Pivot Chart problems
This is a multi-part message in MIME format.
I have two issues with pivot charts.
1) I create a pivot table and chart with VB. I want thick lines on the =
chart, so I do as follows:
For i =3D 1 To .SeriesCollection.Count
.Weight =3D xlThick
This works great. However, upon selecting a Page Field value from the =...Problem with the reconnection of a mailbox to a different user
I have a problem with the reconnection of a mailbox, when I try to
reconnect it to a different user. This is the scenario:
1) User A has a mailbox, I disconnect it.
2) Creation of User B
3) Reconnection of mailbox of user A to user B (I have tried not only
with recovery center, but also directly through mailbox list section)
No errors appears during theese steps, but when I try to create a new
profile in outlook (I have created it only in the server, this is a
test server), I see that the mailbox of user B (or the user B?) has
not found! If I try to use Outlook Web Access, ...Help needed to run macro
I think I may have created a macro to resolve an earlier problem, but
when I try to run it I get...
'Macros in this workbook are disabled because the security level is
high, and the macros have not been digitally signed or verified. To run
the macros, you can either have them signed or change your security
How can I get my macros to run on my machine, where they are created,
without compromising security?
I've found and run selfcert.exe but it hasn't made any difference.
Do I need to do anything else to make this effective?
I'm a novice at this so step ...Problem sending e-mails with Outlook & SBC Yahoo DSL
I have been unable to fix a problem and am looking for
help. I have Outlook 2000. I also have SBC Yahoo DSL. I
have spent hours on the phone trying to fix this problem,
reloaded my software, etc. I can recieve e-mail from the
SBC Yahoo DSL server with my Outlook, but cannot send e-
mails. The error message I get is 0x800ccc0f. I know this
means the outgoing mail server does not recognize and log
me in, but does anyone know a way to change this? SBC made
sure my settings were correct, but the problem persists.
They claim it is an Outlook problem, but it never happened
with other ISP...2005 Update Retirement Account Problem
I am having the same problem as discussed in a post on 10/5. Has anyone else
seen this or know of a solution? And btw, I am not running XP SP2, just a
fully updated SP1 system.
I tried everything I could find in the KB to no avail as well.
I am getting really frustrated with how many bugs there are in 2005. I have
used MS Money for years and have never had as many problems as I have with
2005. I can't believe that this product made it out to the public with as
many problems as there are.
Any comments would be appreciated.
...Problem sending emails from Outlook Express Ver6 NEVER MIND!
I am trying to use Outlook Express Ver6 instead of Eudora. I can't
seem to send e-mails from it. When I send a test to myself I get the
The message could not be sent because the server rejected the sender's
e-mail address. The sender's e-mail address was (MY ADDRESS)
.. Subject 'TEST', Account: 'incoming.verizon.net', Server:
'outgoing.verizon.net', Protocol: SMTP, Server Response: '550 5.7.1
Authentication Required', Port: 25, Secure(SSL): No, Server Error:
550, Error Number: 0x800CCC78
Can anyone suggest what is wrong? Must be something...Problems importing pst file...
One of the users in our office tried to open Outlook & recieved an error
message that indicated that the pst was gone or corrupt. After running
the Inbox repair tool to no avail, as well as picking up a copy of their
pst from yesterday's backup, I'm still unable to do anything with it!
When trying to import it, I get the message "Properties for this
information service must be defined prior to use" & after hitting ok, I
get a message that the file isn't a personal folders file! I have read
several long-winded posts in other forums, which basically have given me
no...Problem of space between items in SMALLICON mode
I have problem with spacing between items in LVS_SMALLICON list mode.
Some that have long text hide the others. Not when i'm changing mode,
just when I change data in my list.
I use SetWindowLong to change list mode, and tried list.Arrange,
list.redraw and list.update functions with no success. Actually, list
doesn't change space between items when I change data in my list.
I browsed the group, and found some unanswered subject about the same
problem, so if someone could help me it would be cool.
