Got the error when change password via OWA ....
Just finished the configuration of enable change password funcation in OWA,
but got the "error : Transfer one invalid directory path !" when wanted to
change password. Exchange 2003 running on Windows Server 2003 with SP1.
Any body can help ??
...Cannot Access File Incorrect Password
Hi, my money file is stored on an external hard disk. I have tried to open
it after entering the password it states 'Money has detected that you did not
close the file "Money 2009" before exiting. Money now needs to verify the
information in your file. If your file is large this may take a few minutes.
Do you want to do this now?'
I click on Yes, and it starts performing this but after the progress bar
gets so far I get an error 'The Password you entered was incorrect, please
try again' - I know the password is correct as if I entered it wrong, it
would have...how do i move an image on a sheet
I Have an image on a sheet which i want to have moving from left to right
while the sheet is being viewed when cell B4 has "Please wait" in it.
Well, I got myself into a jam ... working with a nine sheet workbook and
for some stupid reason I password protected one of the sheets and can't
The silence on this one is deafening ... You can hear a pin drop.
I finally got the pwd straight and am now back in business. Lesson
learned: No more pwd's when protecting unless they are going somewhere
where you have no control..
On 1/31/2010 4:08 PM, Jethro Pull wrote:
> Well, I got myself into a jam ... working with a nine sheet workbook
> and for some stupid reason I password pro...Password Protect a FOlder
Is there a way to password protect individual folders in Outlook?
There is not a way to password individual folders in Outlook. You can only password protect the entire .PST file.
Scott Atkins MCSE, MCSA
Partner Technical Lead - Outlook
Microsoft Technical Support
for Platforms and Business Applications
>From: Ron Boetger <email@example.com>
>Subject: Password Protect a FOlder
>Date: Wed, 13 Apr 2005 11:05:43 -0400
>X-Newsreader: Forte Agent 2.0/32.652...Formatting unprotected sections
I'm currently working on a template (.dotx) for Word 2007 where I want to
protected several sections with the 'Filling in forms' protection. So far
it's ok - but in the unprotected section I'm unable to use things like
'Bullets' and 'Numbering' - why is this, and mere importantly how do I solve
Any help would be greatly appreciated
As you are using Word 2007, consider using Content Controls rather than
formfields. Alternatively, use a UserForm (Custom Dialog) to get the user's
See http://gregmaxey.mvps.org...Unprotecting what Excel says is unprotected ???
Good evening all the peeps of the Excel Community.
This one has me completely flammuxed but hopefully someone can spot my
obvious error that I can't ...
I have a workbook with 26 sheets. At some time, I know I password protected
it ... somehow. Each time I open my workbook, it asks me "xxx.xls' is
reserved by Joe Bloggs. Enter password for write access, or open read only."
I have been through each and every one of the 26 sheets using Tools -
Protection to unprotect but none are protected, nor are any Workbook
My only guess is that at some stage,...Multiple sheets
I have several workbooks with a sheet in for each day (W1Mo etc) which all
link to a daily totals sheet in a seperate workbook. What I've done is
named the total figure cell in each column and then linked that to the daily
sheet, but I have approx 120 named cells per workbook. Is there an
Why are you using named cells? This will take longer to set up than
normal cell references.
On Jan 25, 10:01=A0am, "Wendy" <we...@sunnygirl.com> wrote:
> I have several workbooks with a sheet in for each day (W1Mo etc)...Taking a cell from sheet 2 to sheet 1 (newbie here)
I am very new here and just joined the forums. I wanted to as
how to take information from a cell on sheet #2 to sheet #1. There ar
going to be many instances with the workbook I am making of doing this.
I just have yet to figure out how to make this happen. Also if i
helps at all the �digit� that will be in the initial cell (being copie
from) is going to be from a function of some sort ( ex: D4 x D8 )
Thanks for any and all answers. If this sounds confusing just ask i
the thread. Also if I happened to post this in the wrong part sorr
and bare with as I am new. Thank You ...excel vba
I have set up my sheet to protect using a password name login which the
runs the macros. It is set up so that the sheet's cells cannot b
edited, but the person can copy/paste the info onto another sheet.
