Pivot Table Counting
I am having trouble trying to calculate fields through a pivot table.
Basically, I have a data set that looks like this:
Record Number State Value
1 CA 0
2 CA 12
3 CA 15
4 NJ 0
5 NJ 10
I want to set up a pivot table that will show 2 columns, one with th
total number of records and one with the total number of records wit
non-zero values. Both of the...Pivot Tables #4
Hello you experts out there.
I nned some Pivot table advice ( a website address for
basics would be great), for instance how to excplain
pivots and how to create them.
I use lots of products with lots of sizes from various
suppliers to name but a few columns. Is there a limit as
to the amount of columns of data?
Thank you very much.
check out Debra Dalgleish's site - http://www.contextures.com/tiptech.html -
she has a link to Jon Peltier's site which explains PT basics and then lots
more interesting info on them.
check out www.hcts.net.au/tipsandtric...Pivot Tables
I was windering if some one could provide me with a link to a tutorial for
what I am trying to do.
I have an aggregate table. This table has several groups and several
columns. The intersection of a group and column is an aggreate value such as
Sum function of a column value in that group.
Normally a Pivot table shows 1 aggregate value at the intersection of a
group and a column. What I want is:
To show more than one value at the intersection besides the aggregate value.
In other words, if a simple pivot table cell is:
Aggr(x,y) where aggr is an aggregate function such a...Pivot Chart Formatting #5
How can I format a Pivot Chart and keep the customized format when refreshed?
This is a known issue by Microsoft.
Short answer, you can't do it. =(
One possible work around is to record a macro of you setting the formatting
of the chart, and then set it up so that the macro runs whenever the chart
*Remember to click "yes" if this post helped you!*
"Germeny Santos" wrote:
> How can I format a Pivot Chart and keep the customized format when refreshed?
This is dependent on what custom formatting you are refering to. T...How do I calculate the Root Mean Square (RMS)
array entered (ctrl+shift+enter)
where A1:a5 is the range where the number range exists
in message news:4AECE52A-2666-43FB-9717-3D98B2747894@microsoft.com...
You need to know the values you're wanting the RMS of. If this is
electronics, where RMS is virtually completely misunderstood, you need to
say what the waveform is (sine, square, program material, or what), and what
you know about...Pivot table question: Sorting the subgroup in a pivot table (when using the top 10 option for the subgroup)
I have created a pivot table which has a one subgroup in the second
column from the left. It uses the Top 10 option, so there are 10
So my data looks something like this:
Group 1 50
Subgroup 1a 10
Subgroup 1b 40
Eight more subgroups
Group 2 30
Subgroup 2a 20
Subgroup 2b 10
Eight more subgroups
What I would like to do is sort by THe totals for Group 1, but then
also sort by the subgroups, based on the values for each subgroup
(similar to the "Sort by, ...join multiple pivot tables?
How can I link up multiple pivottables all based on the same data where all i
would have to do is change the page option (drop down menu) from the first
pivot and the rest of the pivots would automatically adjust to match those?
There's a sample file here in which you can change the page field in one
pivot table, and all the related pivot tables change:
Under Pivot Tables, look for 'PT0021 - Change All Page Fields' or
'PT0008 - Change Multiple Page Fields'
> How can I link up mu...Changing the calculation order
Can the order that Excel recalculates be changed to start fro the lower right?
Excel automatically adjusts its final calculation order depending on the
dependency chain in such a way as to get the correct result regardless of
Why would you want to change this?
FastExcel 2.1 now available
"A Process Modeler" <A Process Modeler@discussions.microsoft.com> wrote in
> Can the order that Excel recalculates be changed to ...Help with pivot table
I'm after some help with a pivot table
I have created a work book to log certain defects, and would like to use a
pivot table to show defects per unit on an improvement tracker, is it
possible to have the pivot table to shift cells to the right when it is
updated and required more columns so it doesn't overwrite data on the sheet
it would be like this
the componet fault unit numbers & Total defects are the pivot table & the
action would be the start of the manual data
Compontent Fault Unit Numbers Total Defects Action
1 2 3 4 5
Light Inop 1 1 ...Custom Calculation Problem
I have a 4 column table (Column A,B,C and D)as my source data. D contains
numbers. I do a pivot table report. I layout A,B and C (in this order with
subtotals off) as row fields and D as datafield as sum. I reenter D into the
data area and do a custom calculation by specifying Show data as:
"Difference From", with Base field = B and Base item = (previous).
The result i wanted would have a sum of all B items with common A's as well
as the difference between consecutive items.
The custom calculation behaves inconsistently: for some items, it shows the
difference for some it doesn...Can I permanently delete/hide data within Pivot Tables?
Microsoft Excel 2002
I have 155 clients which I need to run Pivot Tables for! All with the same
pivot table layout.
Is it possible to run the Pivot table with the 155 clients as a Template
basically, then somehow delete or permanently hide the data leaving only one
client, so that I can save multiple copies for each of the individual clients?
Or can I set up a pivot table where I can automatically feed in parameters?
Client details are stored on an Oracle database!
Right-click on a Page Field and select Field Settings from the context menu,
then click the Advanced button. Yo...Using formulas for pivot table
I know you have the count field but is there away to input a formula?
For example customer ordered 25 cases and each case weighs 4 lbs and
the end result would need to be total pounds ordered.
If you do the calculation in the pivot table you may not get the result
that you expect. If possible, add a field to the source data, and
calculate the order total there.
Then, add the OrderTotal field to the pivot table's data area.
> I know you have the count field but is there away to input a formula?
