customer cannot send/receive email to/from a 3rd-party these days
One of our customer cannot send/receive email to/from a
3rd-party these days, they sent mail to each other
frequently, the last one was on July 29. It's like some
problem just between email@example.com and john@3rd-
party.com (maybe firstname.lastname@example.org). People in
customer.com can communicate with email@example.com, and
firstname.lastname@example.org can send/receive to/from
email@example.com as well. But they cannot communicate
with each other.
The customer.com is using Exchange 5.5, with front/back-
end structure; to the outside world there is a MailMarshal
server and a smartho...transfer publisher template to word
i have a made a greeting card from a template a friend has offered to print
them out but does not have publisher on his computer but has word on his
computer is there any way to change the format so he can open itv in word??
paul 1 wrote:
> i have a made a greeting card from a template a friend has offered to print
> them out but does not have publisher on his computer but has word on his
> computer is there any way to change the format so he can open itv in word??
You would have to copy/paste the template on your computer, by opening
the Publisher template, then opening Wo...Reservation Form
I have an active website for my business. I built it in Frontpage 2002.
It no longer will send email through the settings I used ( Reservation
form) and I cannot get it to take any of the settings I give it. I do not
think that my knowledge is sufisticated enough. And, I don't think that I am
entering the information completely enough.
I am using a simple form with a single enter button.
Can you help?
May be possible.
Microsoft MVP Expression Web
"FrontPage 2002 on windows XP"
<FrontPage200...Auto populate a form form an open form
I have a main form with customer names and addresses and would like to
add a control button on this form which opens up another form which is
used for recording telephone calls on. What I have been trying to do
is auto populate this call log form with information from the main
form ie name and address?
Please don't re-post the same question twice. You have to be patient and wait for a
reply. Responders are volunteers, and you may not get an answer right away.
Posting twice causes some people to respond to the first post, while others are ...form pozition on screen
I would like to find form position on screen.
It's similar to DoCmd.movesize, but I want discover "parameters' for form
(left corner, top corner, etc)
Are you saying that you want to find out what the current position IS?
If so, you can use something like this:
MyFormLeftVariable = Me.Left
MyFormTopVariable = Me.Top
MsgBox "My Form is at " & MyFormLeftVariable & VbCrLf & MyFormTopVariable
Or however you want to use it.
Access World Forums Super Moderator
Utter Access VIP
Tutorials at http://www.btabdevelopment.com
___________...copy properties Under forms
I'm wondering if someone can help me with something on copying properties.
I've checked the access help but can't find anything there.
This is what i want to do.
I'm copying text boxes, labels that has caption, name and other information
in the properties that i want to keep when i copy the information to another
tab on a form.
Is there a way i can copy the property information without doing alot of
manual work by going into each text or label box.
I hope this makes sense.
thanks for you help in advance.
When you copy a control, everything about the cop...What is the purpose of 'Dummy' window in the Command forms
I am wondering why GP has Dummy window with title "~internal~" for the
Command forms. For example Command_Financial form has Dummy window
Do I need to create Dummy window for my Command forms. If so why I need it.
Any comments appreciated!!!
The Dummy window is there as a placeholder. It really doesn't do anything,
but should be there in order for the form to work properly since your form
needs to be open for the commands to be available. The title ~internal~
just prevents this window from showing up in the Security assignment
windows. Make sure that...Cannot open the Insert object (Pdf file) form Excel 2000(9.0.8968 SP-3)
I am no idea why I cannot open the embedded object (Pdf file) inside Excel
file which using Windows ME.
Once clicked the object icons, then it shows the error message likes
" the embedded object cannot be opened by the source application"
I used the Adobe reader 6.01 as the source application.
Actually, I searched the related forum from the Internet. However, I cannot
solve the problem.
I can't test 2000 in ME, but it works fine in 2003 under XP.
If this helps, please click the Yes button.
&q...Form class module for non-existent form
After copying a form with a class module, something went wrong. I now
have a class module for the new form, but the form no longer exists. I
am unable to remove the in-limbo class module. I want to use that name
for my form, which is not possible as long as that class module is in
How do I get rid of the in-limbo class module?
I've tried repairing tha DB as well as "msaccess /decompile" but it
A class module is not part of a form, but a separate module. It sounds like
your 'in-limbo' module is...Send as distribution list in Exchange 2003
Our company would like to create a generic distribution
list with a few members to receive external emails (E.g.
firstname.lastname@example.org). And when the DL member replies, the
reply will be sent from email@example.com instead of the
user's own address.
I've tried to grant various permissions on the DL to the
members, including Full mailbox access. However the DL
member cannot send from DL address.
Outlook returned an undeliverable email said "You do not
have permission to send to this recipient. For
assistance, contact your system administrator."
Server: Exchange 2003 SP1
C...Setting the Windows Cursor during Form Processing
I would like to force the mouse cursor to immediately become an hourglass
when some long processing/quering commences on a form. it appears that it
takes some time for Access to show the hourglass and usually only after the
user clicks the form a couple of times because there appears to be nothing
Is there an easy way to do this from within Access..
I have done it in VB6 using Me.MousePointer = vbHourglass but this does nto
work in Access.. any suggestions?
Screen.MousePointer = 11
guess this does it?