This is a problem because there are hidden cells which contai
sensitive data. Any ideas
Message posted from http://www.ExcelForum.com
Hi, just a comment that i just found out, check out this
link that I was refered too. That password that you
setup doesn't do squat when you have access to this...
I was mad when I saw this, when mean...Filter on sheet with some cells protected?
I have a spreadsheet which has four columns of formulas protected so people
can't change them!
However, i still want people to be able to filter the spreadsheet and this
isn't working, is there a way of locking those cells but not stopping people
If you are using Excel 2000 or earlier, then you do not have the
option to allow filtering when you protect a sheet. However, one way
around this is to copy/move your formulae to another sheet which you
can protect (and hide if you want to), and then have links in your
first sheet to the cells with the...OWA
I have had the same problems as the other people with NT4.0 SP6
and Exchange 5.5 SP4 because of that Outlook 2003 thing.
Anyway I installed the patch from MS the Service is running fine.
But I can't open the Password page on OWA anymore, I always got
the following error:
Serverobject, ASP 0196 (0x80040154)
You should only use InProc-Servercomponents. If you want to use
Local-Servercomponents, you need to change the "AspAllowOutOfProcComponents"
in the metabasis.
/iisadmpwd/aexp2b.htr, line 61
Maybe someone got the same too.
...Can password be provided to a partcular folder under Inbox.?
I am using Microsoft Outlook 2000 (188.8.131.5211).Can anybody
guide me how to provide passwords to a particular folder
under inbox in Microsoft Outlook.I have configured my
inbox so that the mails get downloaded in to my hard drive
from server i.e. a .pst file is being created in my
drive.On right clicking -->properties-->Administration--
>There is an option,This folder is avalaible to:
but that remains disabled even after i have tried
different options from the Initial view on the folder:
Anybody who can throw light on this,i will be very
greatful...print 1 paper from 2 sheets
How can i print the range a1:m10 from sheet 1 AND a11:r10 from sheet 2 on
ONE piece of paper ? Anybody knows a solution ?
Mijn Postvak In wordt beschermd door SPAMfighter
203 spam-mails zijn er tot op heden geblokkeerd.
Download de gratis www.SPAMfighter.com vandaag nog!
Create a new sheet.
Copy A1:M10 of Sheet1 to that new sheet
Copy A11:R10 of sheet 2 to that new sheet
Print from there.
If you have to do this lots of times, you can
to the new sheet
shift-edit|paste picture link
And the same with A11:R10.
By using paste ...4 postcards on 1 sheet
publisher 2007 If I go to print and click multiple copies it will print 4 on
a page but then I have to print one page at a time. I tried the page set up/
postcard/ us letter and couldn't get that to work. publisher 2003 was alot
Use the Avery US Letter postcard setup. 3263 works every time.
Mary Sauer MSFT MVP
"linda" <firstname.lastname@example.org> wrote in message
> publisher 2007 If I go to print an...Hyperlink to specific excel sheet from powerpoint or Word
Can we create a hyperlink to a particular sheet (or a defined range) in
a excel document from powerpoint / word??
Yes. Insert > Hyperlink and type something like this
Everything after the # is called the subaddress and determines where in the
sheet the link goes.
Daily Dose of Excel
> Can we create a hyperlink to a particular sheet (or a defined range)
> in a excel document from powerpoint / word??
...Formatting In Unprotected Section of Template
In Office 2003 you were able to add bullets in an unprotected section of a
template - now, with 2007, this option is no longer available. Any other
suggestions? - I have used the Insert Symbol and Alt 0149 but is there
In an unprotected section of a protected document, you can press
Ctrl+Shift+L to quickly apply the List Bullet style to the selected
So-called quick styles can be applied via the Styles box on the Home tab.
