I am working on a formula and am stuck. I have a goal date that I want to have a certain percentage of customers migrated (90%). There are many weeks leading up to the goal date. I have the following criteria setup: Prior to Week-4 2% of base migrate Week-4 20% migrate Week-3 20% migrate Week-2 20% migrate Week-1 20% migrate Week-0 balance migrate How can I set up a formula on a declining base to reach my goal of 90%?

0 |

11/17/2009 2:25:01 PM

Can anyone please help with this formula. If Sheet1 Column A = nothing(blank) And Column B = \\\\\\CC\\\\\\ Then Sheet 2 B7 = SumTotal. As a regular formula would be nice or VB code Hi Richard you want nothing at all in the whole of column A in sheet 1? do you want every cell in column B of sheet 1 to have \\\\\\CC\\\\\\ or should this (can this) only appear in one cell? and what range are you summing on sheet 2 in cell B7? Cheers JulieD "Richard" <anonymous@discussions.microsoft.com> wrote in message news:82ce01c477e1$77f0e740$a301280a@phx.gbl... > Can anyone please ...

I am using an =Ave function in a formula to average quite a few cell values together. I add new information all the time; sometimes 5 or 6 new cells at a time. How can I append or up-date my formula to include these new cells with out have to type the new cells into the formula? When I make the cell that has the formula in it active/edit, all of the cells that are referenced in the formula have a highlight around them. Is there a key or key combination I can press while clicking on the cells I want to add to the formula? Thanks, john Hi see your post in Excel.misc -- Regards Frank ...

I have a working SUMPRODUCT formula {=SUMPRODUCT(($C$4:$C$4341=z8)*(audittypefm1="Standard"))} that I need to change the 1st array to C5623. When I do I get a #N/A error. I've tried giving the range a name (empnofm2), and I've verified all the data in the C4:C5623 range is formated the same (general, it is all employee numbers from 2 to 5 digits long. I'm using a "trim all" macro which is working great. I am unable to determine what is causing the #N/A and how to fix it. Basically I copied an entire worksheet within the same workbook and changed the name, wh...

Hello, i had just read the data migration frameworkguide, and i'm trying to migrate data into the crm database. But i have not the same entries in my cdf_Account_info table, but data is in cdf_Account table present. What is working wrong?? log files are correct. I hope someone can help me! ali Hi Ali, This sometimes happens if the triggers on the cdf_Account table don't fire. I'm not sure as to the reason behind this but you can manually update the cdf_Account_info and cdf_Account_ext files with the AccountId from cdf_Account. Try use the following SQL: Insert Into cdf_A...

I have 98 sets of magazines each set has 12 in the set what formula can I use to get a total of issues in all sets have you tried 98*12 -- Don Guillett SalesAid Software dguillett1@austin.rr.com "Just Me" <no@isp.com> wrote in message news:eZ66ZEGHGHA.1192@TK2MSFTNGP11.phx.gbl... >I have 98 sets of magazines each set has 12 in the set > > what formula can I use to get a total of issues in all sets > =98*12 or =A1*A2 if the numbers are in A1 and A2 -- HTH Bob Phillips (remove nothere from email address if mailing direct) "Just Me" <n...

When invoice customers on account a "Sales Receipt" is generated and sent to my epson receipt printer, however most of my corporate clients "account departments" do not accept a "Sales Receipt". My question is: 1) How do I printer a receipt to say "Invoice" not "Sales Receipt"? 2) How do I send this "Invoice" to my laser printer and not my Epson Receipt Printer? ~Johnny @ Mr. Inkjet Inc. You can download 'Invoice' receipt files here https://mbs.microsoft.com/customersource/support/downloads/reportslibrary/rms/ModifiedRe...

Hi, What formula should I use if I want it to look at a specific cell and then work out the total number between two numbers. e.g. if cell H6 had 7-4 entered the number 9 would be returned. Thanks in advance I'm not sure how you got 9, but your life would be much easier if you used two separate cells and then subtracted the smaller from the larger (and then added one???). Boenerge wrote: > > Hi, > What formula should I use if I want it to look at a specific cell and then > work out the total number between two numbers. > e.g. if cell H6 had 7-4 entered the number 9 woul...

