Sales of Items below cost
Is there a setting that would alert a cashier or prevent a cashier from
selling an Item below cost?
Item Properties: Pricing Tab: Lower Bound.
You could use a query to set lower bound = cost
Stop fishing for e-mail
> Is there a setting that would alert a cashier or prevent a cashier from
> selling an Item below cost?
...Pivot table and counting.
I have a pivot table that gives me the number of rides done by a van. I can
have the pivot table return the number of rides, but what I need is the
number vans that participated for a certain day. Example, it is possible to
have 27 trips done by 18 vans, how can I count the number of vans and not
addup the van number?
Any help appreciated.
We need a bit more information on how your source data table is set up.
What information do you have in each column?
sacredarms <firstname.lastname@example.org> wrote:
> I have a pi...Cycle Counting
I am looking for ideas on how to cycle count serial
number tracked items without increasing workload. Our
serialized items are barcoded but the problem is the are
situated on the pallet incorrectly and the pallet is
placed on a third level of a racking system.
If we could just cycle count based on item count
and not include the serial number it would make it easy.
Is this possible in Great Plains. We are running Great
Any suggestions are greatly aprreciated.
I would like to know how which formula I should use to count some codes & to
ignore the duplicated codes, for example in column A:
Now, I want Excel to count & the result is 3 which are:
Yes I can use PivotTable, but I would like to use a formula because I have
to deal with this every day.
I appreciate your support.
COUNTIF will do it.
=COUNTIF(Rng,Rng), where the criterion is the same as the range:
> I wo...How do I count the # of times a value reoccurs and plot it over ti
I wish to plot a number of errors made by each users and compare it over
time. I have a column of user ID's and a column of dates. I want the chart
to count the number of times each user ID appears and plot against it's
corresponding date. However, each time I try to do this, the chart appears
wrong. Any ideas?
In article <9595B2A1-8282-4AB3-8511-A6776E108164@microsoft.com>,
> I wish to plot a number of errors made by each users and compare it over
> time. I have a column of user ID's and a column of dates. I want t...Line count
I am working with a program called Dictaphone. We use Word 2007 in this
program. The line count on Dictaphone and the line count in Word 2007 are
different even though the Dictaphone text is retrieved from Word 2007. Why
would they be different?
What is the difference between virutal line count and physical line count?
...count number of characters in rich edit control
How can i count number of characters in rich edit control 2
If u mean controls of type Rich TextBox control, try
"Rahul" <Rahul@discussions.microsoft.com> wrote in message
> How can i count number of characters in rich edit control 2
EM_GETTEXTLENGTHEX, WM_GETTEXTLENGTH, WM_GETTEXT, EM_STREAM*
"Rahul" <Rahul@discussions.microsoft.com> wrote in message
> How can i co...Counting sales
I have two different datasets. Each with a common identifier. I need a
formula that will reference the identifiers in both datasets and count the
number of sales a particular agent made. Example. look up this identifier
in the other dataset and then give me the value that is 2 columns over from
the identifier in the second dataset.
See if this helps:
Microsoft Excel MVP
"Dave" <Dave@discussions.microsoft.com> wrote in message
>I have two...Z Report to not print departments with zero sales
How do I amend a z report to not print departments if the sales are zero. We
have 192 departments but only a the sales seem to fall in a small portion...
Thanks. And thanks for all the help I've received...your suggestions have
made this much more bearable for me!
This is a multi-part message in MIME format.
Download one from here, all the way at the bottom =
Must have access to CustomerSource
J...Counting Cells with Conditional Formatting
Is there a way to look at a row of data that is either highlighted yellow or
red and to count only the data that is highlighted yellow and give me that
None of my data is numerical....just one letter data, i.e.: "S" or "U"
I just want to count how many of the cells are highlighted yellow in a
specific row, if that makes more sense.
Here's a UDF (Put in a Standard module)
and use it in cell A1, like =CountByColor(A8:H8,6) << where 6 (at
present) = Yellow = change to =CountByColor(A8:H8,3) to get the reds
Function CountByColor(InRa...COUNT ? need formula
I want to track the results of my teams sales performance.
I record if it is a sale, no sale, cancelled etc in column M. I thought I'd
be able to use the COUNT function/formula to be able to search for all the
SALES in column M and place the result in a cell ( column O )but I can't
work it out.
"Diamond Jones" <kwanzaNOSPAM@optusnet.com.au> wrote in message
> I want to track the results of my teams sales perf...Count Function
I am creating a report for the number of pupils being collected at a certain
collection time e.g. 14:00hr and 15:00hrs
using the formula =Count([Child Last Name]) in the collection time footer
However when i try to count the overall number of pupils in the footer using
the same formula, 'Error' appears on screen?
There are potentially a dozen footer sections in a report. Which one is
giving you a problem? What is the name of the control? What is the exact
Microsoft Access MVP
> I am creating a r...Counting a count
How do I count a count??
This is what im trying to do:
I have a database with a table named tblMain and has incorporated everything
within that table but contains info from about 8 other tables. I have not
doesigned this database and it appears to have a very poor structure...anyway
There are three fields involved in this process...'Request' (either
'dispensation', 'waiver' or 'dispensation and waiver'), 'Department' (which
consists of 7 other drop down menu options) and 'RequestStatus' which
contains the status of each request by another...Count Problem
I have 20 cells in a single column in a sheet called "Audits"
All the cells have a formula in them.
