I have an active website for my business. I built it in Frontpage 2002.
It no longer will send email through the settings I used ( Reservation
form) and I cannot get it to take any of the settings I give it. I do not
think that my knowledge is sufisticated enough. And, I don't think that I am
entering the information completely enough.
I am using a simple form with a single enter button.
Can you help?
May be possible.
Microsoft MVP Expression Web
"FrontPage 2002 on windows XP"
<FrontPage200...Convert old publisher 2.0 file for Publisher 2000 and beyond
I created a text/graphic book in old publisher 2.0. Never progressed
through later versions and Publisher 2000 won't open. Any ideas?
The good news is I found 2.0 in the attic and installed her and she
runs fine under XP.
Everything I put in my attic melts... I did find an old AppleII+ banking program
that booted right up. It has been the attic for years, it isn't 2000 compliant
Can you open the file in 2.0? Do you have Norton? Disable script blocking and
Office Plug in, then try again.
If you still can't open the file send the file to me and I will convert it fo...deleting entire rows with the same cell value in the first column
I have an huge table in which there are lots of rows that have the same
value as the one in the row before:
How can I delete them leaving this way only one row per value without
searching for them and deleting them manualy?
Any help welcome!
Pedro, assuming your data starts in a1, in b1 type =if(a1=a2,"Y","") and copy
down for the length of your data. Then filter on Y and delete all those
Sincerely, Michael Colvin
"Pedro F." wrote:
> I have an huge table in which there are lots of rows that have the same
Here is what I want to do:
If a cell (formatted as number) is between 0 and 10 multiply it by this. If
it's between 10 and 20 multiply it by that. How do you write that?
1 this that
3 15 =IF(A3<10,A3*A1,IF(A3<20,A3*B1,"Huh?"))
Or you can just put the multipliers into the formula itself, replacing A1 &
B1. The last "Huh?" just lets you know that the input variable was over 20.
> Here is what I want to do:
> If a cell (formatted as number) is ...Auto populate a form form an open form
I have a main form with customer names and addresses and would like to
add a control button on this form which opens up another form which is
used for recording telephone calls on. What I have been trying to do
is auto populate this call log form with information from the main
form ie name and address?
Please don't re-post the same question twice. You have to be patient and wait for a
reply. Responders are volunteers, and you may not get an answer right away.
Posting twice causes some people to respond to the first post, while others are ...Out of Office Replies #2
We currently do not allow "Out of Office" replies anywhere other than our
exchange org. I recently saw an Out of Office reply which was sent by the
email@example.com on behalf of Jane Doe.
I think this is a great idea so I went searching for a "how to" and found
nothing. Anyone have any ideas? Exchange 2003 doesn't do this out of the
box does it?
Nope - nothing right now.
Once Exchange 2007 is out, you'll be able to have all sorts of custom rules,
and you'll be able to define different Out of Office replies for internal
and external recipients...form pozition on screen
I would like to find form position on screen.
It's similar to DoCmd.movesize, but I want discover "parameters' for form
(left corner, top corner, etc)
Are you saying that you want to find out what the current position IS?
If so, you can use something like this:
MyFormLeftVariable = Me.Left
MyFormTopVariable = Me.Top
MsgBox "My Form is at " & MyFormLeftVariable & VbCrLf & MyFormTopVariable
Or however you want to use it.
Access World Forums Super Moderator
Utter Access VIP
Tutorials at http://www.btabdevelopment.com
___________...highlighting rows is there an macro for this
I have columns from A1 to A300 TO CP1 TO CP300 if I click on a particulr cell
on any row is it possible to high light that whole row if there is a way
please tell me how!!!
See some choices in your other post in Misc.
"Mike" <Mike@discussions.microsoft.com> wrote in message
> I have columns from A1 to A300 TO CP1 TO CP300 if I click on a particulr
> on any row is it possible to high light that whole row if there is a way
> please tell me how!!!