Can the offset be used in the below formula for the information in column "K"? In column L have the the following formula's L46 =MAX($I46*1000-$K$46*$J46,0) L47 =MAX($I47*1000-$K$46*$J47,0) .... L99 =MAX($I99*1000-$K$46*$J99,0) What I'd like to do is to copy the fomula into columns M, N, O, ... M47 =MAX($I47*1000-$K$47*$J47,0) M48 =MAX($I48*1000-$K$47*$J48,0) M49 =MAX($I49*1000-$K$47*$J49,0) .... N48 =MAX($I48*1000-$K$48*$J48,0) N49 =MAX($I49*1000-$K$48*$J49,0) .... O50 =MAX($I50*1000-$K$50*$J50,0) O51 =MAX($I51*1000-$K$50*$J51,0) .... How abou...

Can I customize my invoice design to show the business name in addition to the customer name in the address area on the invoices? This is not one of the check box options. (Why not?) Tazz3L wrote: > Can I customize my invoice design to show the business name in > addition to the customer name in the address area on the invoices? > This is not one of the check box options. (Why not?) Are you talking about an invoice created in Microsoft Money (what version and type?) or Microsoft Access the database problem? -- Joseph Meehan Dia duit Joseph Meehan wrote: > Tazz3L wr...

I have a report that must be turned in the night before for tomorrow's date. Is ithere a date formula that will return tomorrow's date to a cell in Excel? One way: =TODAY() + 1 In article <668782AC-774A-475F-9821-8A4C3B14A983@microsoft.com>, "Shadyhosta" <Shadyhosta@discussions.microsoft.com> wrote: > I have a report that must be turned in the night before for tomorrow's date. > Is ithere a date formula that will return tomorrow's date to a cell in Excel? I assume that you want the date to remain static after entry. Easiest way, use 2...

Can anyone help with the weekday formula. What I want to do is enter the date in say A1 11/20/2003 and have B return the answer of Thursday. Currently I use the weekday formula bu only returns the number of the day. Thanks in advance B ----------------------------------------------- ~~ Message posted from http://www.ExcelTip.com ~~View and post usenet messages directly from http://www.ExcelForum.com There are several ways to do this. One is to enter =A1 and format the cell with a custom number format of dddd. Another way is to use the function =TEXT(A1,"dddd"). -- Cordiall...

Hi, How do I change the following formula =SUMIF($F$39:$F$79,"PW Shopfitters",$D$39:$D$79)/COUNTIF($F$39:$F$79,"PW Shopfitters") to count within a named range (PW Shopfitters). Any help would be great. Cheers, Phil Hi A range name cannot have spaces, maybe that's your problem. Name your range PW_Shopfitters. Then replace your cell references with PW_Shopfitters, eg =Sumif(PW_Shopfitters,"PW Shopfitters",............ -- j.kasselman@atlantic.net.remove_2nd_at. Randburg, Gauteng, South Africa "PW11111" wrote: > > Hi, > &g...

I have just about completed the migration from Exchange 5.5 to 2003. We have moved all the mailboxes and changed the DNS entries to the new server IP. All mail is now being sent to the new server but if I stop the Exchange service on our 5.5 server no e-mail is being sent out. I figured this part out when I noticed the queue on the new server pointing to the old server with the protocol x400 had a lot of unsent messages. Obviously the mail is being routed from the new server thru the old server but I cannot figure out where to change this so it send from the new server. Any ideas? Hi Motley...

At least I think that's what I'm looking for. here's my situation: I've got a sheet where there is a variable (X) that changes depending on what row it is on. So I have a column (column c) that lists these variables (X is dependant on things from a different sheet). X is a muliplier that is utilized differently depending on the value of N. N is a Picklist selection and can change periodically. Or even be duplicated on more than one row. I have a vlookup that checks the value of N (column a) and needs to return a formula that has X applied if needed on the approp...

Hello. I have this formula loaded from a text field on a form: val([field10])+val([field20]) and I would like to use this as a code formula. I mean, if I use that in VBA code it works, but If I load from a text field it doesn't work. I need that my form use that formula stored in a text field to calculate values. Regards in advance, Marco responded to in another newsgroup. It's rarely necessary to post the same question to more than one group. If it is necessary, select all the relevant newsgroups in the "To:" or "Newsgroups:" field. That way, folks who...

Dear MS, How about a new function for this one. I'm sure MANY users have the same problem as me. The research below seems quite comprehensive and has effectively come up against a brick wall. Thanks Peter Harlan Grove posted this UDF: http://www.google.com/groups?selm=hkQVb.2432%24_4.259%40www.newsranger.com Peter wrote: > > Very Helpful Papou - thank you! > Do you know of an additional / alternative method where you achieve the same tihing but are not required to have all the relevant work sheets open? > Many thanks > Peter > > "papou" wrote: > ...