The formula is a simple one that reads whatever I put into a cell on a
different worksheet called "Names"
I would like to have a formula that counts up all the results I get in the
sheet called "Audits"
At the moment if I enter (let say) 15 names in the "Names" sheet the result
is that I see the same 15 names in the "Audits" sheet, however the COUNTA
formula returns a total of 20. SO obviously...unique or distinct count from xml
How to get a unique count from a xml
<Order ID="1111" Amount="200"></Order>
<Order ID= "2222" Amount="10"></Order>
<Order ID="3333" Amount="5"></Order>
<Order ID="1111" Amount="20"></Order>
The result should be 3 unique count and the 4 Order Id counts.
How can i get using
XPathNodeIterator using Compile,Execute with a XPathNavigator
The XPath expression for that is
I am using this routine to replace characters in a large text string.
I would like to know how many replacements have been made.
This is a generalized routine for experimenting.
If I set lReplCount = 1, I can get a count but it takes over one minute to
If I set lReplCount = -1, it takes about 20 mSec but I get no count (except
Is there any way to get speed and the replace count?
I would be happy with a few seconds and an accurate count.
If InStr(1, sText, vbCr & vbCr) > 0 Then
lChangeCount = lChangeCount + 1
...Sales transaction distributions
I'm trying to invoice shared expenses to another company on account (we pay
the costs, then bill the other company for their share of expneses). I don't
want to call this a sale. It's a reduction of our out-of-pocket costs. I
also don't want this picked up as a sale in any of the sales history screens(
e.g., Customer Yearly Summary Inquiry).
On the Sales Distribution Entry screen, I've left the transaction line where
the type is RECV as is. When I change the second line (the expense offset)
from Type SALES to either MISC or OTHER, I get the message "This Sal...Counting text cells #3
I have a range of cells A25:A256 that contain text entries of various types (doesn't matter). How do I get it in cell A258 to give me a total of cells that have text in them within that range 25:256
"Jessica Walton" <email@example.com> wrote in message
> I have a range of cells A25:A256 that contain text entries of various
types (doesn't matter). How do I get it in cell A258 to give me a total of
cells that have ...Smart List record count in 10.0 SP2
I'm wondering if anyone else has seen a situation in the standard smart list
for Purchase Line Items returns a different line count in the window than on
the bottom of the window in the status bar. For instance, a client requested
a search using the view "Today's Expected Receipts", so the window shows 4
rows, but the status bar at the bottom shows 8. The search criteria look to
be the same as in my local view. Trying it in my local view, I get the same
results for other views under this object, for instance the window shows 13
rows, but the status bar shows ...Cycle Count
Client running GP 10.
I am setting up their cycle count schedules and have run into an issue that
I can't get an answer for.
Want to set up the count to give me the following quantity of items to count
A - 15 Items
B - 10 Items
C - 5 Items
I am unable to find a way to automate this.
Any suggestions (besides buying other count software?).
Sr. Microsoft Dynamics GP Applications Consultant
Certified Microsoft Dynamics GP Specialist
I don't think so Jim. The assumption behind cycle counting is that
you'll count all your inventory at least once annual...2 questions regarding count formula
If I have the following data
A B C
1 Personnel group type p't number
2 Melinda 1 4
3 Sean 1 5
4 Melinda 1 6
5 Sean 2 30
6 Fay 3 8
7 Melinda 1 32
1. How shall I contruct my formula to count the number of data that satisfy
the following criteria:
1. personnel is Melinda
2. group type is 1
I have a report that I have been emailing help on with you guys. Everyone has
been such a great help. My report is a 12 month rolling report, which is
based off of a crosstab query. I need a field called count. This will count
what months have data in them. So for example:
Item Mth1 Mth2 Mth3 Mth4 Mth5 Mth6 Mth7 Mth8 Mth9 Mth10 Mth11
12 2 0 0 0 0 3 3 6
2 0 6
The count being which months are > 0. Do I create this in my query or better
off in my report?
Thanks in advance
Message posted ...Count occurrances with conditions
I am trying to count in 3 columns. Column A will have entries of "B
or "S" and columns B and C will have "1" or "0".
A B C
B 0 1
B 1 0
B 1 1
S 1 1
I want to count how many times column C has a 1 with a B or S. That i
no problem, I can do that. I also want to count the number of time
column B has a 1 with a B or S. That is no problem, I can do that.
However, the third count I want to count is when a 1 appears in bot
column B and...Counting colored cells
I need to count the number of rows (or cells) that are are
a particular color. ex: How many cells in column A are
You need a VBA function to do this. See the CountByColor function at
Microsoft MVP - Excel
"Daniel" <firstname.lastname@example.org> wrote in message
> I need to count the number of rows (or cells) that are are
> a particular color. ex: How many cells in column A are
Is there any simple way to get total(recursively) subfolders from any
I know how to do it using CFileFind.
But I hope there maybe simpler method.
I use ::FindFile, but it isn't any easier, it just allows for larger file
sizes. It's pretty easy to write a recursive routine that counts the
folders. Send me a private email and I'll email you a routine I use. I'm
not at my work desk right now so I can't get to it until the morning.
"Joonho Ryu" <email@example.com> wrote in message
> Is there ...