Combo box list selection based on earlier selection by user
I have a form that has a combo box 1 (Product) that reads a the Product
table and has a unique id attached to each product (RO#). There is a second
combo box 2 that is RO#. Now what I would like to do is when a user selects a
Product in combo box 1, the system should lookup the Product selected from
combo box 1 and upload the corresponding RO# in the combo box 2 list. Now I
am using both combo boxes as Unbound and in the combo box 2 I have the two
columns Product and RO# - in the Criteria row of RO# I have the following:
Like IIf([Forms]![xa_f_lookup]![RO#]=" ",[Forms]![x...Run report on multi selected records.
I try to make a report for a custom entity that works like the Account
Summary: let's say that it's Customer's Inquiry Summary for entity Customer's
I made the report so that I'm able to run the report on Customer's Inquiry
But when I select multi records in the list of Customer's Inquiry and run
report, only one record is show in one page of the the report.
I would like to have the selected records appear in the report with each
record on each page.
How can I do this?
...Why do I see two emails being sent instead of one?
If I have a single email in my outbox, then hit send/receive, I always see
"sending 2 of 2 emails" in the bottom right corner. My sent box shows only 1
has been sent. I'm just puzzled about why it shows 2 being sent when there is
Thanks for any explanations or suggestions!
I would suspect you have a stuck read receipt:
"mb" <email@example.com> wrote in message
> If I have a single email in my outbox, t...More than one attribute.
you can write
in your code for,
how do you write,
for two attributes?
> you can write
> writer.WriteStartElement("data", "http://www.w3.org/1999/XMLSchema-instance");
> in your code for,
> <data xmlns="http...When shading cells using the 'pattern' option, they print in grey.
When trying to print a 'pattern' in cell shading, it prints only as
grey-scale solids. Do the patterns not print, or is it "averaging" the
pattern into a solid? Printer dpi is 600, and appears as a pattern on
...Two Logins With One Bank
I purchased Microsoft Money 2005 Deluxe with the hope that most of my banks
had been added to make my life simpler.
I noticed that the new program works with Capital One bank/credit cards, but
I am having a problem getting it to work.
Unlike MBNA, if you have more than one credit card with CapitalOne you have
to log into their website with two different log ins. I got Money2005 to
connect and update/download my transactions for one account, but I cant seem
to find how to tell it to use a different log in name/password for the 2nd
Has anyone else come across this problem and ...Can't select objects in Excel 2007
I'm trying to create a form in Excel 2007, and although I can manipulate,
copy & paste controls (check boxes, etc)
I can't select multiple objects to align them, etc.
I've checked on-line help (and have followed the instructions), and other
websites, but no one seems to have indicated a problem.
It is extremely cumbersome and I need a solution. Any ideas?
Thanks in advance,
I know this is about a year too late, but it may help others who have stumbled across this page looking for similar help.
On the Home tab, in the Editing group, click Find & Select....Lot Selection not Showing when I select PO on Receiving Entry
Usually, the Lot selection screen would pop up when I select a PO at the Line
Detail of the Receivings Entry, now it does not! And GP will let items post
without a lot number! It seems as if a setting has changed. Any ideas
Any help is appreciated.
Are you sure the item is marked to track lots? This wiould be set item by
item on the Item Maintenance Options window.
Richard L. Whaley
Author / Consultant / MVP 2006-2008
Documentation for Software Users
Get our Free Tips and Tricks Newsletter and check out our books at
&q...Select contact then hangs
Hi, please help. I have a user that when she selects a
contact using To: in a new email, after selecting 2, it
closes outlook??. Spec is W2kSP4\office2k with all
windows updates and office updates installed. Profile has
been deleted and re-created, plus i have set up personal
folders and moved contacts into there, and set that
folder as a default, but makes no difference.
...how do I identify an unfamiliar symbol in an excel cell
The symbol underlined r has appeared in a cell but I cannot get rid of it
Strange stuff in a cell might be some kind of picture or other object. Place
the cursor on the "thing" and right-click. See if clear or delete shows up
as an option.
> The symbol underlined r has appeared in a cell but I cannot get rid of it
is it a symbol or a broken link refference... check insert symbol
MDOTJR's Profile: http://www.excelforum.com/member...Multiple Attributes
I have created a custom Entity - "Inventory"
This has a relationship with Accounts which is used to show the location of
a piece of hardware - a lookup field is used to choose an account. All good.
However I'd also like to have a couple of other lookups for Supplier and
Manufacturer. These are both stored in Accounts so they'd need to reference
an entry in Accounts again.
Is this possible? I know you cannot create multiple relationships between
entities but can you create multiple attributes using the one relationship?
Can anyone help with this - still got no further.....Giving a duplicate cell a number
say in column A i had a cell which had "Horse" in it , and it said
"Horse" in randown cells in column A , what formula could i use in
column B so that everytime it recgnised "Horse" in cell A is would
give it a unique number
ie Horse featured in cells
So in the coressponding cell in column B it would have 1,2,3,4 etc
A1 = HORSE B1=1
A4 = HORSE B4=2
A7 = HORSE B7=3
Thanks for any help
scottymelloty's Profile: http://www.excelforum.com/member.php?action...Downloaded Transaction from One Payee not showing
Recently I noticed that when I download my back statement that transactions
from Toys "R" Us are not showing up in my register. I have check the ofx
file and the transaction is there. I have not noticed this behavior with any
other Payees. I have tried deleting Toys "R" Us from the payee list, but it
has not helped. Any ideas?
bump, any help?