...copy properties Under forms
I'm wondering if someone can help me with something on copying properties.
I've checked the access help but can't find anything there.
This is what i want to do.
I'm copying text boxes, labels that has caption, name and other information
in the properties that i want to keep when i copy the information to another
tab on a form.
Is there a way i can copy the property information without doing alot of
manual work by going into each text or label box.
I hope this makes sense.
thanks for you help in advance.
When you copy a control, everything about the cop...What is the purpose of 'Dummy' window in the Command forms
I am wondering why GP has Dummy window with title "~internal~" for the
Command forms. For example Command_Financial form has Dummy window
Do I need to create Dummy window for my Command forms. If so why I need it.
Any comments appreciated!!!
The Dummy window is there as a placeholder. It really doesn't do anything,
but should be there in order for the form to work properly since your form
needs to be open for the commands to be available. The title ~internal~
just prevents this window from showing up in the Security assignment
windows. Make sure that...Unique Records #2
Hoping someone might be able to help.
I currently use the formula
=IF(SUMPRODUCT(($A$2:$A2=A2)*($C$2:$C2=C2))>1,0,1) from the Contextures
website to count unique records in data sets, where a record is
repeated in two or more rows. I create an additional column as
required, and use this field as my count data. Works a treat.
However I now have a large dataset (400000 records) for which this is
incredibly slow and painful. Is it possible to create a macro to do the
same thing, and if so how do I do this and will this speed things up?
Thanks in advance.
I have a list of item codes in column A and a list of item codes i
column F and I need to know which item codes appear in both columns
Can someone please tell me the best way to get a list of the item code
that appear in BOTH of the columns.
Message posted from http://www.ExcelForum.com
> I have a list of item codes in column A and a list of item codes in
> column F and I need to know which item codes appear in both columns.
> Can someone please tell me the be...Cannot open the Insert object (Pdf file) form Excel 2000(9.0.8968 SP-3)
I am no idea why I cannot open the embedded object (Pdf file) inside Excel
file which using Windows ME.
Once clicked the object icons, then it shows the error message likes
" the embedded object cannot be opened by the source application"
I used the Adobe reader 6.01 as the source application.
Actually, I searched the related forum from the Internet. However, I cannot
solve the problem.
I can't test 2000 in ME, but it works fine in 2003 under XP.
If this helps, please click the Yes button.
&q...Clip Art Gallery #2
Operating System: Mac OS X 10.5 (Leopard)
I recently Office 2008 for Mac. It has been a little buggy, but overall, it has worked great. I noticed one day when I went to open the Clip Art Gallery in Word, Excel and PowerPoint that there was a problem. I get the following error message from the Office program:
Word/Excel/PowerPoint cannot launch Microsoft Clip Gallery. Microsoft Clip Gallery may not have been installed properly on your computer, or may not have enough memory available to launch Microsoft C...Form class module for non-existent form
After copying a form with a class module, something went wrong. I now
have a class module for the new form, but the form no longer exists. I
am unable to remove the in-limbo class module. I want to use that name
for my form, which is not possible as long as that class module is in
How do I get rid of the in-limbo class module?
I've tried repairing tha DB as well as "msaccess /decompile" but it
A class module is not part of a form, but a separate module. It sounds like
your 'in-limbo' module is...Setting the Windows Cursor during Form Processing
I would like to force the mouse cursor to immediately become an hourglass
when some long processing/quering commences on a form. it appears that it
takes some time for Access to show the hourglass and usually only after the
user clicks the form a couple of times because there appears to be nothing
Is there an easy way to do this from within Access..
I have done it in VB6 using Me.MousePointer = vbHourglass but this does nto
work in Access.. any suggestions?
Screen.MousePointer = 11
guess this does it?
"jeff" <jeff@work...Position 2nd Form according to 1st Form
I have 2 Forms. When the 1st Form is openned and want I open the 2nd Form, I
want it to position itself about 15cm form the Left and 20cm from the top of
the 1st Form. I am using Access 2003, Thanks.
