#### to find out number off offdays of each employee

```I have  to find the number of offdays depending upon the values of two cell
A1 cell
and B1 cell
A1 ( Saturday)  cell contain  1,2,3,4
B1 cell contain number of off days   in January 2008.
This is the active cell.  Here I have to find out the number of off days by
calculating the value of A1cell.
If A1 cell  =  1 that means every Saturdays will be offdays. Here I will
apply the formula
num_sat=(WEEKDAY(ROW(INDIRECT(DATE(2008,1,1)&":"&DATE(2008,1,31))),1)=7)) .
I will get number of saturdays

If the value is 2 then  the off day will be  every 2th Saturdays.  For
example in January 2008 the offday will be in this case .

12,26  so number of Saturdays offday in January month  will be 2

If the value is 3 then offday will be evey 3rd Saturdays  For example in
January 2008 the offday will be in this case .

Offday will  be 19 so the number of offday will be 1

So how I can find out the number of offday using  the formula
WEEKDAY(ROW(INDIRECT(DATE(2008,1,1)&":"&DATE(2008,1,31))),1)=7)) and to write
in B1 cell

with thanks
Pol

```
 0
Pol (15)
10/31/2008 10:53:00 AM
excel 39879 articles. 2 followers.

1 Replies
562 Views

Similar Articles

[PageSpeed] 47

```Hi,

You could try this:

=SUMPRODUCT(--(MOD(ROW(INDIRECT(DATE(2008,1,1)&":"&DATE(2008,1,31))),7*A1)=0))

Where A1 is a number from 1 to 4,

You also might make the formula a little more dynamic by entering the first
of the month in C1 and then

=SUMPRODUCT(--(MOD(ROW(INDIRECT(C1&":"&EOMONTH(C1,0))),7*A1)=0))

The EOMONTH function returns the end of the month is this case the current
(0) month.  This is an analysis toolpak function so you must attach it via

If this helps, please check the Yes button.
--
Thanks,
Shane Devenshire

"pol" wrote:

> I have  to find the number of offdays depending upon the values of two cell
> A1 cell
> and B1 cell
> A1 ( Saturday)  cell contain  1,2,3,4
> B1 cell contain number of off days   in January 2008.
> This is the active cell.  Here I have to find out the number of off days by
> calculating the value of A1cell.
> If A1 cell  =  1 that means every Saturdays will be offdays. Here I will
> apply the formula
> num_sat=(WEEKDAY(ROW(INDIRECT(DATE(2008,1,1)&":"&DATE(2008,1,31))),1)=7)) .
> I will get number of saturdays
>
> If the value is 2 then  the off day will be  every 2th Saturdays.  For
> example in January 2008 the offday will be in this case .
>
> 12,26  so number of Saturdays offday in January month  will be 2
>
> If the value is 3 then offday will be evey 3rd Saturdays  For example in
> January 2008 the offday will be in this case .
>
> Offday will  be 19 so the number of offday will be 1
>
> So how I can find out the number of offday using  the formula
> WEEKDAY(ROW(INDIRECT(DATE(2008,1,1)&":"&DATE(2008,1,31))),1)=7)) and to write
> in B1 cell
>
> with thanks
> Pol
>
```
 0
10/31/2008 9:09:00 PM

Similar Artilces:

Find Duplicate names and delate
Dear experts, I have a small doubt could you clarify that??? That is I find duplicate name but I want to delete one name only, if I filter DUPLICATE….. both names are showing… 1. Select the range of data including the header. You need to have headers for these columns 2. From menu Data>Filter>Advanced Filter>Copy to another location 3. In 'copy to' specify the target cell and check 'Unique records only' 4. Click OK will give you the unique list -- Jacob "Find Duplicate names and delate" wrote: > Dear experts, > I have a small ...

