How to Convert UTC to localTIme(C# )
I have got the value of user account's lastlogon time. Its type is Int64.
This value is stored as a large integer that represents the number of 100
nanosecond intervals since January 1, 1601 (UTC)(Refer to MSDN).
I don't know how to convert this value to localTime.
The following is my code.
DirectoryEntry deUser = new DirectoryEntry(ldappath);
DirectorySearcher src = new DirectorySearcher(deUser);
src.Filter = "(&(objectClass=user)(SAMAccountName=" +
accountNa...Convert text to time value
I have a series of time values in a 'General' format. They are of the
Which is 18:45:25 or 6:45:25 pm.
A time which is am would be of the type:
Which is 1:23:45 am.
Is there a way to convert those 'General' values to an Excel serial so
that I can figure out the difference between two times? I've seen a
bunch of examples on the net, but none of those that I have found deal
with this format that I can tell.
"Andy" <email@example.com> schrieb...how to convert date
I'm looking for some method to convert mail date, in format:
eg. "Sun, 18 Sep 2005 20:57:08 +0200", to computer local time.
I tried CTime but without resoults.
Have you tried COleDateTime::ParseDateTime()?
> I'm looking for some method to convert mail date, in format:
> eg. "Sun, 18 Sep 2005 20:57:08 +0200", to computer local time.
> I tried CTime but without resoults.
>I'm looking for some method to convert mail date, in format:
>eg. "Sun, 18 Sep 2005 20:57:08 +0200&qu...Excel: Auto converting text to numbers
I am downloading an Excel sheet, and the numbers come in as text. It
basically comes in as "33 %" but Excel registers this as text, not a
I have a cell that will be used to add the numbers, but since they are
text it doesn't work.
Given this information, is there a way to convert the imported data
into numbers. I would prefer to include this into my formula. The
potential numbers are:
0, 1, 2, 3, 4, 0 %, 25 %, 33 %, 50 %, 67 %, 75 %, 100 %, and N/A
I would prefer a function, again if possible, that could convert any
number. Please note, the space between the nu...How do I convert dates to text keeping the format?
I'm trying to convert a column of data in date format *m/d/yyyy to a text
format without converting to serial numbers. Ie: I want to retain the
mm/dd/yyyy format. Is there a way to do this?
"sprlarry" <firstname.lastname@example.org> wrote in message
> I'm trying to convert a column of data in date format *m/d/yyyy to a text
> format without converting to serial numbers. Ie: I want to retain the
> mm/dd/yyyy format. Is there a way to do this?
That ...how to convert excel's .cvf file to .csv file
...Convert Access97 to 2000
Hello, we're currently running access97 and would like to convert it to
2000, but we don't know what is the administrator password for this
database. Also this database is running on multi user and have difference
permission for diffence users. Could someone help me how to do make this
happen but keep the currently permission retaint. Thanks
...Convert 2000 Calendar to web page
When I convert my calendar for 2005 to a webpage, the page is off by 1 day.
Is there a template or fix available to fix this?
I can edit the html file but this should not be the case. Fixes?
Suggestions...other than use Apple?
"Duane Perry" <email@example.com> wrote in message
> When I convert my calendar for 2005 to a webpage, the page is off by 1
> Is there a template or fix available to fix this?
I have a set of fields that are structutred something like:
A B C
1 one unique data 1
2 one unique data 2
3 three unique data 3
4 two unique data 4
5 one unique data 5
6 three unique data 6
I have no way of knowing how many times each of the non-unique values in
column B will occur, nor which order they will occur in.
The unique data sets (column C) may be blank cells.
What I want to do is use a VLOOKUP type function to combine the unique data
sets into...XML Note convert to DataSet
I have this function:
object acmResponse = acmLogin.acmString("4001", "", paramFormLogin +
paramUserBasics);System.Xml.XmlNode acmNodes =
What I have todo, to convert the XML Object in the DataSet Object?
...Problem converting from Quicken to M2005
My Quicken files are mostly investment related, and generally
converted fine. However all bonds (regular and muni's) converted as
Investment type: Mutual Fund, not Bond. (1) How do I prevent that, (2)
How do you change the Investment Type for an item? Thank you.
In microsoft.public.money, Mike wrote:
>My Quicken files are mostly investment related, and generally
>converted fine. However all bonds (regular and muni's) converted as
>Investment type: Mutual Fund, not Bond. (1) How do I prevent that, (2)
Money typically converts custom data types from Quicken into funds.
Is it possible to convert a Money file created in the USA version to that of
the UK version?
Thanks in advance
The general way is QIF Export then Import. It's involved and has limitations
like loan accounts don't QIF. See http://www.bollar.org/msmoney/#Q1.
"Crispy" <firstname.lastname@example.org> wrote in message
> Is it possible to convert a Money file created in the USA version to that
> the UK version?
...Numbers converting to decimal
I a trying to figure out why when I type 11 and
automatically converts it to .11, if I type 11. it will
stay 11,if I change all the cells to text then back to
number they willstay.
I have checked the formatting of the cells, it even
happens when I open a brand new worksheet.
Tools>Option>Edit, uncheck Fixed Decimal
Microsoft MVP - Excel
"DawnP" <email@example.com> wrote in message
> I a trying to figure out why when I type 11 and
&...Converting Quicken 2004 to Money
Quicken 2004 has many bugs, and I have had it. The most
recent being that it doesn't work AT ALL now that it is
the year 2004. I have had to change the date on my
computer today to open it. I want to get Money instead,
however I do not know if Money can get my data from the
2004 version. Does anybody know for sure?