"jeff" <jeff@work...Saving changes to a previously created template
I am having a frustrating time updating my paperwork to bring it all up to
date, please read below.
firstly create your would be template
save as - name.dot or .dotx
then close the template and close word down.
open the template you just created
make changes to template
at this point this is where I have a problem!
try and save the template with the changes with the same name
I get a message saying
Word cannot give a document the same name as an open document,
Type a different name for the document you want to save.
this worked perfectly fine in office 2003...Position 2nd Form according to 1st Form
I have 2 Forms. When the 1st Form is openned and want I open the 2nd Form, I
want it to position itself about 15cm form the Left and 20cm from the top of
the 1st Form. I am using Access 2003, Thanks.
"AY" <AY@discussions.microsoft.com> wrote in message
>I have 2 Forms. When the 1st Form is openned and want I open the 2nd Form,
> want it to position itself about 15cm form the Left and 20cm from the top
> the 1st Form. I am using Access 2003, Thanks.
You should be able to use Nicole Calinoiu...TOURNAMENT FORMS
Need tournament draw sheet single elimination template.
You may find some old NCAA basketball tournament forms out on the web.
> Need tournament draw sheet single elimination template.
...Run Macro only if certain form is open
I have programed a maco to open one of various forms depending on criteria on
an open form. Is there a way to run a "follow up Macro" based on which form
opens? In other words can I run a macro based on wheather a certain form is
Take a look at the RunMacro Method of the DoCmd object. You can have it as
part of the OnLoad of the form in question.
>I have programed a maco to open one of various forms depending on criteria on
>an open form. Is there a way to run a "follow up Macro" based on which form
>opens? In other w...Forms and Input Data
I created a report form on Sheet 1 and a set of input data on subsequen
Sheets 2, 3, ... link to the report. The report is to show informatio
on either of the data I select.
Are there simple steps for me to pick either set of data I want t
display on the report? I've thought of a pull-down menu so that if
select "1", the report will show data set "1", and so on. Yet I don'
know how to do it. I tried the "replace" command by highlighting al
the cell in the Report sheet then type "2" in place of "1" to replac
the data set then hitting...Modal form opens on startup
I hope this doesn't come across as stupid, but I'm almost completely
unfamiliar with Access. A client of mine has an Access 2000 database
containing some business information, and he'd like to have me import
it into Quickbooks. The problem I have is that I cannot get to the
information to export it from Access.
When the file is opened, I get a (I presume) modal form, configured as
a 'splash screen' type of thing. Has my client's logo, and the name of
the fellow who wrote the Access app.
Click that, and it closes, then opens another form for...how do i find and open a template i developed?
...Windows Live Messenger-no send audio
Windows 7 installed, Windows Liv e Messenger 2009 (build 14) installed in
Acer Netbook Aspire 751h-1948.
After installing W-7 in this unit WLM worked fine for both video and audio.
After a while it started clipping on both send and receive audio.
I downloaded the recommended Realtek driver for the High Definition Audio
Device which is 184.108.40.20654. After reinstalling it, there was no send audio.
I see audio on the sound bar of the properties, I can record my voice and the
far end will hear the recording, the mic level is set properly.
To correct this problem, I have reinstalled WL...Trying to delete form border, and it deletes all borders
I made a form with several individual areas that have borders. At the end I
decided to try a border around the whole form. Now that I don't like it, I
was trying to delete the form border, but it deletes all the borders in the
form as well. How can I just delete the border around the form and not the
rest of the individual borders? I'm actually on a different computer,
because of the printing, will I be able to undo my way out of it maybe, or
do I have to be on the computer where I made the form. One more question,
will the form retain the undo feature for ever, or will it stop ...how to solve "Non-modal forms cannot be displayed in this host application"
I am trying to make a modalless form in VB6 that is compiled as an
ActiveX DLL. When i use VC6 to instance the activex DLL, my problem appears
"406 Non-modal forms cannot be displayed in this host application from an
ActiveX DLL, ActiveX control or Property Page."
I have my form in modalless style in VB6 and they should be instanced in VC.
Does anyone know how to get this to work ?
Nish [VC++ MVP]
"arbidol" <arbidol@tom...Temporary Form with 2 Sub form Update Main Form And its Sub form ?
I have 2 table both are exactly same
PatientRecordTransTb And PatientRecordTb
I know many programmer don’t like TempTb, but in my case I don’t trust some
one to mess
with my Main record table. So simple solution is make tamp table and after
review I click to transfer all records from temp Table to main Table So I
have two forms .
PatientRecTransFm record sources = PatientRecordTransTb
PatientRecordMainFm record source = PatientRecordTb
PatientRecTransFm has 2 button AddRecord And Delete Record
Here is a short story of my code (NOT A Actual Code)
mySQLString = &quo...Customization to a Contact Form Does NOT Stick
Everytime I try to add a field in a Contact form, the change does not stick.
I have administrator rights, followed the instructions to customize a form to
the t. The instructions entailed going to:
Home -> Settings
Settings tab -> System Customization
Record Management -> Contacts
-select fields to add
ok - > save work
On the CRM server
Start -> Programs -> Microsoft CRM -> Deployment Manager
Right click: Deployment Manager -> All Tasks ->Publish Customization
Select form customized
After performing these steps, I get b...I need book lending forms
Please I need your help, I'm looking for book lending forms in order to keep
control of which books I'm borrowing and when they have to be returned to me.
...Using list box to open forms
I have a list box that lists all the forms in my database. I would
like a user to be able to double click on something in the list box,
and have it open the corresponding form. Any help on how to do this
would be appreciated.
On Wed, 24 Oct 2007 16:35:22 -0000, firstname.lastname@example.org wrote:
> I have a list box that lists all the forms in my database. I would
> like a user to be able to double click on something in the list box,
> and have it open the corresponding form. Any help on how to do this
> would be appreciated.
Code the list box Double-Cli...