I need to compare 3 numbers and find the one in the middle
I have three numbers in a single row and would like to identify the middle number enter that number in another cell. Example: 1st # 2nd # 3rd # result 628 678 720 678 655 625 700 655 748 720 725 725 is there a function in excel that can do this? Thanks, Eddie Try =LARGE(A1:C1,2) VBA Noo -- VBA Noo ----------------------------------------------------------------------- VBA Noob's Profile: http://www.excelforum.com/member.php?action=getinfo&userid=3383 View this thread: http://www.excelforum.com/showthread.php?threadid=56811 fasteddie wrote.....

how do I delete numbers without deleting formulas
In excel 2003 how do I delete a column of numbers without deleting the formulas in the column? F5>Special>Constants. Use the option buttons to select what you wish to highlight for deleting>Ok Edit>Clear Contents. Gord Dibben Excel MVP On Sat, 8 Oct 2005 13:13:02 -0700, "Emmaus junkie" <Emmaus junkie@discussions.microsoft.com> wrote: >In excel 2003 how do I delete a column of numbers without deleting the >formulas in the column? ...

how do i get negative numbers in brackets in Excel
i find i cannot enter negative numbers in accounts in brackets but this is the accounting convention is it hidden in excel or do i need a plug in Hi Maverick, Enter numbers using the minus symbol, but format your cells: Format => Cells => Number [tab] and in the Type box, enter "#,##0.00_ ;[Red](#,##0.00) " (without the quotation marks). Ewan. "maverick accountant" wrote: > i find i cannot enter negative numbers in accounts in brackets > but this is the accounting convention > is it hidden in excel > or do i need a plug in ...

Add space after each numbered or bulleted item
I need to make rather long lists of paragraphs that are several lines long. The numbered list feature forces a new number and a new line upon hitting enter. this is expected behavior. However, I need a space between the items to make each item stand out. In Word if I hit enter again, a new number is issued as expected. However if I arrow up to the first empty space and hit the backspace, the number will be removed, the following number will be changed to next sequential number and the empty line remain. Publisher, however insists on starting a new number sequence. Is there any way to c...

Find a Value the first Time It Occurs
I have a row of values that shows the total cumulative number of sales of items by month. Occasionally, there may be no sales in a month for an item so the cumulative value would stay the same for more than one month. I want to select a number in the row the first time it occurs and not select it if it repeats. What are you wanting to do with the info? To return position (column number) of number 1234 within row 2: =MATCH(1234,2:2,0) A formula that signals it's the first occurence: =COUNTIF(\$A2:A2,A2)=1 This could be used in a helper row, or as a conditional format f...

Finding a Median
I'm trying to write a query that will return a median for various values taken from a previous query. I've seen some suggestions in my searching, but I haven't been able to get them working. They are also all from before 2003 and refer to Access 97 and 2000. Has any functionality been added to 2003 for this? Or is there a non- code-based way to do it? I've seen it suggested to write a code to open the query, sort it, find the total number of records, divide it in half, then seek out the middle record using that value. I'm still very green when it comes to code, though...

Find/Replace in RichEdit 2.0
I'm using Windows ME and I've switched from RichEdit 1.0 to 2.0 for my CRichEditDoc/View application so that I can use the ITextDocument interface and can do things such as suspend/resume the Redo buffer. Problem is, now the Find/Replace dialogs don't seem to do anything. If I revert back to RichEdit 1.0 they do! What's going on? BUMP! adriangibbons@yahoo.co.uk (Adrian Gibbons) wrote in message news:<34a2acd5.0404130713.123dbaab@posting.google.com>... > I'm using Windows ME and I've switched from RichEdit 1.0 to 2.0 for my > CRichEditDoc/View application...

Find (but not find)
My program takes a name from sheet3 goes to sheet1 to Find the name. If it cannot find name, how do you do an If/End to Exit Do while or find out if name has been founf? I have "On Error Resume Next" in program. Thanks again for all your help Gordon As ALWAYS, post your code for comments & suggestions. -- Don Guillett Microsoft MVP Excel SalesAid Software dguillett1@austin.rr.com "Gordon" <gwelch1938@yahoo.com> wrote in message news:1184612089.486737.144020@n60g2000hse.googlegroups.com... > My program takes a name from sheet3 goes to sheet1 to Find the na...

