Publisher 2000 clips
Is there a way to avoid swapping cds to get clips? A way to put all the clips
on the hard drive at installation? Thanks, LN
> Is there a way to avoid swapping cds to get clips? A way
> to put all the clips on the hard drive at installation?
> Thanks, LN
Have a look at the following KB article:
(212542) Typical installation does not install
all the clip art in Publisher 2000
This is not tech support.
I am only a volunteer.....
Solutions that work for
me may not ...Exchange 2003 SP2 + Security Updates = OWA Problems
I wonder if anyone can shed any light on why whenever I install the latest
patches on my Exchange 2003 server, the OWA stops working and users receive a:
SERVICE NOT WORKING
message when going to the web page. Add/Remove programs and uninstall the
latest security updates and it works again. Is this a common problem? Does
anyone have any fixes?
I don't want to put on SP2 until I work out why it is doing it.
Cheers in advance for any help.
On Mon, 28 Nov 2005 08:11:07 -0800, "Andy"
Can I install a second exchange, only for the Email Router, leaving the
mailboxes in the first one?
I'm trying to troubleshoot the problems related with a clustered Exchange.
Can I work arround this way?
The router needs to be installed on whatever machine servers as your SMTP
gateway. If the users are partitioned somehow tha tthe SMTP taffic will come in
through that ned Exchange server, than yes, you can do this.
MVP - Microsoft CRM
On Wed, 13 Oct 2004 19:27:01 -0700, Ca...Exchange 2003 mailbox permissions being reset
I have seen many posts on this same problem with no real answer,
hopefully somebody out there has found a solution. I add "send as"
rights to a mailbox for a user other than the owner of the mailbox (or
full access, make no difference) and it works fine for a short while,
then when less than an hour goes by (not sure exactly how long), the
user that was added in the permissions tab is missing and obviously the
send as ability is gone. I have tried adding the user on the Security
tab, then also hitting the advanced button and adding it there (per ms
kB#327000). The user that I'...Exchange 2000 and DNS in MS Adv Serv 2000
I have a couple of problems on my Win 2k Server where Exchange 2000 is
installed. I configured the computer as its own PDC and have DNS
configured. The following ipconfig information for the machine is as
ip address -- 192.168.200.4
ip gateway -- 192.168.200.1
ip dns -- 192.168.200.4
When I go to send an email from a client machine with Outlook Express, I
can connect to the SMTP service. But the email never gets to its
destination. When I do a nslookup at the cmd line on the server, I get a
"time out" message for dns server...Outllook 2000 Error
Anyone have any experience with the following error:
OUTLOOK caused an invalid page fault in Module
I've tried running the "Repair Office" and it seems to
clear up for a bit them comes back.
...Exchange 5.5 intrasite replication through a firewall
I am hoping someone can help, I have looked all over forums and found
what I thought would be the solution but is does not work.
I have a mixed mode Exchange site with 3 Exchange 2003 servers (SP2
running on w2k3 sp1) and one Exchange 5.5 server (sp4 & post sp4 rollup
running on w2k sp4).
The 5.5 server is in a DMZ so I have attempted so set static ports for
the DS, IS MTA and SA, but in reality all I really need is the DS as
this is not a mailbox server, simply an OWA server for the other sites
that are still running on Exchange 5.5.
I have set this registry setting and othe...Outlook 2000 #178
Does this version of outlook have the ability to sync
with my hotmail account, or am I going to have to keep
using outlook express?
Taraneh <firstname.lastname@example.org> wrote:
> Does this version of outlook have the ability to sync
> with my hotmail account, or am I going to have to keep
> using outlook express?
Outlook 2000 does not support HTTP mail accounts, which includes Hotmail.
...scheduled reboot for Exchange servers
When I use shutdown.exe and reboot.vbs script to restart Exchange 2003
servers on a schedule, it looks like the exchange services are killed before
the transaction logs are committed to the database causing below errors:
Event Type: Information
Event Source: ESE
Event Category: Logging/Recovery
Event ID: 300
Time: 12:26:20 PM
Information Store (3316) Second Storage Group: The database engine is
initiating recovery steps.
