VC++6 LNK1112 Error
i m trying to compile n build a program using VC++ 6. I keep getting a error :
*fatal error LNK1112: module machine type "IA64" conflicts with target
machine type "IX86"*
i think its hav something to do wif my library or my project setting. I had
try change the "/machine:" option to either IA64 or IX86, no luck. Any1 hav
I m using DirectX 9.0 SDK (April 2005), n Microsoft Platform SDK for Windows
Server 2003 SP1.
any help will be really appreciated !!!
Yep. Sounds like a valid error message. You are trying to link a module compiled for the
Itan...RFR Interface Errors HELP!
Help! I keep getting the following errors on our Exchange 2k3 server.
It's running on a Win2k3 DC that is also a Global Catalog server. It's
been in this configuration since Exchange 2k3 was released. Suddenly,
I'm getting these odd errors:
Event Type: Error
Event Source: MSExchangeSA
Event Category: RFR Interface
Event ID: 9143
Time: 7:15:17 AM
Referral Interface cannot contact any Global Catalog that supports the
NSPI Service. Clients making RFR requests will fail to connect until a
Global Catalog becomes av...What error does is suggest?
What is the Error?
=SUMPRODUCT(-(INDIRECT(A$7)=$S10),-(INDIRECT(A$7 & ".dates")=$I8)) return
A$7 refer to to a value on that cell, which is also the name of the
spreadsheet. i.e A$7 = Orginal
$S10 is a six digits number.
(A$7 & ".dates") = Original.dates which is a Named that refer to a column
also in spreadsheet "Original"
$i8 is a date value.
You're not specifying any cells in that first expression. Maybe something like:
=SUMPRODUCT(--(INDIRECT(A$7&"!A1:A10")=$S10),--(INDIRECT(A$7 & ".dates")=$I8)...Buffer Overflow Error
I can not get on my system because of a buffer overflow error titled "lsass.
Is there something I can do without having to re-image my hard drive and lose
all my data?
The Local Security Authority Service is a critical Windows component. What
happened to cause this problem? Can you access your system at all? You
should post this in the Windows Admin newsgroup.
"Confuses" <u20196@uwe> wrote in message news:5de894e67636a@uwe...
>I can not get on my system because of a buffer overflow error titled
> ...Publisher 2003 Banner Printing error
I just purchased Publisher 2003 and want to print some banners, but the print
is different to what is on my moniter screen. When I had Pulisher 2002,
everything was fine, but with the Publisher 2003 in my system, the second I
click the print button, what I see on my monitor suddenly enlarges way beyond
the top and bottom of the page, resulting in a print I cannot use. Can
someone out there please help me with this error?
Have you actually printed the banner? What does it look like in print preview?
You might want to look into an updated printer driver. Go to the manufacturer's
web ...Error code 80070424 02-02-10
I can't update windows, can't validate windows, can't download from
microsoft, Tried all the possable setting adj. I could find within IE
tools/Internet options/security/custom level... My O.S. is vista home basic
that came with my acer laptop. Active x seems to be the problem more than
likely cause I think would be a virus that got to activex. I did try some
differant tools even found a scanner repair tool on a microsoft site, it did
find the errors but when it connected back to the site for repair it had a
connect error and failed. just like everthing on the microso...Error Message: RPC Server is unavailable. Win32 c00706ba
Since a couple of days I get an error message within the System Manager MMC
of Exchange 2003 SP2 if I try to open the database property tab of a
mailboxstore from my desktop.
This is very strange because if I try to open the same tab from the Exchange
Server directly everthing works fine.
SP2 is installed on both - server and desktop.
Does anybody has got a hint for a solution or even an explanation for that?!
Take a look at the following MS KB:
The symptoms are a little similar and the error is the same, and I suspect
the problem...ROLLBACK on error
I would like that on error, the rollback of transaction is executed.
But I don't wont to check @@error after each INSERT or some other
statement. Is it possible to check it only at the end of the
Otherwise I'll have hundreds of IF statetements to check after each
insert or similar.
In this example the first and last record remain in the table.
Rollback is not executed, because I check @@error after last insert,
which is successfull .
CREATE TABLE [dbo].[testTable](
[rowID] [tinyint] NOT NULL,
[rowValue] [varchar](50) NOT NULL,
CONSTRAINT [...runtime error 5: invalid procedure or call argument
Hi! I'm having problem with my POS, i'm getting an error runtime error 5:
invalid procedure or call argument when i ran POS when i perform item lookup.
I already reinstalled MSDE and RMS v1.2 but still the problem exist on one of
my POS terminal. All other terminals are doing fine so i guess there's no
problem with the database.
Your help would be much appreciated.
> Your help would be much appreciated.
It's also possible that it's a component problem.. old version of MDAC
or other components.. the registers have the same softwa...type of data convertion error
when i'm trying to import or just to make a linked table i found
errors in the some of the fields becaouse of the type of data
whenever there is a mix in one column between some that are numbers
and some that are chars the default is char but the numbers are
how can i overcome the problem?
...Value error #2
in cell K31 I have this formula.
but I keep getting a value error.
basically what I am trying to achieve is that if there is a value of more
than 0 in cells L31 and/or M31, then the formula will not put a value in
Appreciate any help.
Didn't I give you a response to a very similar question?
Microsoft MVP Excel
"Mel"...Upgrade of ADC with ADC SP1
I have a mixed 5.5 and 2003 exchange environment and am
currently trying to upgrade the 2003 ADC connector with
the version that ships with exchange 2003 SP1.