Finding an event
Hello, I am developing an app that uses a single worksheet to enter data. When user double clicks a button, a new window (in same workbook) opens with a new sheet. My problem is that excel does not seem to have any events for close of window if there are multiple windows in a workbook. Can someone help Peter Peter, That triggers the Workbook_WindowActivate event, you can use that. HTH Bob "Peter Ostermann" wrote in message news:i9m5v8\$7bv\$02\$1@news.t-online.com... Hello, I am developing an app that uses a single worksheet to enter data. When user double clicks a button...

Find value in a column and insert rows above
The set up looks like this: ColU ColV ColW ColX Y N N N Y N N N N Y N N N N Y N N N Y N N N Y N N N Y N N N Y Y Columns will always be U through X and will always be sorted in this order. I need to find the first Y in each column and insert 2 rows above that row. On the blank row above the first Y, I need to highlight in yellow and put title in the first cell, such as New, Old, Existing, Deleted. Any help would be greatly appreciated. Thanks for your time, Dee If desired, send your file to my address below. I will only look if: 1. You send a copy of this ...

Restore ability to enter 20 character PO Numbers
With the 1.3R release, RMS will not allow PO Numbers longer than 14 characters. Before the 1.3R release, RMS allowed PO Numbers up to 20 characters. After installing the 1.3R release I reported this defect. The support team responded that this change was by design. They claimed that the change was made to work around a defect - "we had a bug with inter-store inventory transfers erroring out when the PO number is greater than 14 characters". This type of quick and easy fix (crippling the UI to work around a defect) is just plain wrong for at least a couple of reasons. 1) C...

cannot find database
I have an excel spreadsheet that is supposed to update a access db. Whenever I try to save the .xls I get an error stating cannot find db. Even when I open the db with access, I get the error and the db opens anyway?????? This only happens on 2 out of 20 pc's and I cannot figure out why???????? Thanks ...

Sum if Condition is Equal in Range Date and find column
I want to make a sum if Range is a week number and if style is Equal to CONC-92 or CONC-45 Week# 49 Week# 50 CONC-92= 27 CONC-92= 30 CONC-45= 27 CONC-45= 30 Datas are in a pivot table and... Pivot table looks like this: Date CONC-92 CONC-45 CONC-92 CONC-45 12/7 5 5 10 10 12/8 2 2 10 10 12/9 5 5 10 10 12/10 5 5 10 10 please help -- Lorenzo Díaz Cad Technician ...

Trapping a NO FIND after a find
I use the code below to store a row number to a variable after a find. I would like to trap a NO FIND if the find is unsuccessfull Any ideas. FSt1 provided the code below Sub macfindrow() dim rn as string dim rng as range dim therow as long rn = inputbox("enter something to find") if rn <> "" then Set rng = nothing Set rng = range("A1:IV65536").Find(what:=rn, _ After:=Range("A1"), _ Lookin:=xlformulas, _ Lookat:=xlpart, _ ...

How to reduce the number of shortcuts/links in the recent documents list?
When I look into the folder: C:\Documents and Settings\<username>\recent then there are currently approx 20 recent documents listed. How can I permanently reduce the number or even disable this list? Cindy Cindy Parker wrote: > When I look into the folder: > > C:\Documents and Settings\<username>\recent > > then there are currently approx 20 recent documents listed. > > How can I permanently reduce the number or even disable this list? > > Cindy > Right click on the Start button and choose Properties --> Customize ...

How do I find the out of office reply?
My out of office reply is missing from tools. How can I retrieve it? Out of Office reply <Out of Office reply@discussions.microsoft.com> wrote: > My out of office reply is missing from tools. How can I retrieve it? Unless you are using an Exchange server, you will not have the Out of Office Assistant. See this: http://www.slipstick.com/rules/autoreply.htm -- Brian Tillman ...