For more information, click http://www.microsoft.com/contentredirect.asp.
is there a better (less manu...Exchange Rules
How can i set server's rules for the clients?
...Contacts gone: Address book still there
After a spell at the laptop I come back to pc and find the Contacts panel in
The address book still has them in, but I can't see how to get them back in
1 what made them disappear?
2 how do I put them back?
The Contacts Pane may appear empty if the number of contacts in the
Address Book exceeds 999.
Imperial Beach, CA
"spamlet" <email@example.com> wrote in message
> Hi all,
>...Blocking file extension in 5.5
I am trying to figure out how to block certain file
extensions in Exchange 5.5. I see that MIMM is used to
attach a certain file extension to html, text and so on.
What I am looking for is blocking certain extension from
You will need an Exchange AV program to do this.
Check out Trend Scanmail or Sybari Antigen.
I use Scanmail.
MVP - Exchange
"Chris Childs" <firstname.lastname@example.org> wrote in message
news:11ffc01c...shared Access 2000 db in Access 2007
I have a shared (split) Access 2000 database without security. One of my
users now has Access 2007 and gets an insufficient permissions error when she
tries to use the data base. Since there is no mdw file, I cannot set up a
pointer to it. How can I make it possible for the user to run the software?
The PC is running Windows 7 Professional.
Check to be sure the user has permissions on the folder in which the
back-end is stored.
Microsoft Access MVP
Disclaimer: This author may have received products and services mentioned
in this post....Stopping unsolicitied spam
Is there a way to "block" an entire domain at a server level? We have an
issue with someone at a domain spamming our entire block of addresses.
Craig Tuttle - Level I Exchange Tech
What version of Exchange?
"Craig Tuttle" <CraigTuttle@discussions.microsoft.com> wrote in message
> Is there a way to "block" an entire domain at a server level? We have an
> issue with someone at a domain spamming our entire block of addresses.
> Craig Tuttle - Level...address lists or public folders?
I am a newbie to Exchange. I am currently evaluating and testing Exchange
2003 for our office. I would like to know what is the recommended way of
maintaining public & private contacts lists. What I would like to do is as
1. Maintain a public list of employees and their email addresses.
2. Allow each employee to also setup their own private list of Contacts and
giving them the ability to only allow certain other users (maybe secretrary)
have visibility. This way they can get access to their Contacts remotely too
i.e. via OWA or via Pocket PC hot sync?
So which is bette...Collecting E-mail Addresses from E-mail Messages
I am using Microsoft Vista Home Premium and Office 2003. Is there a way to
get Outlook to collect all the e-mail addresses that I have sent to and
received from and put them in one handy list to be organized?
> I am using Microsoft Vista Home Premium and Office 2003. Is there a way to
> get Outlook to collect all the e-mail addresses that I have sent to and
> received from and put them in one handy list to be organized?
Starting to make your holiday card mailing list?
Unless you have saved a copy of every e-mail that you have received (or, at
least, th...Blocking SPAM #2
How do I check Reverse DNS on incoming emails and then how do I block them
from ever reaching my users?
Exchange does not directly support RDNS lookups.
"Lar" <Lar@discussions.microsoft.com> wrote in message
> How do I check Reverse DNS on incoming emails and then how do I block them
> from ever reaching my users?
"Lar" <Lar@discussions.microsoft.com> wrote in message
> How do I check Reverse DNS on incom...From a Temp Exchange 2003 to a new Production one
Thanks for taking the time to read this.
I recently migrated an Exchange 5.5 system to a new Windows 2003 Forest with
Exchange 2003. All went very smoothly (Phew!)
The Exchange 5.5 system ran (until yesterday) on a decent server. The
Exchange 2003 system is running on a temporary server at the moment.
