ADC upgrade to SP1

I have upgraded my Exchange server to SP1. When I tried to do my first
cross-administrative group move, I got an error message that such moves are
disabled until ADC is upgraded to SP1. When I ran the setup from the
SP1\ADC\i386 directory, there is no "upgrade" option available, only
Add/remove, reinstall and uninstall. How do you upgrade the ADC to SP1?


0
guppy413 (82)
6/7/2004 9:28:58 PM
exchange.admin 57650 articles. 1 followers. Follow

3 Replies
402 Views

Similar Articles

[PageSpeed] 42

before you can move mailboxes between admin groups, you must turn your organization into a native organization..
org -> properties -> native mode. make sure you dont have any 5.5 servers!!! if there are, i guess you already using ADC, and you have to stay in mixed mode until they are removed... you can't move mailboxes between admin groups while in mixed mode. by the way, press reinstall to upgrade the adc.
0
anonymous (74717)
6/7/2004 10:06:04 PM
You were right my man about "reinstall." Thanks

Not about the first point though. Cross-administrative group moves are a
feature of SP1. I agree that it is probably better to wait until native mode
(not as many profile and rules problems) but we may not be able to wait in
some cases.

"omer maydan" <anonymous@discussions.microsoft.com> wrote in message
news:5EC267D9-465D-4BEA-B6C3-64B604F8AB76@microsoft.com...
> before you can move mailboxes between admin groups, you must turn your
organization into a native organization...
> org -> properties -> native mode. make sure you dont have any 5.5
servers!!! if there are, i guess you already using ADC, and you have to stay
in mixed mode until they are removed... you can't move mailboxes between
admin groups while in mixed mode. by the way, press reinstall to upgrade the
adc.


0
guppy413 (82)
6/7/2004 10:14:21 PM
We re-installed over the top, now we move mailboxes cross-
ags.
Remember to backup you ADC server first.

>-----Original Message-----
>You were right my man about "reinstall." Thanks
>
>Not about the first point though. Cross-administrative 
group moves are a
>feature of SP1. I agree that it is probably better to 
wait until native mode
>(not as many profile and rules problems) but we may not 
be able to wait in
>some cases.
>
>"omer maydan" <anonymous@discussions.microsoft.com> wrote 
in message
>news:5EC267D9-465D-4BEA-B6C3-64B604F8AB76@microsoft.com...
>> before you can move mailboxes between admin groups, you 
must turn your
>organization into a native organization...
>> org -> properties -> native mode. make sure you dont 
have any 5.5
>servers!!! if there are, i guess you already using ADC, 
and you have to stay
>in mixed mode until they are removed... you can't move 
mailboxes between
>admin groups while in mixed mode. by the way, press 
reinstall to upgrade the
>adc.
>
>
>.
>
0
anonymous (74717)
6/7/2004 11:52:02 PM
Reply:

Similar Artilces:

Upgrade error with certain entities
After upgrading to CRM 4, we are seeing following errors with Lead and Account entities when we try add or edit any records for these entities. Has anyone found a solution? Microsoft CRM Unhandled Error Details: Server Error in '/' Application -------------------------------------------------------------------------------- CRM Parameter Filter - Invalid parameter 'address1_country_sgindex=0' in Request.Form on page /xyz/sfa/accts/edit.aspx The raw request was 'POST / xyz/sfa/accts/edit.aspx' called from http://crmdev:5555/Xyz/sfa/accts/edit.aspx. Description: An...

upgrade to ver 2
What is the step by step process to upgrade from RMS ver 1.3 TO 2. What sorts of issues should i expect. Hello. Merchants Consulting, LLC is a retail information technology specialist. They can help. Call 253-509-2110 and ask for Don. Thank you. "dexter" wrote: > What is the step by step process to upgrade from RMS ver 1.3 TO 2. What sorts > of issues should i expect. ...