There is no upgrade.exe only a setup.exe and no
instructions. (very tardy Microsoft) when I run setup, I
After searching the internet for two hours and finding
nothing, I thought I would try Add/Remove and see what
the next screen said. I took the defaults and pressed
next and the setup, after a setup successful message I
Thinking that the ADC was now upgraded I tried to...Calendar contains corrupt data error 0x8E5E0226
"Window Live Mail could not be started. Closeing Window Live Mail. Your
contains corrupt data that is forcing Window Live Mail to close. (0x8E5E0226)"
I keep getting the this error when I try to open WLM mail on my Win 7
machine. When I first loaded WLM on everything worked fine. I then used the
"Transfer your files" wizzard to move the files off of my older machine on
the newer one and after an update I was then unable to open WLM.
I have seen this question posted elsewhere but have not seen a response on
how to address the problem.
Thoughts...Outlook Error Msg
How come in Microsoft Outlook I often get the error msg: 'The operation
failed due to network or other communications problems. Check you
connections and try again.'? Outlook most often works when I first bring it
up, but when I try to check email later, I often get this msg?
P.O. Box 1816
Monterey, CA 93942-1816
Home Phone: 831-648-8651
Cell Phone: 831-402-4943
FAX Phone: 831-649-7174
Below is the email address to contact Bob Runkel:
...Publisher/Excel Linked Objects Error
I have Excel spreadsheets which I link certain sections to
various Publisher files. When I open a few (not all) of
the Publisher files and the update links begins, I receive
an error: "A document with the name ??????? (Excel
spreadsheet name is shown) is already open. You can not
open two documents with the same name, even if the
documents are in different folders. To open the second
document, either close the document that is currently
open, or rename one of the documents." This error occurs
even though there is only one occurence of the Excel
document open. I can cl..."error loading operating system"
I had problems with my main hard drive (HD#1) - Windows would load normally
and mouse and key board worked but all the icons were dead - could not load
programs - did System Restore with three previous restore points and still
had same problem - could not believe System Restore did not solve this
problem - entered BIOS and booted into backup hard drive (HD#2) and used a
True Image file (about 2 weeks old) to restore HD#1 - worked fine - shut
Later went to boot back up into HD#1 and got message "Error Loading
Operating System" - tried 2 more times -...Error Printing SOP (Error in equation '(c) Force Functional')
I have problem in SOP. while print one of the item getting error (Error in
equation '(c) Force Functional').
I would reckon this is modified report. Please review all equations of
calculated field (c) Force Functional in Report Writer.
Let us know you go!
Dennis Araullo, MACS
Microsoft Certified Technology Specialist GP,CRM,AX
MCITP Installation and Configuration AX 2009
MCITP Database Administrator SQL 2008
Citrix Certified Enterprise Administrator
> I have problem ...error message #36
When closing outlook Express 6, an msimn.exe -
Application Error message reading "The instruction at
0x77f83907 referenced memory at "0x009a48ec".
The memory could not be written. Click ok to terminate
Any advice to solve this problem would be appreciated
Eddie <email@example.com> wrote:
> When closing outlook Express 6, an msimn.exe -
> Application Error message reading "The instruction at
> 0x77f83907 referenced memory at "0x009a48ec".
> The memory could not be written. Click ok to terminate
> the program
&g...Class diagram error
I've created a class diagram which has a method with 2 paramaters and
returns a void
When i check the uml code in Visio it says that you can't have a
parameter with a datatype of void
Visio adds the return type under the paramaters options.
If i remove the paramater then visio complains that my method has no
Is there some other option or am i doing something wrong..any help
...HOW to remove ADC?
I had upgraded my exchange 5.5 using ADC. After the upgradion i have
deleteled the exchange 5.5 accaount from my active directory i dont have the
backup of my active directory now i cant remove the ADC or install the new
exchange 2003 because its asking for old 5.5 exchange. is there any way by
using ADSI edit tool. Please help me.
Reposting since I wasn't subscribed the first time....
Microsoft Excel 2002 SP3.
I have data that looks like this:
Median Min Max
Na 0.032617 0.000106 0.387142
Cl 0.0265 0.000017 0.282087
Ca 0.000524 0.0000047 0.0059883
K 0.005523 0.000007 0.038365
Mg 0.0000823 0.0000001 0.0018515
PO4 0.00031 0.00002 0.00105
HCO3 0.001655 0.000262 0.003048
I'm doing a line plot with the first column as the categorical x axis,
and the second column, median, on the y-axis, which is logarithmic. I
then set up error bars using the values in the min and max column
(columns 3 and 4 above) as custom values...Error Message "Compile Error: Variable not defined"
I have copied a form from an inherited database to a new one. When I click on
a button on the form I get the above error message, Visual Basic opens with
the text in brackets highlighted in the following line:
It works OK in the original database.
Check the database where it *does* work for which References are selected
(in the VBA Editors: Tools>References), and make sure all are selected in
the new database.
MS Access MVP
http://rogersaccessblog.blogspot.com...Outlook error #14
How can I resolve "ciceroUIWndFrame:Outlook.EXE error
when opening Outlook and again when opening my "send &
...Windows update error code 8000FFFF
Does anyone know what the above code refers to? I can get no help from the
Windows Help and Support site. The error code occurs when I click on the
'search for updates' button. That's as far as I get.
I was in fact just trying to load some HP software in order to connect to a
new printer, but when this wouldn't work, it was suggested that step 1 to
fixing the printer connection problem would be to make sure my updates are up
to date! Any advice?
Error when you download updates using Windows Update or Microsoft
http://support.micro...Excel error msg when inserting new column
I got following error msg when inserting a new column. Does anyone
know what the msg is about?
"To prevent possible loss of data, microsoft excel can not shift
nonblank cells of the worksheet. Try to delete or clear the cells to
the right and below your data. Then select cell A1, and save your
workbook, to reset the last cell used. Or you can move the data to a
new location and try again"
you somehow have set the used range to the last column.
You may try the instructions on the following site:
to clear the used range. After this...