Filters *SOS* Filters *SOS* Filters *SOS*
1) On formLoad, I need to show only those items which are unassigned.
2) I need for the end-under to select only the items they are assigned to.
3) I need an option to select "ALL" so I can view all items.
Any insight offered would be appreciated!!!
On Wed, 29 Aug 2007 16:24:01 -0700, valdaiway
>1) On formLoad, I need to show only those items which are unassigned.
Use a query to put a criterion on the field that defines the assigned status.
I assume you know how that information is stored in your table; nobody here
does, ...Criteria for Advanced Filter HELP
I have what I think is a simple question that I need answered IMMEDIATELY.
I have a spreadsheet with 20 fields and I want to filter it so it only shows
records that have something in of any of 5 of those fields. So once
filtered, I will not have any records that have all 5 of those fields blank.
I know I have done this before but I'll be damned if I can remember or find
You all are teaching me so much
don't cross-post -- answer supplied in misc NG
"knowshowrosegrows" <firstname.lastname@example.org> wrote in
message news:ACBC0...Employee Filters
On the employee filters in the HR Preferenes window, would this restrict
seeing employee information in both Payroll and HR?
Also, would it restrict reporting on certain employees in a division or
Your message does not indicate which version of Great Plains you are using.
Using 8.0 with SP3 applied, HR filters do apply to some of employee
information outside of HR. The settings will filter selected forms,
Smartlists and Lists items. The HR filter setting do not apply to reports
outside of HR.
The filtered forms are: Employee Maintenance,...Filtering based on a filter
I have an Excel Worksheet with a Pivot Table at the top
with a Filter and a data set returned from a DB2 database
below it. I would like to filter the DB2 data set based
on the Pivot Table filter that is enabled. Any ideas?
You can't filter two ranges on the same worksheet.
You can, instead, drill-down on your pivot table, which will show all
items that go into the value on a newly created separate sheet. The
drawback to that is that you cna only drill down on one item at a
time, and it is a separate sheet.
MS Excel MVP
"James" <an...Question on the IMF filtering in exchange...
I installed the IMF filter last night and it works great, with one
I set both thresholds to the same (5) and got almost all blocked emails into
the archive that were junk...So that is good.
However I had some users report that there was mail in their junk folder
that should have been good Inbox mail.
This I undersyand and can live with as folas-positives...the problem is,
since both settings on the folter tab were set to 5, how does it know to
send the mail to archive rather than Junk folder?
Why wouldn't it just send them all to archive if both settings were at ...Filtering without Filter
I just don't get the following. Any ideas?
"A" row I have two different values I use: "Contact" and "Not a contact".
"B" row I have the person's name (employee).
"C" row I have a quantity, just one number.
Now what I need is to output quantities of how many Contacts Employee1 or
Employee2 or Employee3 have.
Also what I need is to get the number of contacts - which can be found on
Should I use COUNT.IF ? Row A can have 2 or more different values so should
there be somekind of conditional IF function included?
Hi, can ayone tell me how I could do the following in excel 2007 or
Sam M Jones
John M Jones
Colin S Attwater
Steve J Jackson
Brian B Mathers
James B Mathers
Martin G Raggy
Patrick S Thomson
What I want to do is filter the dataset on 'Trainer' so that it only
shows me the Trainers who feature once in the list. So if I was to do
this properly it would only show S Attwater and G Raggy as the other
trainers have more than one horse.....
Hopefully someone can help because it is driving me crazy !!
Give this macro a try...
Sub HideDuplicateTr...Junk filter BEFORE other filters?
I am running Outlook 2003 and the Junk filter was working really well.
Then I started making other filters...one of them looks for my domain
name in the headers and if it's there it moves the email to a folder.
Problem is, this filter seems to activate before the junk filter, so
the junk sn't being filtered now! How can I set the junk filter to do
it's job first and THEN to run my own rules?
Bryan Anderson <www.anderson-it.com>
I created this rule and set it as the first rule to run:
Apply this rule after the message arrives
'X-Spam-Level:******'or'...Pasting into a filtered list
Can anyone tell me if it is possible to paste a list of price updates into a
filtered list. - I have filtered the list to show just the products whose
prices need to be updated, when I try to paste the updated prices, into the
list, the prices are not just pasted into the visible cells but the hidden
cells between. Can I paste into the visible cells only or do I have to
update each line manually. I am using Excel 2002
Any help would be much appreciated
Can you sort the list to bring the products that need updating together in
the list? If not, try something like this:
Your list of product...Macro to copy a VLOOKUP formula
I was wondering if somebody could help me with this macro…
I have some data with a filter on, so that only the rows with blank cells
I want to enter a VLOOKUP in the cell, and copy it down to all the blank
cells. I tried just recording a macro, but when I run the macro it doesn’t
Any ideas of how to do it?
Before the filter:
Colums A -B - C
A x x - 1st Row
A - 2nd Row
A x x - 3rd Row
A - 4th row
A x x - 5th row
After the fil...apply filter macro
I have a access db that works on win xp but does not work on win 2007
I have a combo box that triggers a apply filter macro using a query sort.
no problem on win 2000 or win xp or win 2003
...IP filtering based on corresponding MX records
How can I implement the following?
Used: Exchange 2003 SP2 in FE/BE configuration;
FE is in perimeter zone (capable to “speak” with DNS, BE, DCs and retrieve
So, somebody connects my FE to sent an e-mail to one of domain users.
I need something like that:
When connecting, see the “mail from: email@example.com”;
Verify if there is a record MX for the IP address from which the connection
was established in DNS for the domain “somedomain.xxx”
If not – drop connection
(attention: MX record, not SPF)
Is it possible with Exchange 2003 SP2 only?