Having decommissioned the Old Exchange 5.5 server now, I've rebuilt it as a
Windows 2003 server in the new domain and have installed Exchange 2003 upon
It has appeared as a new server within the organisation. Excellent so far.
What I want to do is move all mailboxes, public f...Outlook as alternate to Exchange CALs??
Microsoft's web site states on the How To Buy exchange=20
page that "Each Exchange 2003 CAL also includes Microsoft=20
Office Outlook=AE 2003". I have also heard rumors that if=20
you already of Outlook 2003 (i.e. as part of having Office=20
2003 Enterprise), then you don't need an Exchange CAL for=20
that machine, similar to not need to have a Terminal=20
Services CAL if your fat-client is running Windows XP. =20
Has anybody else heard any such thing? Thanks in=20
The way we understand it is that the Exchange CAL gives you the right to run
Outlook as yo...Missing Address Data
Using CRM V1.2, W2K, and the outlook client under XP SP2 with all the
patches, a user can see all the accounts data while on-line, but when he
switches to offline, not all the account data is present. The company name
and a few others, some custom fields and some standard fields, but the
address information is missing. If he goes back online, they are there, and
when he goes back off line they disappear again. I have another user setup
the exact same way (security roles as well) and he can see the address
information whether on line or not.
You'll want to check on the SQL s...Free/Busy Exchange 2003 and Exchange 5.5
Where I can configure Free/Busy replication between Exchange 2003 and
I put Exchange 2003 in Exchange 5.5 site for migration, messages work fine
but schedule appointments don�t sincronize.
Any suggestions ?!
Hi pls look at this KB
http://support.microsoft.com/default.aspx?scid=kb;en-us;307917 (3.Rehome the
Schedule+ Free Busy folder: )
"Alessandro Neves" <email@example.com> ���g��l��s�D
> Where I can confi...Changing "Reply To" address has no effect...
Outlook 2000 - if I change the Reply To address for an
email account it has no effect, the old Reply To address
remains for all mail sent through that account. Any ideas?
Where are you changing the address?
Milly Staples [MVP - Outlook]
Post all replies to the group to keep the discussion intact.
After searching google.groups.com and finding no answer:
Mike <firstname.lastname@example.org> asked:
| Outlook 2000 - if I change the Reply To address for an
| email account it has no effect, the old Reply To address
| remains for all mail sent through that account. Any ideas?
...Exchange Standard 16gb size limit monitoring
I hit the 16gb limit the other day in my Exchange Standard installation. I
figured out how to fix the problem (dismount and use ESutil), but I don't
want to hit that size limitation again. Is there a free script or tool out
there to notify me when the size hits 15gb? Where can I find out the size
of the Storage group?
"JohnS" <JohnSPAM@hotmail.com> wrote in message
>I hit the 16gb limit the other day in my Exchange Standard installation. I
>figured out how to fix the problem (dismount and use ESutil), but ...Does Outlook 2003 include an Exchange Lic?
Wondering if you buy Outlook 2003 for $109.00, does that include a Lic for MS
Exchange or do I need to purchase both for each user?
The outlook license should be ok... but what version of Exchange? The
exchange 2000 and 2003 client access licenses include Outlook 2003 and cost
about $70, although I'm not sure if there are minimum purchase requirements.
Diane Poremsky [MVP - Outlook]
Author, Teach Yourself Outlook 2003 in 24 Hours
Coauthor, OneNote 2003 for Windows...Outlook OLE error and freezing problem after Win2k SP2 install on Exchange??
Yesterday, we were hit by the blaster worm (yeah....got me running like
hell). Our Exchange 5.5sp4 servers run on a Win2k Advanced Server SP1
cluster. I was forced to install service pack 2 for Win2k because the
MS03-026 patch requires that. Ever since that, users who have Office 2000
versions less than SP-3 installed had freezing problems when viewing
calender. Pulling up Excel attachments end up with a "object linking and
embedding not found" error. There is also a Word error of some kind when
openning Word attachments. Once I place SP3 on there, everything works
fine. What ...