When I noticed the clock on my pc was wrong, I changed
the time zone from Pacific to Eastern which is my correct
U.S. time zone. After doing this, all of the items
inserted as "all day" appointments in my monthly calendar
are displayed with an image of a clock on either side of
the appointment. The option to display clocks is turned
off in the settings. Why is this happening and how can I
prevent it from happening. Right now, I've had to put
back the Pacific time zone and adjust to the pc not
telling the right time. Is there any other solution?
No ...IIS, CEICW, Firewall failures after NIC change
I had to replace the Single Nic in my SBS 2003 box. No ISA is installed.
While I can run the Configure Email and Internet Connection Wizard, it
tosses an error on the firewall configuration.
Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7023
Time: 7:36:11 AM
The HTTP SSL service terminated with the following error:
The system cannot find the file specified.
For more information, see Help and Support Center at
Event...Send/Receive continues 1000s of times
When Outlook does its regular send/receive it ends up sending and receiving
thousands of times. The task pane shows an ever increasing number of tasks
that it says have been completed successfully. When all it actually is doing
is rechecking the mail accounts I have, over and over again. Literally
thousands of times. This interferes with anything that I want to do in
Outlook while this is going on.
It seems to have started after I downloaded either the latest version of
itunes or the latest version of Adobe (or some other application like that).
Help! And thanks.
Per Roady - MVP, th...One time code
In either an SDI or MDI application, if I want to include some functionality
( such as serial port configuration and control thread) that can only be run
once per application instance, where should that code go? I looked at the
App class but it doesn't handle user messages ( at least by default ).
Should the main code and worker thread go in the MainFrm class in the
www.Newsgroup-Binaries.com - *Completion*Retention*Speed*
Access your favorite newsgroups from home or on the road
If it has to do with the "wi...cpu time
Can you tell me about good tool for vs-6 that can tell me what functions in
my application take the most cpu time?
In article <u$YZa3o9EHA.2680@TK2MSFTNGP09.phx.gbl>, firstname.lastname@example.org
> Can you tell me about good tool for vs-6 that can tell me what functions in
> my application take the most cpu time?
VS 6 includes a perfectly good profiler, which does exactly this. If
you're working inside the environment, go to the link tab in the
project settings, and click the "enable profiling" check box, then do
a 'rebuild all' to gene...Time Out a MsgBox
I have a file that runs a macro when it is open. This file may be opened
manually or automatically by a macro from another file.
If the file is opened manually I would like a MsgBox to prompt the user to
end the macro before it gets into the body of the code.
If the file is opened automatically I would like the MsgBox to automatically
respond after a time delay to allow the macro to continue running the bulk of
Is there anyway to force a response to a MsgBox after a preset amount of
time with no response from the user?
How about this instead which closes...Cannot change state of a promoted emailmessage
When I promote an emailmessage to an activity, the default setting is
that the activity in completed. I cannot change that, but I want to,
anyone who knows how to do that?
...Changing a transaction to be in Foreign currency
I am having problems with my investment accounts. My base currency is
canadian. However when I do a transaction in a security that is based in the
US, MS Money assumes that the price entered is in C$. Hence the purchase/sale
price is not reconciling with my statements adn I show a lower/higher cost in
FYI The security is shown to be in US in the security details.
In microsoft.public.money, VUSA2006 wrote:
>I am having problems with my investment accounts. My base currency is
>canadian. However when I do a transaction in a security that is based in the
>US, M...Calculating time and pay in excel
Hi, i'm trying to make a spreadsheet that can calculate pay per minute
depending on an average length of time worked. Its driving me crazy and
any help would be greatly appreciated! Coloumn A is length of time, at
the bottom is a total time, next to that is an average length of time
worked and this is then multiplied by the amount appropriate for that
average. What would be the best way to work all of this out
Many thanks for any help you can give
wobbleman's Profile: http://www.e...run time error
When I attempt to import a text file (.txt) in to Access, an error occurs. Run-time error �3163�: The field is too small to accept the amount of data you attempted to add. Try inserting or pasting less data When I click the Debug button this pops up: .Fields("TranType").Value = rs("MoveType").Value A different error occurs when save it to my desktop, and this is what happens.Run-time error �2185�: You can�t reference a property or method for a control unless the control has the focus. When I click the Debug button this pops up: MsgBox "Import File Not Found:&quo...Start Time & End Time
I have a table of data for my Scheduled cutting list that is exported
from another program into an Excel Spreadsheet and from this table I
would like to be able to find the start and end time of the production
runs automatically in a separate table.
The table is set up like this
Planned order Time Product Description Volume
12345 08:00:00 Product 1
23435 11:32:00 Product 2 5680
14567 13:24:00 Product 3 10000
and so on.
I can find the start time by us...Am I behind the times?
I have just installed Exchange sp2 on my SBS 2008 boxes and all went well.
One weird thing at the end of one of the installs it said Web Apps (I think)
couldn't restore default configuration, but everything seems to be working
So then I went to look for updates and I see a few that I must have missed.
I use WSUS on the network. One is Exchange SP2 update rollup 3. Go for it or
no? Second, Windows Server 2008 SP2. Yikes, when did that come out for SBS?
I wonder why it never popped up before since it looks like it's been out for
quite some time. Nonetheless, s...Transferring freight more than one time on a sales order
We frequently have partial shipments of sales orders and we leave the sales
order open until everything has shipped instead of creating backorders. The
system will allow you to have several tracking numbers for each order but you
can only transfer the freight once. I would like to make the suggestion to
be able to transfer freight more than one time.