What formula in access can do =COUNTIF(CAF!D:D,A3) Basicly I have 2 tables I want the 2nd table to count how many times a number is listed in the 1st table. I am trying to do this with a query and the count expression but keep getting errors. Dont bother with this one guys just figured it out AMDGUY [MCP] wrote: > What formula in access can do > =COUNTIF(CAF!D:D,A3) > > Basicly I have 2 tables > > I want the 2nd table to count how many times a number is listed in the > 1st table. I am trying to do this with a query and the count expression > but keep getting e...

Is it possible to create a custom export in Entourage of a few select contacts (rather than the entire address book), which can then be exported to Excel? And how do we go about doing this? Thanks! On 6/1/05 1:16 PM, in article 1117656980.816906.160810@g43g2000cwa.googlegroups.com, "ashleymadigan@gmail.com" <ashleymadigan@gmail.com> wrote: > Is it possible to create a custom export in Entourage of a few select > contacts (rather than the entire address book), which can then be > exported to Excel? And how do we go about doing this? You can just drag them out to y...

What does the $ symbol mean in a formula? example: =G8*($A$14*2)*100 thanx The $ is used for absolut referencing. For e.g lets take your formula =G8*($A$14*2)*100 suppose you enter this formula in cell B2, now simply copy this formula one cell to the right (C2) by and one cell down (B3). C2: =H8*($A$14*2)*100 B3: =G9*($A$14*2)*100 So you see that The original G8 has changed, whereas $A$1 remains the same in both the new formulae because of the dollar signs. Mangesh "S" <S@discussions.microsoft.com> wrote in message news:D86597A4-C0A1-46AF-9DA6-FE06AB9C1FA0@mi...

Hi, I am creating a addin for outlook in C#. I collect some mails from inbox folder and store the details like Sendername, CC,BCC, receivedtime, subject, body, etc., into MS Access database. Also delete the mail from outlook. Is it possible to regenerate the mail in the inbox folder using the database details? In other words, how to add custom composed mailitem into Inbox folder ? I think, I can use the Send method of the Outlook object model or CDO or something to send a mail. But I assume, that mail will go the the CC and BCC persons also. Thanks in advance, regards, Kumar Outlook ...

i dont know if you can do this..... if(c5=10, take the cell 5 right 3 down to it, 0) if you can, i dont know how to write it in excel language thanks if anyone can hel -- cutsygur ----------------------------------------------------------------------- cutsygurl's Profile: http://www.excelforum.com/member.php?action=getinfo&userid=1504 View this thread: http://www.excelforum.com/showthread.php?threadid=27569 cutsygurl Wrote: > i dont know if you can do this..... > if(c5=10, take the cell 5 right 3 down to it, 0) > if you can, i dont know how to write it in excel language &...

I have $700,000 to spend on advertising for three different products. My market share for the three products is 51.96%, 36.07% and 41.25%. I want to apportion my 700K between the three products so that the product with the lowest market share gets the most advertising dollars, etc. Using my data, I've been trying to devise a formula all night that would do this, but I'm stumped. I could use a hint... Here's one way of doing it - put 700,000 in A1 and put your 2 percentage shares in B1:B3 and then put this formula in C1: =3DA$1*(1-B1/SUM(B$1:B$3))/2 Format as currency and co...

I have a worksheet that I use over-and-over again. It has several columns of data, and some of the columns have long and hard to remember formulas to total the columns. I usually delete the numbers in the columns after I print out the worksheet, leaving the formulas intact at the bottom of the columns. Being human, I occasionally goof and delete the sum formulas too. Is there a way that I can lock the formula cell at the bottom of the column so that I don't accidentally delete it? Thanks in advance, Malcolm A two step process a) select the cell that you DO want the user ...

Hi all, I want to be able to get the cell reference (in the format A1) of a GETPIVOTDATA reference. For example: =(GETPIVOTDATA("Sum of Qty",'$A$5,"Customer Name","ABC Company")) pulls data from a corresponding cell in the table. That reference is A10 but I want to get this from the actual GETPIVOTDATA reference itself. Is this possible? Regards Morgan ...

good day! i copied a table from a html and paste to excel2000 i try to get the sum =SUM(B5:B10) but the outcome is 0.when i check the number on the cell,i found out that theres a space at the end. i try this formula {=SUM(VALUE(SUBSTITUTE(B5:B10," ","")))} but the result was #VALUE!. Hi! > i copied a table from a html Chances are the "space" is really a char(160) space. Try this: =SUMPRODUCT(1*SUBSTITUTE(B5:B10,CHAR(160),"")) Your best course of action would be to get rid of those characters and then use a simple =SUM(B5:B10). ...