"AY" <AY@discussions.microsoft.com> wrote in message
>I have 2 Forms. When the 1st Form is openned and want I open the 2nd Form,
> want it to position itself about 15cm form the Left and 20cm from the top
> the 1st Form. I am using Access 2003, Thanks.
You should be able to use Nicole Calinoiu...Link to last entry #2
Well thanks for this, it has opened up the whole new concept of array
formulas for me. As a novice, however, I seem to be doing something
I have carried out the follwing steps;
Entered a number of values in column A
Entered the formula in Cell B1 and pressed CTRL-SHIFT-ENTER
I then get message saying that the formula contains an error
The part of the formula A65535"" is highlighted (I found it would
accept the formula without these two quotation marks - but of course it
does not return the right value)
Is it possible to tell from this what I am doing wrong?
Thanks in adva...TOURNAMENT FORMS
Need tournament draw sheet single elimination template.
You may find some old NCAA basketball tournament forms out on the web.
> Need tournament draw sheet single elimination template.
...CRM Licences #2
It has become apparent since installing CRM 4 that we also need CRM 3 due to
some of the systems that we have integrating with it and the need for mobile
users to be able to access the system from a PDA.
I have used a seperate server and installed CRM 3 and used a 10 user
licence. I need to add more licences to the server so my question is how do
I do that, where do I get licences from and what type of licences do they
need to be?
Sorry that was 3 questions.
Thanks in advance
Contact Microsoft Volume Licensing. You can probably purchase a ver 4 CAL
and recieve a Ver 3 along w...Run Macro only if certain form is open
I have programed a maco to open one of various forms depending on criteria on
an open form. Is there a way to run a "follow up Macro" based on which form
opens? In other words can I run a macro based on wheather a certain form is
Take a look at the RunMacro Method of the DoCmd object. You can have it as
part of the OnLoad of the form in question.
>I have programed a maco to open one of various forms depending on criteria on
>an open form. Is there a way to run a "follow up Macro" based on which form
>opens? In other w...Modal form opens on startup
I hope this doesn't come across as stupid, but I'm almost completely
unfamiliar with Access. A client of mine has an Access 2000 database
containing some business information, and he'd like to have me import
it into Quickbooks. The problem I have is that I cannot get to the
information to export it from Access.
When the file is opened, I get a (I presume) modal form, configured as
a 'splash screen' type of thing. Has my client's logo, and the name of
the fellow who wrote the Access app.
Click that, and it closes, then opens another form for...Forms and Input Data
I created a report form on Sheet 1 and a set of input data on subsequen
Sheets 2, 3, ... link to the report. The report is to show informatio
on either of the data I select.
Are there simple steps for me to pick either set of data I want t
display on the report? I've thought of a pull-down menu so that if
select "1", the report will show data set "1", and so on. Yet I don'
know how to do it. I tried the "replace" command by highlighting al
the cell in the Report sheet then type "2" in place of "1" to replac
the data set then hitting...Trying to delete form border, and it deletes all borders
I made a form with several individual areas that have borders. At the end I
decided to try a border around the whole form. Now that I don't like it, I
was trying to delete the form border, but it deletes all the borders in the
form as well. How can I just delete the border around the form and not the
rest of the individual borders? I'm actually on a different computer,
because of the printing, will I be able to undo my way out of it maybe, or
do I have to be on the computer where I made the form. One more question,
will the form retain the undo feature for ever, or will it stop ...Any way to color code subject lines?
Is there any way to color code subject lines, automatically or
On Sun, 22 May 2005 13:50:19 -1000, Bill <firstname.lastname@example.org>
> Is there any way to color code subject lines, automatically or
Automatic formatting. I can't be more specific without knowing what
version of Outlook you have. Check Help.
Ben M. Schorr, MVP-OneNote/Outlook
Stockholm/KSG - Honolulu
Microsoft OneNote FAQ:
Bill <email@example.com> wrote: