA Programmer's Reference
Author - Absolute Beginner's Guide to Microsoft OneNote 2003
"Casebase" <firstname.lastname@example.org> wrote in message
news:%23rx5a...Integration Manager #2
I was wondering if utilizing the Integration Manager with Great Plains is the proper way to do this - let me explain.
I can see where getting information from the outside world into GP is easy. I need to export AP check data for a positive pay initiative for our local bank. This information would need to be in a text file for the bank.
Is Integration Manager the proper tool? If not, would you recommend a better way? Thanks!
IM is the tool to use
"DJO2112" <DJO2112@discussions.microsoft.com> wrote in message
news:BAD608E0-B74C-4912-9A9B-C04B09FDB926@microsoft.com...signatures for exchange
I have 20 or so users on exchange and i want to create a company wide
signature format that the users can not change.name ,address and phone
number. Is there a way to set that up. Right now users are creating their own
and it is driving me nuts
Robert Sparnaaij [MVP-Outlook]
Coauthor, Configuring Microsoft Outlook 2003
Outlook FAQ, HowTo, Downloads, Add-Ins and more
Real World Questions, Real World Answers
"bigb" <bigb@discussio...is there a way to crop a corner out of a rectangular image in Visi
Using subtract on two shapes accomplishes what i want to do, but when the
first shape is a .gif image, it does not work.
No, the "boolean operations", as they're called, do not operate on foreign
objects like bitmaps and controls.
Visio has crop functionality for imported graphics, but it is only
You could draw a small white triangle and give it "no line". Then place it
over the corner of your bitmap.
Hope this helps,
"doug" <email@example.com> wrote in message
news:29D479A6-6099-4051-B7A0-1...Exchange 2003 and DPM2007
I use Exchange 2003 on server Windows 2003 32bit and DPM2007 on server
The replica of Storage group Storage Group on MyServer.MyDomain is
inconsistent with the protected data source. All protection activities for
data source will fail until the replica is synchronized with consistency
check. You can recover data from existing recovery points, but new recovery
points cannot be created until the replica is consistent.
For SharePoint farm, recovery points will continue getting created with the
databases that are consistent. To backup inconsistent databases, run...Exchange Global Rules
I have noticed that in Exchange 2003 OWA you can define rules that must
be stored in Exchange because when you connect to the exchange server
with Outlook the rules you defined in OWA are present. I am curious if
a method exists for defining these rules on a global scale.
An example of what I would like to do is as follows:
My users receive certain pre-filter messages with an auto tag added to
the subject line. Currently, some users have a local outlook rule that
filters these emails to a predetermined folder in their personal inbox.
In order for me to admin these I have to go to each users ...Page Numbering Management
Example: If you have a 6 page spreadsheet
Is there a way to change the order of page numbering. For instance, pages 1 to 4 will be numbered 1 to 4 (that's the easy part). Problem is: Pages 5 and 6 will have to be numbered 1 and 2
Is that possible, changing the order of page numbering?
Excel has a setting in page setup. (file>page setup>page>first page number),
set this with a number, eg 5 and it will start with a page number of 5
Microsoft MVP - Excel
"Ben" <anonymous@discussions....is there a way to change the time card repor format?
i'm using activereports in RMS to generate a custome timecard report. for my
timein and timeout colums, the datatype i have assigned to the columns is
vbDate. when I generate the report, the columns only show the date as
mm/dd/yyyy, they do not show the time of day piece for exactly when the
cashier punched in or out. is there any way to change the formatting of this
so that in the report the time shows up? for example, instead of showing
2/6/2005 in the time in column, it would show 2/5/2005 8:00:00 AM.
thanks in advance,
There is a timecard report on the Reports Library...Formula Does not work on excel 2003
This formula does not work in excel 2003. Does anyone know how to convert it
to the correct formula for excel 2003.
It works perfectly on my system with 2007. But when I put it on a system
with 2003 it returns nothing.
What it is supposed to do is pull data from a sheet name in the format
dd.mm.yy. Sometimes the sheet is not there so should return nothing or 0.
Your formula work...best way to deserialize xml
I'm at a quandry as to what's the best/fastest way to deserialize an
incoming xml stream?
I ran a small test on xmlserializer and on a small file it performed 10
times worse then when I used the XMLDocument and deserialized the values
myself. Is the xmlserializer really that slow?
I'm expecting a file about 1 MB in length and if it's that slow on a 2 K
file then I can't phantom how it's going to behave on a 1 MB file.
Should I just skip the xmlserializer and XML Dom and go straight to
xmlreader and do the deserialization myself?
This has been discussed a few times...Can You Count This Way?
I have some cells with note type data:
Is there a way to count every item between the commas?
Timothy Wright wrote:
> I have some cells with note type data:
> For ex:
> Is there a way to count every item between the commas?
