Custom entity errors
When I try to create a new entity I get the following message upon saving..
An error has occured please contact your system administrator.
Everything else seems to be working.
Most likely a rights issue. DO you have proper rights to make changes to the
MS SQL database?
Anne Stanton, MVP-CRM, MBA/ACC
The Norwich Group
"Dave" <Dave@discussions.microsoft.com> wrote in message
> When I try to create a new entity I get the foll...Pivot Tables #4
Hello you experts out there.
I nned some Pivot table advice ( a website address for
basics would be great), for instance how to excplain
pivots and how to create them.
I use lots of products with lots of sizes from various
suppliers to name but a few columns. Is there a limit as
to the amount of columns of data?
Thank you very much.
check out Debra Dalgleish's site - http://www.contextures.com/tiptech.html -
she has a link to Jon Peltier's site which explains PT basics and then lots
more interesting info on them.
check out www.hcts.net.au/tipsandtric...Pivot Table Counting
I am having trouble trying to calculate fields through a pivot table.
Basically, I have a data set that looks like this:
Record Number State Value
1 CA 0
2 CA 12
3 CA 15
4 NJ 0
5 NJ 10
I want to set up a pivot table that will show 2 columns, one with th
total number of records and one with the total number of records wit
non-zero values. Both of the...Pivot Tables
I was windering if some one could provide me with a link to a tutorial for
what I am trying to do.
I have an aggregate table. This table has several groups and several
columns. The intersection of a group and column is an aggreate value such as
Sum function of a column value in that group.
Normally a Pivot table shows 1 aggregate value at the intersection of a
group and a column. What I want is:
To show more than one value at the intersection besides the aggregate value.
In other words, if a simple pivot table cell is:
Aggr(x,y) where aggr is an aggregate function such a...Pivot Chart Formatting #5
How can I format a Pivot Chart and keep the customized format when refreshed?
This is a known issue by Microsoft.
Short answer, you can't do it. =(
One possible work around is to record a macro of you setting the formatting
of the chart, and then set it up so that the macro runs whenever the chart
*Remember to click "yes" if this post helped you!*
"Germeny Santos" wrote:
> How can I format a Pivot Chart and keep the customized format when refreshed?
This is dependent on what custom formatting you are refering to. T...error with sending mails .
...sql 2000 error handling
I have a sql SP that process text file into a sql table.
I need to have error hjandling for the SP. .net interface can get the error
Raiserror() ---how do i get error message?
Mecn (email@example.com) writes:
> I have a sql SP that process text file into a sql table.
> I need to have error hjandling for the SP. .net interface can get the
> error message.
> Raiserror() ---how do i get error message?
Where do you want to retrieve the error message? Your question is somewhat
terse. Maybe you could elaborate a bit?
...Different Error Bars for Each Point
How do I make separate/different y-error bar for each data point in Excel
2003. As far as I can tell it isn't possible, but it would be a life saver if
someone could help me out.
point A needs a +- of 2.7, but point B needs a +- of 3.2. And so on...
Scroll about halfway down, to the section called Custom Error Bar Values:
Error Bars in Excel Charts -
or if you're stuck with Excel 2007:
Error Bars in Excel 2007 -
Peltier Te...Converting Leads to Contacts Duplicate errors
We cannot convert leads to contacts and are getting duplicate errors.
There are no duplicates. We are running 4.0 rollup 11.
And we get this error everytime we try on CRM server:
Event Type: Warning
Event Source: ASP.NET 2.0.50727.0
Event Category: Web Event
Event ID: 1309
Time: 2:35:01 PM
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 8/3/2010 2:35:01 PM
Event time (UTC): 8/3/2010 7:35:01 PM
Event ID: 19b210ef795f42129b2af3d7b447c2bc
Event sequence: 157
Event occurrence: 1
Event detail code: 0
Applic...Pivot table question: Sorting the subgroup in a pivot table (when using the top 10 option for the subgroup)
I have created a pivot table which has a one subgroup in the second
column from the left. It uses the Top 10 option, so there are 10
So my data looks something like this:
Group 1 50
Subgroup 1a 10
Subgroup 1b 40
Eight more subgroups
Group 2 30
Subgroup 2a 20
Subgroup 2b 10
Eight more subgroups
What I would like to do is sort by THe totals for Group 1, but then
also sort by the subgroups, based on the values for each subgroup
(similar to the "Sort by, ...join multiple pivot tables?
How can I link up multiple pivottables all based on the same data where all i
would have to do is change the page option (drop down menu) from the first
pivot and the rest of the pivots would automatically adjust to match those?
There's a sample file here in which you can change the page field in one
pivot table, and all the related pivot tables change:
Under Pivot Tables, look for 'PT0021 - Change All Page Fields' or
'PT0008 - Change Multiple Page Fields'
> How can I link up mu...IFrame Error-
Here is my issue- In leads I have an iframe displaying related closed
activities to that lead. The iframe loads but i can not click on any of the
icons or the activities to bring them up. If I F5 (refresh) page it will
allow me to click on the buttons and related activities. I think it could be
one of 2 things: Internet security in IE (I have my CRM site as a trusted
site) or a coding issue. Code is below. Thanks in advance for any help
if (navActivityHistory != null)
Getting an run-time error 1004 on this simple statement
Can't figure out why.