I be...Month Filter
I keep a log of checks that I receive in my department throughout the year.
I have the checks listed by date (mm/dd/yy), payee, check #, etc. What I
want to do is be able to filter the list by month (ex., March 2005). Is
there a way to do this?
You can Try EasyFilter Joseph
Regards Ron de Bruin
"Joseph" <firstname.lastname@example.org> wrote in message news:%23lQNnTawFHA.464@TK2MSFTNGP15.phx.gbl...
>I keep a log of checks that I receive in my department throughout the year. I have the checks lis...filter for missing values in a range
I have a list in Col A ( about 2000) one to four digit numbers. I would like
to ( for example) , in the 700's be able to filter and find out which of the
numbers from 700 to 799 is NOT in the list. I know how to copy and paste
to another col, etc.
Thanks in advance for the wonderful help all of you give.
One play ..
Assume your source data runs in A2 down
Copy B2 down by 100 rows to cover the full spread of numbers to be checked,
ie # of nums from s...Using a form in Excel to Filter
I would like to create a form in Excel that is similar to a form in
Access. This form will hold all fields on the underlying spreadsheet
and enable the user to sort using combo box dropdowns. Ideally, the
form would have a button titled RUN that will take all the data the
user selects in the combos and filter the underlying spreadsheet.
Can this be done?? If so....you will save my life!
Try this Add-in
Regards Ron de Bruin
<email@example.com> wrote in message news:1122677766.648239.226910@z14g200...Filtering
Is there a way to filter messages that contain embedded
Or even better, messages that only contain embedded images
and no text?
...filter driver for an USB modem
I am working on a NDIS filter under Windows 7 64 bits. The filter is
working well as NetService Class with classical Ethernet Adapters. But,
it does not work with an USB Modem with "Modem" class.
Packets handled by the modem are not sent to the filter. How can I get
them ? I suspect I should register the driver in another manner.
> Packets handled by the modem are not sent to the filter. How can I get =
> them ? I suspect I should register the driver in another manner.
You need to support PPP in your filter, this requires ...Reverse filter?
Is there a way to do a "reverse" filter. I'd like to be
able to hide or delete rows that match specified criteria.
Unfortunately not, but depending on how you are filtering you
might be able to use
For the autofilter you might have to use another column (F)
F1: 'white -- value of cell you don't want to match
F2: =TRIM(F$1)<>TRIM(E2) and fill down
David McRitchie, Microsoft MVP - Excel [site changed Nov. 2001]
My Excel Pages: http://www.mvps.org/dmcritchie/excel/excel...Data Filter Question
When I am trying out different data filter criteria, is there an easy
and fast way to go back to displaying *all* data without clicking on
the drop arrow and selecting All? I am using Excel 2003. Thank you.
I've added an icon to my favorite toolbar:
Tools|Customize|Commands tab|data category
Drag the "Show All" (and maybe autofilter) icon to a toolbar.
> When I am trying out different data filter criteria, is there an easy
> and fast way to go back to displaying *all* data without clicking on
> the drop arrow and selecting All? ...Filtering Low Cardinality Columns on SQL 2005
I have a view which is a 5 table join. One of those tables is 1.5million
rows. When doing select on this view, the conditions are as follows:
1. compare if equal a column to a literal, with 2 distinct values,
2. compare if equal column to a literal, with 5 distinct values,
3. compare if equal column to a literal, with329 distinct values,
4. compare if less than date column to literal, with 1.2 distinct values
All of the above columns are from the large table, mentioned above. This
table has a compound primary key.
Looking at explain plan, an index scan is being performed ...Advanced Filter #4
I used advanced filter to combine duplicate rows into a unique row. However,
the duplicate rows are still there. If you go to the Data menu and click
Show All, the duplicate rows are displayed again.
My question is, after filtering out the duplicate rows, how do I get rid of
them, not just hide them?
Use "copy to" instead of "filter in place." The copied-to is your unique
mvpearl omitthisword at verizon period net
"Greg" <firstname.lastname@example.org> wrote in message
news:OpvFHg...Junk filter not filtering!
I'm having problems with the junk email filter. It's set on high
protection, but none of my emails are getting filtered. What seems to
be happening is that junk email is received, sent to the junk mail
folder, but then immediately moved to one of my other folders as
specified in one of my other 7 custom e-mail filtering rules that I
have created. I use the custom email filtering rules to sort out emails
received from different accounts into different folders, so what I
really need is that either the junk email filtering kick in after all
the custom rules have been processed or els...Edit/Add to E-Mail Filter
Is there a way to add to or edit the info in the junk e-
mail filter for outlook?
McCue <email@example.com> wrote:
> Is there a way to add to or edit the info in the junk e-
> mail filter for outlook?
Nope. You can add to the Junk Senders list, however.
...Filtering a filter list
I'm using Excel 2000. I have used advanced filtering to extract a se
of data from one worksheet to another worksheet. I now want t
eliminate some of this filtered data to further refine my search. If
use the auto filter feature ("does not contain") on this new workshee
it does what I need but only allows for 2 criteria and I have 5 or mor
that I need to filter out.
Is there a way to expand the auto filter to allow more than 2 filters?
If not, I assume I can create a criteria table, but what is the forma
for "does not contain"?
Message posted from http...Connection Filtering #4
I'm using IMF with the IMFAM tool on SBS2003 SP1 /Exchg SP2.
I want to create white lists at the exchange level (3rd party mail client
used which uses pop3 to collect mail from exchange).
I would like to clarify that this should be done at the connection filter
level by IP address only.