How do I find data from a list (or table) and insert it in a row?
I used to use a spreadsheet program (2 years ago) that allowed me to lookup an item and insert it into the worksheet. I know the program was at least a year old at that time (2002). How do I create a list, reference it , and then insert an item into a row of my choice? Example: Make of item, item description, and cost. Does the data go on one worksheet and then get referenced and inserted into the list of another worksheet? If so, how? I can't seem to get any answers by reading books on the subject. I no longer have access to the old workbook from which to study. Maybe that ...

Automatic numbering feature:
Is there a way to have a template (such as an expense report, policy order, etc.) in Excel automatically number the document by who pulls it up first off of the server? Thanks in advance. ~VR Automatically number by who pulls it up first? What does that mean? We can make a worksheet have an autonumber if John opens it, then increase by one if Joe opens it, etc... Coupl'a methods: http://www.vbaexpress.com/kb/getarticle.php?kb_id=351 http://www.vbaexpress.com/kb/getarticle.php?kb_id=349 **************** Anne Troy www.piersontech.com www.mrexcel.com "VVV1299" <VVV1299@di...

Copy PDK employee information from one company to another
Hi everyone, In PDK, is there a way to copy all the active employee's information from one company to a new one? Thanks a bunch Ian, I dont think we do have such option in PDK and if someone else says it do exist, it'd be a good learning for me as well. Thanks Janakiram M.P. MCP-GP "Ian2009" wrote: > Hi everyone, > > In PDK, is there a way to copy all the active employee's information from > one company to a new one? > > Thanks a bunch ...

Conditional Number Formatting & Selective Summing
Attached is the workbook I need help with. From what I have bee discovering from the Excel Macro-VBA Editor-Help screens, what I wan to do should require fairly simple VBA code. However, I have no VB coding experience or skills (the VBA code in Module 3 was gleaned fro the Excel Tips Forum. Thank you Harlan Grove) Sheets �Run� through �Run (30)� are identical, except that the cel formulas on sheets 2-30 are only active if the active sheet i �Enabled� by the user and will only populate with pulled data if al preceding sheets are �Enabled�. The nature of the workbook is such tha a user will alw...

VBA Multi Number-Letter Sort
I'm sorting a list of old in-stock items, example: GEARS / 1/8_spur 1/4_spur rack_1/4pitch. It was all put into a single column. Now I could count left/ middle etc and send it to a different sheet then sort the sheet etc etc etc etc. I would be very happy if I could find a link to a source of vba code I could change or use just to sort things like "3rd # 8 before 3rd # 4" or "W18x21 after W8x10" . Can I do this simply with vba, I keep looking but it does not look promising. just wandering thanks rentapen ...

Finding numbers in rows and highlighting them
Hi everybody :) I need help. This is a lotto system. I have a spreadsheet with 508 rows and 45 columns. In each row there are 45 numbers mixed (1 to 45). I need a script or some other way to find where particular (drawn) numbers are in each of the 508 rows. If my explanation is not clear please ask for farther clarification. Thank you in advance for your help. Joh -- Johncobb4 ----------------------------------------------------------------------- Johncobb45's Profile: http://www.excelforum.com/member.php?action=getinfo&userid=1658 View this thread: http://www.excelforum.com/showt...

use port number for the sql server? while installing CRM 3.0
when installing Microsoft CRM 3.0, can we use port number for the sql server? Responded to on the CRM Deployment forum. -- Rgds Michael MCDBA 2000 | MCITP DBA 2005 "Amit - Techtrends" wrote: > when installing Microsoft CRM 3.0, > can we use port number for the sql server? ...

Restart heading numbering in each new section of a Word 2007 docum
I have produced a thesis of around 100,000 words in Word 2007 using docx format (because I want to use automated TOC and Indexing). My doucment is divided into sections (using section breaks), each comprising a chapter with a Title. I have been using the outline headings provided in Styles, using levels 1 through to 6. Presently the numbering runs on through the sections which results in huge numbers, as you would imagine. How do I make the heading numbers reset to 1 in each new section of the document? First of all, although there may be other good reasons for using Word 2007, ...