> For example customer ordered 25 cases and each case weighs 4 lbs...Hyperlink in Pivot Table
Is it possible to put hyperlinks into a pivot table to go to the detail in
other worksheets? I have a top 10 list of components with issues and would
like the user to be able to click on the component to go to the list of
issues. I thought if I put the hyperlink in the cell where the pivot table
is getting it's info, it would come through, but that didn't work. Any
Just double clicking on the cell with the data of interest, will open
another sheet showing all of the entries making up that value.
Delete the newly created sheet after you have finished w...calculated fields on form and workflow
We've got the following problem. We use js to calculate fields on the
(just summate some numbers)
Now, we want to adjust the probability due to the state of the tasks you
have to complete within a opportunity with the help of a workflow.
The problem now is, that the calculated fields are not want to update with
form or change field)
What would be the best practise to realise something like that?
Or is it simple possible to run js within a workflow to re-calculate it with
the new pr...Flowcharting Table relations
Hey guys and girls. New one for you. I am doing an IT audit of Great Plains
and need to flowchart how the data files are related to each other.
In other words, how does one file feed into another file, and what field or
fields in a particular table is used to relate/link to another table.
Does anyone where I can find such information?
Check out the Great Plains SDK available on the installation CDs. There
are several diagrams that describe table relationships. Also, there are
module documents that contain posting flowcharts.
Corporate Software Consultants...chart options show data table
Currently using 2 workbooks to produce 1 chart - the source data in workbook
1 and the chart in workbook 2. We also are using the "show data table" option
to most easily view all values in the chart. We would like this data to keep
it's currency format to best reflect the values in the chart; however, the
data table loses this formatting when we close workbook 1. Is there any way
to hang onto this formatting after the workbook is closed?
Data tables in charts are not particularly flexible or capable.
You combine the workbooks. Alternatively, put a table in the chart's...Pivot Tables #40
Does anyone know if there is a way to quickly clear a field list? I can't
find a keyboard shortcut or anything else in any of the help/support avenues
Thanks in advance for the help.
Are you trying to clear all the check boxes in the field's dropdown
list? In Excel 2002 and later versions, there's a Show All checkbox. In
Excel 2000, and earlier versions, you can use programming to hide or
show the items -- there's sample code here:
> Does anyone know if there is a way to quickl...line column Pivot Charts
Access 2003 does not support combined Line/Column Charts, but Excel does. Has
the capability been added to Access 2007?
Access does support a series displayed as a bars and another series as line.
MS Access MVP
Help me support UCP http://www.access.hookom.net/UCP/Default.htm
"John" <John@discussions.microsoft.com> wrote in message
> Access 2003 does not support combined Line/Column Charts, but Excel does.
> the capability been added to Access 2007?
...I need to convert a word table to excel
When I try doing this by copying the table it appears in excelwith one or two
empty lines in between each of my lines that I needed converting. Why is
usually means there are superfluous paragraph marks in the Word table.
"Aaron" <Aaron@discussions.microsoft.com> wrote in message
> When I try doing this by copying the table it appears in excelwith one or
> empty lines in between each of my lines that I needed converting. Why is
...deactivate the get pivot formula when I link a cell to a pivot
Currently I using excel 2003, but every time when I link the cell to a pivot
table it will convert to a "Get pivot" formula. Is there any way I could
See Debra Dalgleish's website for instructions:
Does that help?
> Currently I using excel 2003, but every time when I link the cell to a pivot
> table it will convert to a "Get pivot" formula. Is there any way I could
> deactivate it?
...pivot table error (25000 rows!!)
I am trying to run a pivot table on a file containing 25000 rows. I have
5 duplicate (identical structure) files. The pivot works on each but
one. On this file I get an error saying it has too many columns or rows
in the pivot table. Drag at least one column or row off the table...
Does anybody know what the reason for this message is, are their limits
to rows or columns? The identical table works on the other files,
therefore this message is so strange.
Who has an idea?
Craig_Richards's Profil...Pivot table move up command
Operating System: Mac OS X 10.6 (Snow Leopard)
I need to move up values in a pivot table to custom order them. When I right-click I see the "Move" menu, but the options to move up, move down, move to beginning and move to end are greyed out.
Did you find an answer?
Pivot table move up command
Operating System: Mac OS X 10.6 (Snow Leopard)
I need to move up values in a pivot table to custom order them. When I right-click I see the "Move" menu, but the options to move up, move d...About Calculation of Excel
Actually I found this problem recently and don't know why this could happen.
I did simple minus calculation of these two values: (-0.365)-(-0.3575)
and excel shows -0.0075000000000000100000000.
It is not exactly -0.0075.
Do I need to change some settings or ....?
> Actually I found this problem recently and don't know why this could
> happen. I did simple minus calculation of these two values:
> and excel shows -0.0075000000000000100000000.
> It is not exactly -0.0075.
> Do I need to change some settings or ....?
>...enterprise resources in which table of which database
when i add resource from active directory to resource center .and i want to
know in which database and in which table it will saved first.
It should be in the Published and the Reporting database. In the tables
"Basim" <Basim@discussions.microsoft.com> wrote in message
> when i add resource from active directory to resource center .and i want
> know in which database and in which table it will saved first.
...Opening a window(form) with VBA / storing data in a separate table
I have a third party application (Additional Inventory Fields in the
ActNow series from Hawk Mountain) that currently is accessed from the
Extra menu while in item maintenance. I have added a button to the
item maintenance form and I am trying to figure our what VBA code I
need to put in so that when the user clicks on the button that it
launches the form that is currently accessed via the menu. This is not
currently a VBA form but the window that comes with the application. I
have tried to put an "OnUserChanged" event on the button with a