Office 2004 Standard to Professional Step Upgrade?
I really want to upgrade from Office X to Office 2004 Professional, but Professional will be out no earlier than end of July and we all know how trustworthy advance ship dates are.... So I would love to immediately purchase Office 2004 Standard if I knew I could do a step upgrade to Office 2004 Professional (Or I would even pay for Office Professional now, get everything that is available now and get the VPC and any other Professional features when they come out). But it seems that neither of these are viable options. Seems very strange to penalize the premium customers willing to pay premiu...

Upgrading from SQL2000 to SQL2008
We are upgrading from SQL2000 to SQL2008 and moving to a new server. The problem is, we are going from GP9.0 to GP2010. Does anyone know the path we need to take to get there? I figure I have two options. One, upgrade from GP9.0 to GP10.0 on the old server (SQL2000) and then upgrade from GP10.00 to GP2010 on the new server (SQL2008). My second option would be to upgrade from SQL2000 to SQL2005 on the old server and then just go from GP9.0 to GP2010 on the new server. I am wondering what the path of least resistance would be? The other little bit of information is, there...

OEM publisher 2002 Sp1-2
I have the OEM version of Publisher 2002 and cannot find the Export as web page under File. Is there a way I can get that feature with a standalone disk? After managing to set up OE-QuoteFix on his new PC, Ed reads a message from Chicagogal <anonymous@discussions.microsoft.com>... > I have the OEM version of Publisher 2002 and cannot find the Export > as web page under File. Is there a way I can get that feature with a > standalone disk? The OEM version of Publisher is exactly the same as the release in every way but the license, so the standalone version will be no differen...

Upgrade of ADC with ADC SP1
I have a mixed 5.5 and 2003 exchange environment and am currently trying to upgrade the 2003 ADC connector with the version that ships with exchange 2003 SP1. There is no upgrade.exe only a setup.exe and no instructions. (very tardy Microsoft) when I run setup, I am asked; Add/remove Reinstall Remove all After searching the internet for two hours and finding nothing, I thought I would try Add/Remove and see what the next screen said. I took the defaults and pressed next and the setup, after a setup successful message I pressed finish. Thinking that the ADC was now upgraded I tried to...

Can't send to certain domains after upgrading Exchange to SP1
Hey guys, I'm having a problem with Exchange after I installed SP1. Exchange resides on a 2003 SP1 server. After I upgraded Exchange to SP1, I can not send to hotmail.com, msn.com, microsoft.com and a few other domains. I searched the web, found other users had similiar issues, but there wasn't a solution posted. Has anyone else run across this? If so, what do you do to fix the issue. I have added an external DNS address under the Default Virtual Server because it was blank and tried to force a connection to the domains I can't send to, but that hasn't fixed the issue. Any inpu...

Cannot update to SP1 12.1.0
Version: 2008 Operating System: Mac OS X 10.5 (Leopard) Processor: Intel I have tried a couple times but it gets stuck everytime it gets to "Running AutoUpdate Installer Script". I left my computer on for a whole night but the progress bar didnt move at all. What is the problem? On 5/30/09 7:14 PM, "jonathan102@officeformac.com" <jonathan102@officeformac.com> wrote: > I have tried a couple times but it gets stuck everytime it gets to "Running > AutoUpdate Installer Script". I left my computer on for a whole night but the > progress bar didnt mov...

Problem upgrading
I trying to migrate from 3.0 to 4.0 and i got this error and i have no idea what is the problem any one can help me please this the end of the where i got the message log 17:32:47|Verbose| Retrieving information from database Provider=SQLOLEDB;Data Source=SHAREPOINT;Initial Catalog=Continex_MSCRM;Integrated Security=SSPI ... 17:32:47| Info| Query row count: 0 17:32:47|Warning| Check CrmV3CustomizationUnpublishedValidator : Warning: El programa de instalación ha detectado personalizaciones en el sistema actual que no han sido publicadas. Si continua, estas personalizaciones se per...

