sum by coding without 0 #2
in the following program if there is no value in the cells a1 and b1
it returns 0
Public Sub Add2Cells()
Range("C1").Value = Range("A1").Value + Range("B1").Value
i need only the output if the both the cells have the data will you
can tell me that
Public Sub Add2Cells()
If Range("A1").Value <> "" And .Range("B1").Value <> "" Then
Range("C1").Value = Range("A1").Value + Range("B1").Value
(there's no email, no ...help !!! lost floppy 2 / 2 of my back up file
I still have floppy number 1 and it's fine,
Is there a way I can recover at least the data on that floppy?
On doing the restore, after finishing floppy 1, asks for floppy 2, but i
don't have any and it aborts the restore process.
Any idea, what can i do?
In microsoft.public.money, Fife wrote:
>I still have floppy number 1 and it's fine,
>Is there a way I can recover at least the data on that floppy?
>On doing the restore, after finishing floppy 1, asks for floppy 2, but i
>don't have any and it aborts the restore process.
>Any idea, what...Text to columns question
I have some data in the following format:
Number firstname lastname schoolname
The first three fields are one word each. Schoolname can be more than
one word. I'm trying to parse the data using the data -> Text to
Columns wizard, but I cannot figure out how to tell the wizard that
there are only 4 space delimited columns in my data and not 5 for
those instances where the schoolname is two words.
Any help is appreciated. Thanks.
On Jan 22, 9:50 am, MikeB <MPBr...@gmail.com> wrote:
> I have some data in the following format:
> Number firstname lastname schoolname
>...Upgrade Path sbs2000/sbs2003r2 and CRM1.2/3.0
We currently have CRM 1.2 installed on a sbs2000 server. We are looking to
upgrade this server to sbs2003r2 and we also want to upgrade CRM from 1.2 to
3.0. Can someone recommend the best upgrade path?
This is partial book smarts and partial experience...
Upgrade to CRM 3.0 on the SBS2000 box (assuming SQL 2000)
Redeploy to SBS2k3R2 box using CRM 3.0 redeployment tool
Upgrade to Rollup 1
My experience was to take it from a 3.0 to 3.0 on R2, so I had a SQL 2000 ->
SQL 2005 on a new domain. I recommend that you backup and follow the
directions to a T.
The up...Address Book Problem #2
Outlook version: 2003
When in a Distribution List, I click on [Select Members] and get this MS
Office Outlook message:
The list could not be displayed. The Contacts Folder associated with this
address could not be opened; It may have been moved or delected, or you do
not have permissions. For information on how to remove this folder from the
Outlook Address Book, see Outlook Office Outlook Help.
This is a recent problem.
Sounds like you have an invalid reference to a Contacts Folder. reset those
Tools > E-mail a...Text on cart based on data in a cell
I have a chart on a separate sheet witch is based on a filtered list on
another sheet. I would like to label my chart to show witch filter as been
applied, is this possible? (Ho, and if so, how would I do it?)
Thanks for any help.
Select the chart, press the equal key, then select the cell with a
mouse. This adds a text box in the middle of the chart, which you can
move around and format as needed.
Jon Peltier, Microsoft Excel MVP
Peltier Technical Services
Tutorials and Custom Solutions
> I have a chart on a separate s...Setting up Outlook 2003 #2
I am in the process of setting up Outlook 2003 on my new computer. I believe
I may have click the wrong answer and have put in incorrect information for
outlook to start. I keep getting a box that ask for Username and passcode.
When I put in the information I think it should be, I receive this message:
Unable to open your default e-mail. The file C:\Documents and
Setting\Owner\Local Setting\Application Data\Microsoft\Outlook\outlook.ost is
not an offline folder file.
Please tell me what I should do. When I click OK. Outlook closes. Thanks.
Trying to keep up with technology
is there a formula for a continues monthly calendar?
not exactly sure what you're after here but if you enter
01/01/05 in a cell and drag down (autofill handle, little back cross bottom
right of cell) it will increment by a day for each row.