On Wed, 19 May 2004 20:13:53 +0200, "Frank Kabel"
>=LEN(A1)-LEN(SUBSTITUTE(A1,&q...Want to backup Win2008 R2 Hyper-V Guest machine to DPM2007
[ Environment ]
DPM Server: Windows Server 2003 R2 SP2 x64
Hyper-V Physical machine: Windows Server 2008 R2 x64
Hyper-V Guest machine: Windows Server 2003 R2 SP2 x86
[ Patches applied ]
[-- DPM Server --]
- WindowsServer2003 KB926140
- WindowsServer2003 KB934016
- WindowsServer2003 KB940349
- WindowsServer2003 KB967551
- WindowsServer2003 KB968447
- WindowsServer2003 KB969219
- DataProtectionManager2007- KB949779
- DataProtectionManager2007- KB954641
- DataProtectionManager2007- KB959605
- DataProtectionManager2007- KB961502
- DataProtectionManager2007- KB963102
- DataProtec...Exchange MTA Stacks
I run Exchange 2k on Windows Server 2k. MTA stacks crashed
yesterday. I cannot get it to start. No specific error.
Whe usig the exchange snap in. I get message saying LDAP
Provider 80072020. Any Suggestions
There must be some kind of error in the application or system log. Check
those and send us the event ids:
The events I get are Event ID 9175....OPenMsgStore.
The noteable error is Event ID 125 " A fatal error occured
reading a value from directory. NO MTA name was found.
>I run Exchange 2k on Windows Server 2k...Treasury Management Module
We are currently using GP 9.0 and are looking for a Treasury Management
Module to be integrated with GP.
We are a holding company and would like to manage our funds for our
subisdiary companies. We provide loans to our subsidiaries.
If there is any solution for this kind of business, please let me know. Even
if there is no integration with GP, we can still go for it.
If you are interested we can offer a custom solution as per your
requirements with GP Integration. Please contact me for more information.
ERP solutions Specialist
manic_m...Exchange 2003 Cluster issue
We're testing Exchange 2003 for implementation later this year and have
currently setup a test lab with the following:
Windows 2003 Standard Server (Global Catologue)
Compaq DL380 Cluster (2 node) - configured as member servers
Windows 2003 Enterprise
Exchange 2003 Enterprise SP1
The problem we have is that when we create a new user, it doesn't give the
option to create a mailbox.
Forestprep and Domainprep were both run on the Catologue Server to begin
Never seen this before so suggestions are greatly appreciated.
In the last exciting episode, "Jay" <p...Outlook 2003 Compatibility #2
Can Outlook 2003 be installed on a computer with Windows ME Operating
"Les" <firstname.lastname@example.org> wrote:
>Can Outlook 2003 be installed on a computer with Windows ME Operating
...Masquarade Exchange server HELP!
I'm testing an Exchange 2k3 installation.. The server was built using an
internal naming scheme as follows:
Server Name: blackwidow
Win Domain: trackit.apt
FQDN is then: blackwidow.trackit.apt
Now this server delievers mail for a completely different public DNS name:
webtrialz.net..... But when viewing the host header from a message that was
SENT by this exchange server, I see the actual FQDN in the "Message-ID"
field of the SMTP header.. I think this is causing some junk mail filters
to flag the mail as junk since it's not matching the public domain na...Is there a way to Sort data by color in Excel?
I am trying to sort data by color, is that possible?
"SRTUC" <SRTUC@discussions.microsoft.com> wrote in message
> I am trying to sort data by color, is that possible?
You're gonna need a User defined function to get the value of a color.
See Chip Pearson's site for a nice version:
Look for: Returning The ColorIndex Of A Cell
Then you could use that UDF in a separate colu...Fastest way to load an xml file into an array in .net
VS 2005 SP1 (C#, VB.NET)
I need the absolut fastest way of loading an xml-file of about 700KB into an
I need to load about 1500 of those xml-Files into arrays on startup of my
Therefore it needs to be as fast as possible.
Please also tell me if the xml structure can be improved.
the xml looks like:
<v y="1998" m="1" h="1">0.227777109151971</v>
<v y="1998" m="1" h="2">0.206573903224972</v>
<v y="1998" m="1"...Exchange and Outlook on different subnets
Exchange 2000 and Outlook 2000, 2002 and 2003. We recently separated a
portion of our office onto a different subnet, and these Outlook clients are
now separated from the Exchange server by a firewall. The firewall currently
(for troubleshooting purposes) has no rules restricting traffic between the
subnets. We find that on the remote subnet everything works fine, but when
Outlook is inactive, after a time "send/receive" doesn't work anymore. The
firewall logs show that the attempted connection is using an established
connection that the firewall has broken, most likely due to a ...Is there a convenient way to save data
Is there a convenient way to save dialog data so it remembers the users last
selection? I have a dialog based application that only has three user
variables all of which are ints. What is the best way to make theses
variables persistent for a given user on a given machine?
"Jeff B" <email@example.com> wrote in message
> Is there a convenient way to save dialog data so it remembers the users
> selection? I have a dialog based application that only has three user
> variables all of which are ints. What is the best w...