Upgrading
Hi everyone, Is it possible to upgrade Microsoft CRM Standard to Professional without reinstalling? Thanks! Yes, all it takes is new license keys. "Bill Gibbs" <gtest@edurotech.com> wrote in message news:1ab6915.0310171208.1df6a11@posting.google.com... Hi everyone, Is it possible to upgrade Microsoft CRM Standard to Professional without reinstalling? Thanks! Yes, it is possible. remove the old one first then add in the new license. >-----Original Message----- >Hi everyone, > >Is it possible to upgrade Microsoft CRM Standard to Professional without >...

HOW to remove ADC?
I had upgraded my exchange 5.5 using ADC. After the upgradion i have deleteled the exchange 5.5 accaount from my active directory i dont have the backup of my active directory now i cant remove the ADC or install the new exchange 2003 because its asking for old 5.5 exchange. is there any way by using ADSI edit tool. Please help me. Thanks Manoj. ...

upgrade to enter new password
I have screwed up my password. Can I install a later version of Money and use my backup file without entering my old password. It sounds possible after reading article Microsoft Knowledge Base Article - 318843. In microsoft.public.money, gary fritz wrote: >I have screwed up my password. Can I install a later >version of Money and use my backup file without entering >my old password. It sounds possible after reading article >Microsoft Knowledge Base Article - 318843. No. Trying to open a newer file with an older program will give a bogus indication that the problem is the...

SP2 upgrade problem...
Hi all, I bit the bullet this morning and installed SP2. I had an error halfway through the install... "Setup failed whie installing sub-component SMTP Service with error code 0xc103798a" I cant find any useful information (new SP - i know:/). The installation finished, and i dont see any problems. Everything seems to be working fine, but errors are of course bad! If anyone has any ideas im all ears (eyes). On Fri, 21 Oct 2005, Michael Varre wrote: > Hi all, I bit the bullet this morning and installed SP2. I had an error > halfway through the install... What, SP2...

Upgrading to OL 2002 from 2000
I installed OL2002 on a machine. I had my e-mail setup on another machine with OL2K. I saved the PST file, cause in the past that's all I needed to move e-mail. I also exported the e-mails and address book. I thought I had to do was move the old PST file to the location of the new PST that should have been created when I first set up OL2002. I do a search and can not find such a PST file. Can some one give me some direction how to get the old e-mails into OL2002? Thanks for any help you can provide. If you're using Windows 2000 or XP, you'll need to search in hidden and s...

CRM 1.2 to 3 Upgrade Problem / Fix?
We're having problems updating CRM 1.2 to 3.0. We think this is due to us moving from the US version of CRM 1.0 to the UK version of 1.2 and importing our schema changes - at the time, this lead to some functionality problems in CRM which we were given a fix for that involved editing the language code in the XML export and then reimporting the customisations. This fixed our issues and made 1.2 work correctly but we are wondering if this may be part of the problem we're having upgrading now to 3.0 We've found a document which suggests removing all customisations before upg...

DoCmd.DoMenuItem not working after upgrade.
I recently updated a database from Access 97 to Access 2002. I suspect in the past that it was upgraded from Access 2.0 to 97. One of the buttons doesn't work anymore, and has the following code in the OnClick event: DoCmd.DoMenuItem A_FORMBAR, A_EDITMENU, 10, , A_MENU_VER20 Where could I find a list of what these old version DoMenuItem commands were trying to do, so I can change it to the appropriate DoCmd.RunCommand statement? I have no idea what item 10 of the Edit menu in version 2.0 was... Thanks! What is it supposed to be doing? There's probably a more direct me...

ADC upgrade to SP1
I have upgraded my Exchange server to SP1. When I tried to do my first cross-administrative group move, I got an error message that such moves are disabled until ADC is upgraded to SP1. When I ran the setup from the SP1\ADC\i386 directory, there is no "upgrade" option available, only Add/remove, reinstall and uninstall. How do you upgrade the ADC to SP1? before you can move mailboxes between admin groups, you must turn your organization into a native organization.. org -> properties -> native mode. make sure you dont have any 5.5 servers!!! if there are, i guess you already ...