If you'ld like more assistance please feel free to post back with additional
"tg" <email@example.com> wrote in message
> is there a formula for a continues monthly calendar?
...Word as a Text Processor in Outlook w/ Exchange
Sice I set up a new Microsoft Exchange Server account in my Outlook 2003
SP2, I can't use any more Word as a text processor to write my e-mails.
I only have the HTML option.
So I don't have the nice Word feature (real time spell checking, etc.). Too
Any idea? Is there something I missed to set up on the Exchange Server?
Check from within Outlook. Tools/Options/Mail Format and make sure you have
the option to use "Microsoft Office Word 2003 to edit my email messages"
"Nicolas Macarez" <firstname.lastname@example.org> ...Mails Combined
I mistakenly delete all mails from Inbox and then found them on the deleted Items and selected all and ask to move folders back to Inbox.
the problem is all mails were combined into one email and moved back in to Inbox as a single email.
How do i go back to the original version. How do i uncombined all the mails in to individual mails from the right recipient? Please help ASAP..
Submitted using http://www.outlookforums.com
...Find/replace with different text colour messes up
When doing a Find/Replace on a certain word that needs to have a different
colour than default - say, red - Excel incorrectly colours the whole cell
instead of just the word that was searched on.
To see this in action, try this:
1.. Open up a blank Excel sheet
2.. Enter some text in a few cells - "This is a test", for instance. Now,
let's try to use search/replace to colour only the word "test" in red.
3.. Open up Search/Replace
4.. On the "Search for"-line, enter: test
5.. On the "Replace with"-line, enter: test
6.. For the "R...text in received emails is very small
A friend has Office 2003 and he uses Outlook.
He is an older gentleman who's been running his own business for decades,
and he uses Excel with lots of tabs in his worksheets.
Here's the situation:
In changing his monitor from 800x600 to 1024x768 so he can read more of the
Excel tabs, the text in the body of his received emails is very small.
Headers and folders are normal as well as typed text in created emails.
Did you check the zoom settings? HTML sizes can be changed on the view menu,
plain text in tools, options, mail format, stationery and fonts. Or ...text function question
Hopefully my confuse is not so difficult to help.
I have text arrays in column A2:A100 (much datas) which are filled with "n"
and such as "loose end", "soft". I want in the column A1 is containing the
text excludes "n".
Due to of my poor function knowledge i tried to use CONCATENATE function but
this is too long ..what should i use the proper formula.
txs in advance 4 any helps
One guess ..
Assuming you want to extract text within A2:A100
that does not contain the letter "n", give this set up a try:
Put in B2:
I need to merge about 75 worksheets into one spreadsheet on a regular basis -
all have exactly the same format/layout etc back can vary in the number of
Try this Jeff
Regards Ron de Bruin
"Jeff224" <Jeff224@discussions.microsoft.com> wrote in message news:C6790506-2888-4F4D-80EA-BB0D9F9B27A2@microsoft.com...
>I need to merge about 75 worksheets into one spreadsheet on a regular basis -
> all have exactly the same format/layout etc back can vary in the number of
http://www.rondebru...Automatic settling of EDC Batch #2
Is there a way to stelle an EDC batch automatically in RMS, or an add-on that
accomplishes this? This would be very handy. Thank you in advance.
...Notification if no external e-mail recieved for over 2 hours.
Recently the SMTP authentication settings were changed so that no
external e-mails could be recieved. There was no way to see that this
was the case until someone complained. Is there any way to monitor
externally recieved e-mails so that if none are recieved after a
certain amount of time for a notification to be generated? In this
case a script using telnet could be used to check if e-mails could be
recieved externally, but I was looking more for something like if no
external e-mails recieved by any users for two hours then create
notification. I can't seem to think of any way to che...Adding ", " to concatenated text
I have a control that is to display in the On Enter event, a concatenated
sentence including the users choices in a multi-select list box. The code is
mainly from nice people here which I've taken bits from and added to and it
almost works except for getting a comma and space between the entries. Here
is the result I'm getting:
"There is damage to A/C systemCooling systemDecklid/tailgate,."