Have you tried the CListCtrl::SetIconSpacing before CListCtrl::Arrange?
Vict...Outlook / Exchange 2003 user connection problem
Ok, we are doing our Outlook configuration in a two step process first
we add the Computer to the domain ( not the user ). Then we configure
Outlook with the exchange server and user information. All of our
users are created and have a default password.
Problem is that when we go to setup Outlook we are only able to setup
2 - 5 computers a day.
After we get 2 - 5 setup, when we try to install/configue another
Outlook client we receive a message that say Cannot connect to
Exchange server or Exchange server does not exist.
But if we wait a day and go back to setting up Outlook again we are
ab...Problem with a MIN function
Please can someone explain to me why this doesn't work:
I've got dates in both ranges - and both ranges also contain blanks. I don't
understand why this formula does not return what I want!! I'm trying to get
the earliest date in A46:A52 where there is a blank in the corresponding
cell in B46:B52.
I've checked the formula (including the F9 option in the formula bar to view
each part) and it's got me beat!
try the arraz formula
>---...Outlook2007 automation problem with ".Display"
I am using automation in a VB5 program to send Emails using Outlook2007. If
I use the ".Send" mailitem the email is sent out Immediately.
If I use the ".Display" mailitem in my program, after I look over the Email
and then click the "Send" button on the Outlook display screen, the email is
placed in my outbox but does not get sent out. I have to exit my program and
then click "Outlook". When Outlook displays, I can see the Email in the
Outbox which will then automatically go out (without me having to click send
I want th...XLS2000 IE6 No Data Sort
I've got users with IE6 and Office 2000 who are opening
XLS sheets from the web. From the IE browser the Data menu
appears but is not functional.
I attemped to unlock the toolbar and move it so that none
of the menus were covered up thinking this might help.
Office XP (2002) with IE 6 works just fine, problem is I
have 1500+ users on Office 2000.
Can anyone offer any suggestions? I've check permissions
on file, users rights on PC and Office/OS updates.
...Calender Problem after Exchange Migration
I've got a bit of a Exch Calendar problem. We recently migrated from
Exch2000 Srv to Exch2003 Srv. We also changed domain names (AD and company)
Due to time constraints and other issues I won't go into, things were a
little rushed and the way we did the migration was probably not by the MS
rules. Basically we restored a backup of the mailboxes from the old Exch2000
server to the new Exch2003 server. This was done via Qinetix MB idata agent.
We thought this would be quicker than exporting the mailbox's out as PST
files and then importing them. This part app...Autonumber problem
I have a problem with autonumber field in my project: when I deleted some
last records, it seems MS Access saved the last number of the autonumber. So
when I added a new record, the number would be skipped from the previous
I'd like the next record will be in order from the previous record in my
outonumber field. Is anybody can tell me how to solve this problem?. Thanks...
Message posted via AccessMonster.com
If the value of the autonumber actually matters then you shouldn't be
using atuonu...Mac problems opening excel files when connected to two windows shares
Operating System: Mac OS X 10.5 (Leopard)
I'm noticing a strange problem when I try to open excel files when I connect to a second windows server share. I'm getting a cannot open excel file error. Not sitting at my work mac computer at the moment so not quite sure that was the exact error. <br><br>This error is occuring on both leopard and snow leopard with Office 2008 for mac. <br><br>The two windows servers are being connected to by smb://server1/common and smb://server2/common. <br><br>If i connect to each one i...Sort Start -> Programs from command line
I've done numerous web and usenet searches over the past few days and
come up short, and am hoping now to get somebody's input...
I am not a C programmer, but am looking for a registry or command line
technique, or a small 3rd party command line tool that performs the
right-click -> Sort By Name feature on the Windows XP Programs menu.
(Or similarly, the "Taskbar and Start Menu Properties" Control Panel's
Sort button.) It would obviously be helpful if it worked for newer
OS's, too. From what I can tell, there is no built-in way to do this,
I want to sort from cell a1 to a10 in a column. However, I can only able to
sort from cell a2-a10 eventhough I selected cell a1-a10 and clicked sort.