Exchange Server 2003 Enterprise SP1 backups with Ntbackup
Backing up first storage group to a file with Windows Server 2003 SP1 Ntbackup. Viewing the backup log indicates that backup of (server name)\microsoft information store\first storage group successfully backed up over 3Gb. Checking inside "isbackup.bkf" through Ntbackup's Restore tab shows no files to restore. The Information Store structure is there but no data that can be seen by Ntbackup. Is this normal and if so how would I use this backup to restore any data I may need? Thanks, Sam Goucher On Wed, 1 Feb 2006 19:41:27 -0800, "samgoucher" <samgoucher@...

Upgrade #2
My company are currently running Great Plains 8 and we are trying to decide wether to upgrade to version 9 or 10. I am looking for a version comparison document which looks at teh two versions. does anyone know if one exists? Thanks Fliehigh On Customer Source in Documentation you should find a features chart for V10 and V9. -- Richard L. Whaley Author / Consultant / MVP Documentation for Software Users Get our Free Tips and Tricks Newsletter and check out our books at http://www.AccoladePublications.com "Fliehigh" wrote: > My company are currently running Great Plains...

Uh ho, upgrade problems!
Hello all, I am VERY new to the world of Microsoft Dynamics RMS and have been thrown to the wolves so to speak. The company that hired me has put me in charge of installing and overseeing the upgrade of the 1.3 RMS to 2.0. I have done 2 of our 3 stores without a hitch, But the 3rd and final computer is giving me quite the headache. During the initial installation of 2.0 on this computer it gave me a "The previous version can not be uninstalled at this time" error message and would stop there. I did get support and found that if i used the windows installer repair utility t...

Installing WINDOWS 2003 SP1 and Exchange SP1
I have just inherited an Exchange 2003 enviorment with 1 2003 OWA frontend server and 4 Exchange 2003 backend server, not clustered but all part of the same farm. None of them have WINDOWS 2003 SP1 or Exchange SP1 installed. What is the best way to proceed to get these service packs installed. I read I need to update the frontend first, but what happens to the backend servers if I do them one at a time. DOWNTIME is an issue so any information about how long exchange sp 1 takes would be helpful. KB's are nice too. (i know W2003 sp1 takes a little time) no comment is too beneath m...

Dexterity error after upgrade when selecting vendor
We recently upgraded to Version 8.0.0.69. Our main site is working fine, but a branch office employee gets an error message when selecting a vendor. I have a screen shots of the error and version info. All other functions of the program are fine. Since this is my first time supporting this product, I'm having a hard time running this down. Thanks for your help! John Hi What is the error message? Do you have a Var to log a support call with? Regards James "John" <John@discussions.microsoft.com> wrote in message news:5558E29D-051A-4937-9961-6281C53F56EA@micro...

News: Mac BU sweetens Office 2008 upgrade deal (Updated)
Microsoft has modified its special offer for potential Mac Office users. Those who are just dying for a copy of Office now but are waiting for the January release of Office 2008 can now buy any version of Office 2004 for Mac and upgrade to 2008 Special Media Edition for the cost of shipping. That's $6.99 in the US or $10 in Canada-I guess Microsoft hasn't heard yet that the US dollar is valued below the Canadian dollar now. But how is this different from the previous offer? In September, the "free" upgrade to 2008 was for an equivalent version of Office. So, for exampl...

ADC in Mfg
Hi, How can I make ADC (Automated Data Collection) read from a csv file instead of a device? Actually our machines have a dedicated Oracle DB, which collects the required info about every machine & Labor, how can I make ADC in GP read from a file or db instead of reading from a device? Thanks. AMH. ...

Should I UPGRADE to Office 2004?
I am still using MS Office 98 on my OS 10.4.9. It works... However I do have a few gripes with Word 98, and one is that I cant send faxes natively anymore (as I could in OS 9), and must always convert my docs to PS, and then to pdf in the finder. Also the screen estate must always be at 125% to see anything on my 12 inch iBook. I am happy with Excel and Power Point 98, but then again I barley use these apps. Tell me the pro's and the cons of the upgrade and if I should do it. If I do it, I will buy it used from amazon.com or ebay. I wont buy it brand new. Thanks, John -- ...