I want it to be:
"There is damage to the A/C system, Cooling system, Decklid/tailgate."
Here is my code:
Dim varRow As Variant, strText As String
strText = vbNull...Incoming e-mails only in plain text
I have just started using Outlook as my mail / contacts / diary client
and have hit a problem. For some reason it is only displaying incomin
e-mails as plain text. My previous clients had no probs showing th
more complex ones (?HTML) with pictures and flashy bits. Now all i
just plain. I have scoured the options menus to see if something ha
been switched off; I have set the outgoing text format to HTML; but al
to no avail. Even the smileys I send come back simply as hyperlink
when people reply
~~ Message posted from http://www.ExcelTip.com
When will Money start using the the free MyCheckFree.com? This a free service
now. What gives.
Boo Microsoft. I may need to switch.
Yikes! So why am I socked with a $5.95 monthly fee? Just because I use it
within the Money program? I don't use my bank so not sure why I get the
"Bogee" <Bogee@discussions.microsoft.com> wrote in message
> When will Money start using the the free MyCheckFree.com? This a free
> now. What gives.
> Boo Microsoft. I may need to switch.
...Finding the combination that appears more times
i have a list on excel 2007 that displays the purchase of items on columns
A:E, each column showing one (1) item
I want to find what combination of items appears more times, especifically,
which combination of four (4) is the favorite mix
A B C D F
A C D E F
B C D E F
B C D F Z
in this example, the winner would be (B, C, D, E) as it appears 3 times
the main problem is that I have over 1,000 rows
and trying with =SUMPRODUCT(COUNTIF(A1:E1,$N$1:$R$1)) por each combination
would take forever...
is there a simpler, quicker ...convert #2
I have my checks on version 6 of quicken. It's backup file is qdb. It
wouldn't run in this new vista machine so I bought the 2009 version. It
says in black and white in a hard to find instruction that it has changed
format and will not import my old files, it uses qif. I returned it and got
my refund check today. How about that?
My question. If ms money will import my old files, I want to buy it. If it
will not, I don't want it. I have been looking and can not find anywhere it
says one or the other.
In microsoft.public.money, Glenn wrote:
>I have my checks on ...forecast function help #2
Just to clarify that formula, am i right to say this?
$E$1 - is selecting the forcast for year 2004
B2:D2 - is selecting all the data bar the years in the top row
$B$1:$D$1 - is being used to predict the outcome for 2004
Is that right?
method's Profile: http://www.excelforum.com/member.php?action=getinfo&userid=1503
View this thread: http://www.excelforum.com/showthread.php?threadid=26644
B1:D1 are the x values there B2:D2 the associated y ...Combining Publications
Can I combine two different publications into one?
> Can I combine two different publications into one?
Personally, I would simply open two instances
of Publisher (one document in each) / tile the
two screens...and copy/paste.
Maybe the following link will be useful:
Combining Publisher Documents
MS Picture It! -
Digital Image MVP
Highlights and FAQs
This is not tech support
I am a volunteer
Solutions that wo...How do you force another line in a text box?
When using text boxes. how do you force another line when character spacing
reaches a certain point.
A text box is a single line. Full stop.
A text area will automatically wrap when the user types to the end of the
visible space - this does not, however, add a line feed.
To add a line feed after a preset number of characters, as I said in an
earlier post, you need server side scripting which parses the data, and adds
the line feed at the required intervals. Of course, this is complicated by
needing to account for spaces between words - and avoiding the line feed in
the middl...How do I unwrap text to columns?
I have a spreadsheet where the addresses have been saved as wrapped text in
one column. I want to spilt the addresses into columns as Address1, Address2
etc but I can't enter the wrap character (which I think is ALT+ENTER) as a
delimiter in the Text to Columns wizard.
I have also tried search and replace but again Excel will not recognise
ALT+ENTER as a delimiter
Any ideas much appreciated! Thanks
Re-format the column to eliminate the wrap.............then use Data >
TextToColumns with Alt010 (from the keypad) as the delimiter
Vaya con Dios,