This post is a suggestion for Microsoft, and Microsoft responds to the
suggestions with the most votes. To vote for this suggestion, click the "I
Agree" button in the message pane. If you do not see the button, ...change cmdButton if IsNll
I have a form with job addresses and a command button that opens a second
form to add mailing addresses to the same record as the job addresses form.
It works fine. I want to have the command text red if a particular field is
empty in the second form. Here is the code I have tried.
If IsNull(Form!frmCustomerMailAddress.[mailAddress]) Then
Me.cmdMailAddress.ForeColor = vbRed
Me.cmdMailAddress.ForeColor = 16384
The vb code window opens and highlights this line in yellow when I move to
new record in the form with the command bu...Public Folders
This was a conversion from SBS2000 to Exchange 2003.
the email came across fine. thats not the problem.
There is a calendar kept in a public folder.
One person keeps it up - its the schedule for the building.
Any item on that calendar which existed pre-conversion can not
be modified, updated or deleted. Items which are placed into the
calendar post conversion are fine, we can change and delete at will.
we tried this as the system administrator
and have given ourselves all rights in exchange, with no difference.
Totally clueless why we can't operate on anything that was con...Incorrect Time Stamps
Exchange seems to be stamping the wrong time on emails and events
sporadically. All the times on servers are correct. Any thoughts?
Craig Tuttle - Level I Exchange Tech
The time stamp can also be handled by the client. Which exact time field is
being stamped wrong? Have you verified that the client has the correct time
(i.e. Daylight savings time set correctly)?
"Craig Tuttle" <CraigTuttle@discussions.microsoft.com> wrote in message
> Exchange seems to b...How chart time scale x-axis with another date serie
Hello all. I have this problem, I will need to create this chart that I don't
know how to.
Serie 1 is below which needs to be time scaled
Serie 2 - needs to plot the three dates in serie 1's time scaled X-Axis with
I will look something like you have a line of count on a time-scaled chart,
with 3 dates point in the x-axis. Please ...How to change the style of fullname
I would like to change the style of "fullname", Such as "Lastname+firstname"
withouth ",". Anyway, in the system settings, there are no such style of
How to change that?
...Activity default due time
I need to stop the default coming up as 12:00am and set it to something like
9am so people get reminders at reasonable times.
How can this be done?
If you don't mind writing a few lines of code, look at "Setting a default
Michael H�hne, Microsoft Dynamics CRM MVP
Custom Lookup Dialog: http://www.stunnware.com/crm2/?area=customLookup
The ...use workflow when a field Changes
How can I send a mail message to the Owner when a date field changes , by the
use of the workflows.
Workflow will not fire on typical "update" events. You can use a callout to
do this though.
MVP - Microsoft CRM
"Irshard" <Irshard@discussions.microsoft.com> wrote in message
How can I send a mail message to the Owner when a date field changes , by
use of the workflows.
How can I use callout, please explain little more.
"Matt Parks" wrote:
> Workflow wi...Template format changes
How do I change the default formatting for "$", "%" and"," when I open a NEW
file? When I enter a large number and select comma formatting, it gives me
two decimals, and I want none. I would like one decimal with percent format.
Older versions of Excel allowed you to save a normal.xlt file with changes.
When I add a personal template, Excel won't load it without me selecting it
Excel never had a Normal.xlt, it had a BOOK.XLT
Open a new workbook. Customize as you wish.
File>Save As Type: scroll down to Excel Template(*.XLT) and s...Time / Negative Time
If, for instance, in Excel you write 17:00 - 16:30, it will produc
0:30. However, 16:30 - 17:00 will produce #####, understandibly
because you cannot have - ? o'clock. By formatting this to a number
can produce -0.5.
What if I still want to represent the decimal, but out of 60, so that
can still get -0.30. I have tried messing about with fractions and
still can't get it. Any ideas?
Message posted from http://www.ExcelForum.com
On Thu, 13 May 2004 17:33:58 -0500, Kiaat
>If, for insta...How Can I Know last time was activity on a database
I'm doing a process that uses databases from sys.databases.
I would like to know when is the last time happened some activity there.
I've tryed to look at sys.tables but only shows me last structural change on
it. Not last time data has changed.
How this can be done?
SQL Server doesn't store this information (imagine the overhead for all
those who doesn't need it). You can for instance use a trigger to keep track
of that information.
Tibor Karaszi, SQL Server MVP
http://sq...How to Calulculate Hrs and Mins between time frames
This is a multi-part message in MIME format.
If i have 2 cells with time values say: A1=3D7:30AM and B1=3D3:30PM.
7:30AM - 3:30PM set to NORMAL Hours
3:30PM - 6:30PM set to TIME & HALF Hours
Any time after 6:30PM - 7:29AM to be DOUBLE TIME hours
Then if i set 4 other cells for data input:
A2=3D( DATE 1) 29/5/2009 Start date. B2=3D(Date 2) 29/5/2006 =
A3=3D(Time) 7:30AM Start Time. B2=3D (Time) 7:00PM =...calculate time and date
I want to find out how many houer iy is between one date/time and
another date/time. date and time one cell A1= 04.03.2005 08:30
date/time two cell A2= 05.03.2005 23:59
custom format [hh:mm] or for Norway [tt:mm]
"make" <email@example.com> wrote in message
> I want to find out how many houer iy is between one date/time and
> another date/time. date and time one cell A1= 04.03.2005 08:30
> date/time two cell A2= 05.03.2005 23...