Also note that you can apply any style via the Style box which you can add
to the Quick Acc...populating sheet with data from other sheets
TOTALS: 38 Sets in Progress 16,764 7,908 8,856 47.2%
Priority Year Set Info Set Total Have Need % Complete Updated
LOW 1952 TOPPS 407 0 407 0.0%
LOW 1953 TOPPS 274 0 274 0.0%
LOW 1954 TOPPS 250 0 250 0.0%
LOW 1955 TOPPS 206 0 206 0.0%
LOW 1956 TOPPS 340 0 340 0.0%
LOW 1957 TOPPS 407 1 406 0.2%
LOW 1958 TOPPS 494 2 492 0.4%
LOW 1959 TOPPS 572 33 539 5.8%
LOW 1960 TOPPS 572 10 562 1.7% SCROLL DOWN!
LOW 1961 TOPPS 587 3 584 0.5%
LOW 1962 TOPPS 598 0 598 0.0%
LOW 1...Watermark Image on Sheet
Is it possible to place a 'Watermark' image on a worksheet i.e. Company logo
as you can do in Word?
In order to print a watermark.
Watermark, printing of, Robert Rosenberg. Also Ron de Bruin has a zip file.
David McRitchie, Microsoft MVP - Excel [site changed Nov. 2001]
My Excel Pages: http://www.mvps.org/dmcritchie/excel/excel.htm
Search Page: http://www.mvps.org/dmcritchie/excel/search.htm
Hi all Gurus, is it possible for a user to be able to add comments to a
worksheet without unprotecting the sheet in Excel.
yes is posible. you have to pick 'edit objects' on sheet protction dialog
"Neil Holden" <NeilHolden@discussions.microsoft.com> wrote in message
| Hi all Gurus, is it possible for a user to be able to add comments to a
| worksheet without unprotecting the sheet in Excel.
...form validation determines which sheet to add data
Let's say I'm creating a form that a non tech savvy used car dealer uses to
enter his newly acquired vehicles to the excel workbook. Each sheet of the
workbook is a unique model year of the car. (That would allow him to quickly
refer to all vehicles of a given year.) On the input form, I would like
validation such that if he selected "2006" from the drop down list of vehicle
years, the data from the form would be AUTOMATICALLY be added to sheet
"2006", regardless of which sheet is currently showing at the time. What
would the code look like? I su...Avg. All #'s on sheet
Hi there...Anyone know how I could write a formula that will average al
#'s on my sheet...The range will have text in it that I want it t
Message posted from http://www.ExcelForum.com
nevermind....should have just tried it first. thank
Message posted from http://www.ExcelForum.com
...Pivot using three sheets
I use Pivot table (Excel 2000) regulary for summarising my
Now my data is spread over three sheets. How can I include
the data from all the three sheets in one pivot table.
Because as I understand, the Pivot table can include only
values only from one sheet. Please guide me.
On the very first step towards creating a pivot table, instead of just hitting next, take a look
at the multiple consolidation ranges option.
Ken....................... Microsoft MVP - Excel
Sys Spec - Win XP Pro / XL2K & XLXP
-----------------------------------...HELP: Sheet embedded comboboxes
I am assisting somebody with their excel project and they have a sheet with
comboboxes in it.
When a value is selected, it populates cells underneath, however when the
data is freshly loaded, the cell underneath is given the value but the
combobox does not update to this value.
I have tried to click on the box to edit it, however no matter how many
times i click i cannot seem to get it to recognise i've clicked. In other
words, the resizing box does not come up and i have no right-click menu.
All i can do is select from the drop down list without any editing of the
I want to increase font size of name 's sheet.
What should I do?, Can you help me?,,Pls
This post is a suggestion for Microsoft, and Microsoft responds to the
suggestions with the most votes. To vote for this suggestion, click the "I
Agree" button in the message pane. If you do not see the button, follow this
link to open the suggestion in the Microsoft Web-based Newsreader and then
click "I Agree" in the message pane.