What is going on?
After clicking on SORT to open the sort window, make sure the button at the
bottom for "No Header Row" is selected.
> I want to sort from cell a1 to a10 in a column. However, I can only able to
> sort from cell a2-a10 eventhough I selected cell a1-a10 and clicked sort.
> What is going on?
...Sorting 2 lists
I'm sure there's a name for what I'm trying to do, but I don't know it so I
can't search previous questions for answers. Please help!
I have 2 lists:
List 1, column A - Customer names
List 1, column B - annual sales 2003
List 2, column C - Customer names (some of which are also on List 1)
List 2, column D - annual sales 2004
I want to match up customers that exist in both lists and be able to compare
2003 sales in a column right next to 2004 sales. The customers that don't
match up can be listed below.
Am I correct that the two lists are on the same sheet...Void Deferral Transactions Problem
I am having a problem voiding some deferred transactions. I entered the
transactions through Receivables Management. I can see these transactions
under the customers in the Deferral Inquiry window. However, they do not
show up in the Void Deferral Transactions window for me to void. Some other
transactions entered the same way in the same batch as these but under
different customers do show up. Cannot figure out why that would be. I have
tried check links and deferral check links to no avail. Any suggestions?
...Problem: creating memory CDC for drawing and saving into BMP object in different color mode
Definition of problem:
1. I have some function Draw(CDC* dc) for drawing smth on CDC object. The
body of function is "black box", I won't change it.
2. I need draw it into memory CDC object. Well, following code will do it
mydc.CreateCompatibleDC(pDC); // pDC is some display DC
m_bitmap.CreateCompatibleBitmap(mydc, width, height); // <- creating an
CBitmap* m_pOldBitmap = dc.SelectObject(&m_bitmap);
Draw(&mydc); // draw scene
........ do smth with mydc ......
if (m_pOldBitmap) mydc.SelectObject(m_pOldBitmap);
The...some problems with OL 2007
I have used OL XP (2002) for years and I was very happy. But some friends
convince me I should be more "modern" so I installed Office 2007, with Win XP
It seems very complicated to me, but I have problems with Outlook. My emails
don't download "normally", I have to close OL and reopen it (of course
before, I did a send/receive and there was no email), not always though,
sometimes they download. To prevent your next question, they are mail that
should have been in my inbox for some time (a few hours).
Also I don't get an alert. "Before" I ...ascending sort definition [sorting alphabetically]
Does ascending sort mean A-Z?
Microsoft MVP 1998 - 2010
Pearson Software Consulting, LLC
[email on web site]
On Tue, 5 Jan 2010 17:44:02 -0800, GaryBlade
>Does ascending sort mean A-Z?
See http://www.exceltip.com/st/How_Excel_Sorts_Lists/246.html for more
> Does ascending sort mean A-Z?
...Sending mail problem
when i try to send a mail from CRM gives me an error "Unspecified error"
i installed Exchange server on the same machine and it's working
...problem with pointer to window
There is a dialog which comes up with different controls or text depdening
to received aregument from a caller (after modifying its construcutor). The
problem which I'm faced now is that it loses its handle to the Wnd so an
assertion message is displayed!
The problem causes in lines where I have used :
My concern is to have one dialog for three different operatoin.
in header file :
I changed the Constructor From => CTes...MSDART.DLL Problem
Since upgrading from XP Home to XP Professional I get the
following error message.
CiceroUIWndFrame: Outlook.EXE - Entry Point Not Found
The procedure entry point GetIUMS could not be located in
the dynamic link library MSDART.DLL
Any suggestions please?
Download and install the latest version of MDAC available from the download
site from Microsoft.
Robert Sparnaaij [MVP-Outlook]
Tips of the month:
-Backup and Restore
-Create an Office XP CD slipstreamed with Service Pack 3
"Bernard" <email@example.com> wrote in message