In microsoft.public.money, Alon wrote:
>Recently I noticed that when I download my back statement that transactions
>from Toys "R" Us are not showing up in my register. I have check the ofx
>file and th...Selecting rows from various sheets
I have several sheets with a few columns in each. One colum
in each sheet has a unique value. Most of these unique values are th
same in each sheet but not all. Is there any way that I can set up
new sheet that will have the unique value in column 1 and th
corresponding column values frommeach sheet beside it. For example
aa 1 1 1
bb 2 2 2
cc 3 3 3
aa 4 4
cc 5 5
aa 1 1 1 4 4
bb 2 2 2
cc 3 3 3 5 5
shav's Profile: http...buggy cell miscalculates SUM function
Cell B19 does not SUM the preceding 5 cells correctly. It gives a valu
of 9 when it should be 42.
The problem might be with cell B16, which it seems to pass over.
Attachment filename: calwin foster care training analysis - demo.xl
Download attachment: http://www.excelforum.com/attachment.php?postid=58266
Message posted from http://www.ExcelForum.com
Try formatting that B16 cell as General and then reenter the value.
(excel may have been seeing your value in B16 as text)
"lindasf <" wrote:
> Cell B19 does not SUM the preceding 5 cells corr...Referencing a referenced cell
Sheet1!C4 contains the formula =Sheet2!A1
I want Sheet1!D4 to find out what cell Sheet1!C4 is referencing an
then return the value two columns over. (Offset will take care o
returning the value two columns over). My problem is I need to kno
which cell Sheet1!C$ is referencing. If I use the formul
"=OFFSET(Sheet1!C4,0,1)" I get the value from one column to the righ
of Sheet1!C4, I need the value of one column to the right of the cel
being referenced by Sheet1!C4, (Sheet2!A1) How would I do this.
Message posted from http://www.ExcelForum.com
see your post in Excel.mis...select text in Calendar
I'm working on a calendar in Publisher. I'm adding text into a cell by
spacing down 1 point, then typing in 8 points. Doing fine until April. At
that time, I can only select cells (whole days). It will not let me select
the text. Help is no help. Any hints out there. Did I accidentally select
something to do this?
Have you added a picture to the cell or a shape? If you have send it to the
back, make the cell no fill and try again.
Mary Sauer MSFT MVP
"GoBonnieGo" <GoB...Excel 2000
I used to have this option by right clicking and selecting split. However i
don't have it now. I had it on WIN2000 and now I have XP proffesional
not possible in Excel
"Roy S" <Roy S@discussions.microsoft.com> schrieb im Newsbeitrag
> I used to have this option by right clicking and selecting split.
> don't have it now. I had it on WIN2000 and now I have XP proffesional
I bet you're thinking about a table in MSWord????
Roy S wrote:
&g...How to switch Office Enterprise 2007 from one computer to another
I recently bought a new computer. I have Office Enterprise 2007 loaded on my
old computer. When I tried loading the product onto the new computer it said
I had maxed out the number of computers I am allowed. Question: How do I
get the "authorized" software off my old computer (which is being trashed
once I do this) and get it on the new computer?
You get all the documentation that came with your HUP of Office 2007 Enterprise
along with the info that was given to you from the Company where you purchased it
and use the phone as per below
Here you will find the Phon...x-axis range
How do I get the x-axis to be a range of "values" instead of "categories"?
I am trying to do a line chart with values over a % range, but I do not have
values evenly spaced over the entire range (The chart is asymptotic and I
only need to see values from 0 to 40 or so) e.g.:
I get the X axis evenly spaced in 8 categories. Seems like older versions
of Excel (I am using Office XP/2002) allowed me to set the range and
divisions within the range. How do I handle this now?
...macro to filter data based on selected data
Hi, I am looking for a macro that requests input of a reference code and then
a date and then filters the data in my spreadsheet based on this criteria. I
am using excel 2007. Any help with this will be greatly appreciated.
You can probably record a macro while doing it manually and then clean it up
and add input boxes to ask the question or input your variable in a cell and
use that. If all else fails,
If desired, send your file to my address below. I will only look if:
1. You send a copy of this message on an inserted sheet
2. You give me the newsgroup and the ...Link select with a blast
I have Win 7 Home Premium, x64. Quite often, when I select a link, a mouse
pointer changes to a palm with a blast. I understand, the palm is the
standard mouse pointer for link select, but what is the blast? What it
Fort Myers, Florida
I suspect that this is being caused by a tracking program.
Run something like Ad-Aware and see if it indicates a tracking company.
If so, you can delete it, however, it might prevent you from accessing that
"Ilya Zeldes" wrote in message
news:7A6FF9B1-5512-44...Need help pulling data from cells in different workbooks
Hi, let me try and explain this the best I can:
say i have a workbook with 2 pages, on the first sheet, in cells C27
C47, C67 and C87
on the Sheet2, I want to make a list. in that list contains data fro
cells C27, C47, C67 and C87 from Sheet1 . on sheet2, the list wil
Is there any easy way to pull that data without doing each lin
individually. I know i can put in the = and pick the cell on the othe
sheet, but I have 100's of cells I need to get data from. If i try an
copy paste each line, it does...Select Case in a Change Event
I am trying to use a worksheet Change Event to trap changes to specific
columns. depending on which column is chnaged by the user, the value in
another ciolumn will be altered; so, changes in either column O or P will
update column Q, changes in either column T or U will update column V and
changes in column Z or AA will update column AB.
What I can't figure out is the Select Case bit (where I've got the shouted
question below). Here's what I've put together, any comments would be much
Private Sub Worksheet_Change(ByVal Target As Range)
...Select Records based another table...
This may be very elementary, but i can't wrap my brain around it. I have
tried to dummy it down as much as i can for myself, with plans of adapting it
into something working. I have three tables that look like the following:
ProdID A B C
1 $1 $2 $3
2 $4 $5 $6
3 $7 $8 $9
[tbl1 ProdID] ------ [tbl2 ProdID]
[tbl2 RmNum] ...