Yes is the answer to the question you posed. No is the answer to the
question you are getting to but didn't pose. M04 imports Q03 and earlier. If
the past predicts the future M05 will import Q04.
"Colin" <firstname.lastname@example.org> wrote ...Chart Axis
I have a report with 2 charts on it, both in the same section footer. this
then produces approx 40 sets of charts based on my data (2 charts for each
category). Each chart has 2 Y Axis. Most of the charts have a suitable
scalling on both axis, however on 6, the 2nd y axis always starts form 0,
when I require it to start from a much higher value. I have checked the data
and that is correct, can you force access to reset the axis on each chart as
it produces them - or is this a bug?
You can set the minimum value for the secondary y-axis by using code such
as this in the Format...Converting from AOL to Outlook
Is there an efficient way for me to convert my AOL address book over to
Before I buy Outlook, I want to be sure I cam make the conversion without
loosing the large address book I have on AOL.
"Herb Clader" <Herb Clader@discussions.microsoft.com> wrote in message
> Is there an efficient way for me to convert my AOL address book over to
> Before I buy Outlook, I want to be sure I cam make the conversion without
> loosing the large address book I have on AOL.
AOL's help p...Customizing "Convert Campaign Response"
We have created custom Fields in the Campaign Response entity that we would
like to populate on the Lead Entity when we do a conversion. However it
doesn't seem like this is possible from the Data Map. Is there a way to
modify what fields are carried forward during a conversion, or do I need to
find a different method?
Thank you in advance.
As I had some time left, I tried to figure this one out. To my surprise I
can't find ANY direct link between a converted campaign response and a new
lead. There is only an indirect link, through the campaign entity. But that
does not ...Problem with AFX_THREAD_STATE class converting from VS6.0 to VS.NET 2003
I have inherited some code that works in VS6.0. It has code snippets like
_AFX_THREAD_STATE* pThreadState = AfxGetThreadState();
pThreadState->m_nLastHit = 0;
_AFX_THREAD_STATE* pThreadState = AfxGetThreadState();
CToolTipCtrl* pToolTip = pThreadState->m_pToolTip;
It then does things with these values. In VS.NET, there is no member
variable in _AFX_THREAD_STATE that corresponds to m_nLastHit or m_pToolTip.
Have these been replaced by something similar in VS.NET 2003 that I can use?
#if (_MFC_VER < 0x0700)
_AFX_THREAD_STATE* pThreadState = AfxGetThrea...Convert English language document to Hindi
Is there any software available to convert an English language text document
to Hindi language document by using dictionary based translation (not
The sentence : My name is Joseph
Should be converted to : ???? ??? ????? ??
...Converting Hours an minutes just into minutes #2
Is thier a formula to use to change hous and minutes, just into minutes ex:
01:30 (1 hour and 30 minutes) into 90 minutes. And how do you format the
Select the cell and change the format to:
"Six Sigma Blackbelt" wrote:
> Is thier a formula to use to change hous and minutes, just into minutes ex:
> 01:30 (1 hour and 30 minutes) into 90 minutes. And how do you format the
> Thank you
...converting chart to spreadsheet?
how can i revert back to my spreadsheet from a chart?
You mean you have a chart but don't have the data it was created from? This
article in the Microsoft knowledge base describes a macro that will extract
data from a chart.
Jon Peltier, Microsoft Excel MVP
Tutorials and Custom Solutions
"excel chart" <excel email@example.com> wrote in message
> how can i revert back to my s...graphics converter not working
I am using Publisher 2000 to create a newsletter. It has been going well but
now that I'm ready to insert pictures from files, it won't work. I get the
message saying that Publisher can't convert this picture (it's either that it
doesn't recognize the format or there was an error installing the graphics
converter and to go to to Start > Control Panel > Add/Remove Programs >
Highlight the Publisher
program and choose "Change". When prompted, choose "Add Features". Then be
sure to select to run ALL from your computer so that everything is...Convert VC6.0 CString::Init() code to VC7.1.
How to convert the following code to VC7.1?
// Need to declare a descendant of CString to allow access to the Init()
class CStackString : public CString
CStackString & operator=(CString const &s);
CStackString & operator=(CStackString const &s);
using CString::Init; // Make public
inline CStackString & CStackString::operator=(CString const &s)
inline CStackString & CStackString::operator=(CStackString const &s)
class CStackValue...Converting Lotus 123 to Excel
Is there a staightforward way of converting Lotus 123
worksheets to Excel 2000 without using any third Party
Apps and without losing any of the Formula functionality
from 123 ?
"Paul Duane" <firstname.lastname@example.org> wrote...
>Is there a staightforward way of converting Lotus 123
>worksheets to Excel 2000 without using any third Party
>Apps and without losing any of the Formula functionality
>from 123 ?
..123 files? There are only 3 pieces of software that do anything with them:
Lotus 123 itself (32-bit versions), Quattro Pro 10, and DataViz's
a few years ago I did all my proposals in Apple. Now I
want to retrieve some of the data using my Dell and
Windows tells me the Apple 31/2 floppy is not formatted!
anyone know of a conveter so I can open these floppies?
Can u not open these up with a (borrowed, hired or purchased) Apple then
eMail / upload those files over the Internet to whatever you need?
"WOT231" <email@example.com> wrote in message
> a few years ago I did all my proposals in Apple. Now I
> want to retrieve some of the data using my Del...