What does the error message say? Does your file have a sheet named
"AllSheet"? Look at the spelling carefully. Does the sheet name in the
sheet tab have a space before or after the name? If you're not sure, rename
the sheet the same name, being careful to not add a space before or after
the name. HTH Otto
"HeartSA" <haertSA@yahoo.com> wrote in message
news:%23YFsc5D0FHA.1028@TK2MSFTNGP12.p...Help with pivot table
I'm after some help with a pivot table
I have created a work book to log certain defects, and would like to use a
pivot table to show defects per unit on an improvement tracker, is it
possible to have the pivot table to shift cells to the right when it is
updated and required more columns so it doesn't overwrite data on the sheet
it would be like this
the componet fault unit numbers & Total defects are the pivot table & the
action would be the start of the manual data
Compontent Fault Unit Numbers Total Defects Action
1 2 3 4 5
Light Inop 1 1 ...04: HOLD-CALL (CC Error Message)
I have researched the Hold-Call issue on source, but can not find any info. I
know this is all cc setup related, but if anyone has any info on what exactly
the Hold-Call error is, this is usually helpful when working with the issuing
This is a multi-part message in MIME format.
Jocely...How to re-enable the "source path mapping" dialog
I am using VS2005 + CE 6.0 R2.
When I use KITL to debug a program, a pop-up dialog show up, wants me
to give the "source path mapping".
But once the check the "don't show up" option on that pop-up dialog,
it never shows that dialog when I run a program.
How to re-enable the auto pop-up dialog when VS2005 CE 6 find no
proper source path ?
Check out in the following 'Options' dialog box of VS2005
Tools--> Options-->Platform Builder for CE-->System Debugger
...Workflow Errors #2
We have some workflows we setup for a customer on some new custom entities
but they continue to get hungup in a waiting state. In looking the error
codes on the System Jobs - it shows -2,147,220,969 as the Error Code with a
Workflow paused due to error: Unhandled Exception:
Anybody have any thoughts on to resolve this - we also can't delete them.
On Jun 25, 5:31=A0pm, Old School <OldSch...@discussions.microsoft.com>
> We have some workflows we setup for a customer on some new custom entitie=
> but they co...Error message c:\windows\system32\actext.dll
I get the following in opening Outlook 2002 ..can anyone
...Error while installing workflow for GP 10
while installing workflow for GP10 getting InstallSystemSecurityMetadata.exe
error. We have installed MOSS and Web Service on a single server and even
trying to install workflow on same server
This error is occured if you installed these applications other than a
domain user. You ensure that this machine is a part of a domain controller
and use a domain account to install all these.
> while installing workflow for GP10 getting InstallSystemSecurityMetadata.exe
> error. We have installed MOSS and Web Service on a single server ...Can I permanently delete/hide data within Pivot Tables?
Microsoft Excel 2002
I have 155 clients which I need to run Pivot Tables for! All with the same
pivot table layout.
Is it possible to run the Pivot table with the 155 clients as a Template
basically, then somehow delete or permanently hide the data leaving only one
client, so that I can save multiple copies for each of the individual clients?
Or can I set up a pivot table where I can automatically feed in parameters?
Client details are stored on an Oracle database!
Right-click on a Page Field and select Field Settings from the context menu,
then click the Advanced button. Yo...Using formulas for pivot table
I know you have the count field but is there away to input a formula?
For example customer ordered 25 cases and each case weighs 4 lbs and
the end result would need to be total pounds ordered.
If you do the calculation in the pivot table you may not get the result
that you expect. If possible, add a field to the source data, and
calculate the order total there.
Then, add the OrderTotal field to the pivot table's data area.
> I know you have the count field but is there away to input a formula?
> For example customer ordered 25 cases and each case weighs 4 lbs...win 32 error
i am trying to open files from a disk that i had on my old computer it ran xl
97 and my new computer has xp on it everytime i try to open the file it says
that it isnt win 32 compatable i need some help
...Error Sending Email
ON Windows 2003 Server
I have also installed Email Router on our Exchange Server,
But now i get this error, everyone has this error about sending email,
�s there any solution for this?
Event Type: Error
Event Source: Microsoft CRM
Event Category: None
Event ID: 2
MSCRM Platform Error Report:
Error: <description>An unexpected error occurred.</description><details>An
error occurred attempting to dispat...Hyperlink in Pivot Table
Is it possible to put hyperlinks into a pivot table to go to the detail in
other worksheets? I have a top 10 list of components with issues and would
like the user to be able to click on the component to go to the list of
issues. I thought if I put the hyperlink in the cell where the pivot table
is getting it's info, it would come through, but that didn't work. Any
Just double clicking on the cell with the data of interest, will open
another sheet showing all of the entries making up that value.
Delete the newly created sheet after you have finished w...Pivot Tables #40
Does anyone know if there is a way to quickly clear a field list? I can't
find a keyboard shortcut or anything else in any of the help/support avenues
Thanks in advance for the help.
Are you trying to clear all the check boxes in the field's dropdown
list? In Excel 2002 and later versions, there's a Show All checkbox. In
Excel 2000, and earlier versions, you can use programming to hide or
show the items -- there's sample code here:
> Does anyone know if there is a way to quickl...