How do I set up an argument which asks for multiple criteria
I am trying to use an argument that asks for one of three criteria (2345P,
8319T, or 7026J) in cell C108, and if it finds it, enters the amount of yet
another cell, G108 into cell K108, and if not enters 0 into cell K108.
It seems there are too many arguments for the "if" argument, and I can't
seem to get the "lookup" argument to work either.
Is there another argument I should be working with?
> try in K108
> =if(or(c108=&qu...setting up new outlook mail account
i can not set up a new account on my outlook, i keep saying establish network
connection with a correct sign but searching for my mail account shows X
can you please advise
Are you trying to setup a POP3 mail account or an Exchange account? Also,
what version of Outlook are you using?
"rashid" <firstname.lastname@example.org> wrote in message
> i can not set up a new account on my outlook, i keep saying establish
> connection with a correct sign but searching for my mail account shows X
> ...OWA Set Rule problem
I have successfully install the Exchange 2003 with SP1 in the Windows Server
2003. Anything alright exclude the rules function in OWA. I try to set the
rules from any then "move to" or "copy to" specify folder are no problem,
but "forward to" other email address, its don't work. I try to input the
email address in the contact and then select from the contact, but the result
also don't work. The rules can save and I can receive the incoming email in
the Exchange 2003/Outlook or OWA, but it don't forward to my specify email
address. I try to...How do I set the 'Set Synchronizing Client' field
We have a number of outlook clients using CRM that have the 'Set
Synchronizing Client' select box greyed out. We need to tick them so that
they are able to synchronize tasks etc.
Can any one help me find out why these are greyed out and then set them so
that they can synchronize
In my experience, that checkbox is always greyed out for the first
install that is performed for a user. The only time that checkbox
becomes active is if a second copy of CRM is installed for a user who
already has CRM installed on another PC....
Normally the box is checked and grey. If that is...Access
I have a table that has 9 immunization dates in each record. I need to
capture the most recent date for a report. All the information I have found
refers to comparing dates between records, not within a single record.
Can I suggest you split your table. It's quite simple.
1st Make a copy of your database and work on the copy (just in case)
Open the copy of your database
Copy the table and paste with a new names
tblA - tblB
Open table A and delete all the immunization dates
Open table B and delete everuthing "except" the immunization dates and the
ID fiel...range of dates schedule
I am trying to make a spreadsheet to show me when and how much a too
was checked out of my work.
i am inputing the dates and i would like the spreadsheet to tell me ho
many days in each month it worked.
please help, i have been working on this for 2 days
Message posted from http://www.ExcelForum.com
With your "Start date" in A1 and your "Finish date" in B1, put the following
formula in C1 and format the cell for Number with no decimal places
Vaya con Dios,
"Coy Bruner >" <<Coy.Bruner.email@example.com> wrote ...How to set backcolour
I have a continuous form containing a number field (long integer) called
[v_colour]. This field contains the number of a certain colour - as per the
numbers that are used in the format properties for back colour etc. I would
like to set the back colour for the form's [v_colour] text box to be the
value of the field:
If the value of [v_colour] in the first record is 255, I want the back
colour of the textbox for that record to be bright red.
I tried this as the OnLoad event for the form:
[v_colour].backcolour = [v_colour].value
.... but this resulted in the back colour of...Applying Percent Decrease Across Set Periods
I have a column which includes dates when items were purchased. I have
used the DATEDIF function to find the number of years between that date
and today's date. I now want to decrease the purchase amount 10% for
every year calculated via the DATEDIF function.
Any ideas, is this possible, why can't I think...?
Hunt&Peck's Profile: http://www.excelforum.com/member.php?action=getinfo&userid=32961
View this thread: http://www.excelforum.com/showthread.php?threadid=527873
...Conditional Formatting: > and < a date
I am trying to use this forumla as a Conditional Format
It does not work. If I remove the 0< or <=10, it will work. Any
"Brad P" <firstname.lastname@example.org> wrote in message
>I am trying to use this forumla as a Conditional Format
> It does not work. If I remove the 0< or <=10, it will work. Any
Excellent, thanks for that!
"GerryGerry" <Gerry@Ger...Set Regional Settings but not Language
I have a multi-language APP
en-US, es-ES, it-IT
I usually change Languages and Locales by using the CultureInfo
to switch Languages
System.Globalization.CultureInfo myCI = new
My issue is - what if the user wants to View App in english and use the
Regional Options on a PC in say Spain ???
If I change the CultureInfo to en-US then they can view APP in English (
English satelite assemblies) but date and numbers will be in US format
If I change the CultureInfo to es-ES then date and numbers will be in Spain
forma...Work Hours setting excludes specified hours from Scheduling
I am miffed by this problem. I specify a work hour schedule for a user.
When I schedule a CRM User as a Resource for a Service in Scheduling of a
Service Activity with Requested Time of ASAP and click Find Available Times,
the values for Avilable Times returned are outside of the Work Hours I
specified for the user and not within the work hours. When I drill into the
Work Hours for this User, the Calendar view shows Cross Day rather than
8:00AM - 5:00PM I speciied for work hours and editing the hours reveal the
correct hours in the Work Hours. What gives?
Never mind. Figured out w...Reading Pane Settings
I did a search for an answer to this question and have not found one. If I
missed an answer already posted, please direct me to the right place.
I have Outlook 2007 and set up the "right" reading pane for my e-mail. Now
when I go to my calendar it is set up the same way - calendar on the left
(same size as the inbox) and then there is a blank space to the right that is
the size of the reading pane/preview. To the right is the to-do bar (which I
have no problem with). I don't know why there is a reading/preview pane on
the calendar when there is nothing to preview, and I...Outlook "Arrange By" option does not retain its setting
In outlook 2007, I use a custom view for my inbox, and I have the Group By
option checked to"Automatically group according to arrangement."
This has been workn flawlessly until today, when I realized Outlook did not
like a particular mouse click; perhaps I clicked on the border of two options
or some other anomoly that caused the window toflash once. The end result
was that my Arrange By option changed to "From" when I had previously set it
to "Conversation." Now, whenever I hange it backto "Conversation," leave the
inbox and come back, ...interactive buttons, multiple sets
I'm sure one of you good folks will save my bacon as usual
I have a series of websites, all of which exhibit the same odd behavior with
I have a bunch of buttons in the left margin, each of which pulls up ( lets
call it ) a chapter, and in each 'chapter' are a number of related pages.
On the top of each page is an imbedded page which has 'page numbers' for all
the 'pages' in that chapter. So, it's a grid where the 'vertical' buttons in
the left margin and the 'horizontal' buttons at the top comb...How do I set OOR
I have searched the help menu and have had no luck finding out how to set my
outlook 200 to send an OOR (Out of Office Reply) Any assistance would be great
If you are in an Exchange environment (ask your administrator if you do
notknow) you can set the Out of the Office Assistant which is located under
If you are not in an Exchange environment you can create a rule that replies
on all e-mails. The downside of this is that you'll have to have your
Outlook open all the time for the rules to process. Make sure you set some
exceptions (for instance based on the subject field so ...Dates in XIRR
I was just looking at
http://msdn2.microsoft.com/en-us/library/bb224771.aspx, which states, in
reference to the XIRR function:
"Dates should be entered by using the DATE function, or as results of other
formulas or functions. For example, use DATE(2008,5,23) for the 23rd day of
May, 2008. Problems can occur if dates are entered as text."
Is this something new in Excel 2007?
I've never encountered such a problem with earlier versions of Excel
On Apr 27, 3:07 pm, "Howard Kaikow" <kai...@standards.com> wrote:
> Is this something new in Excel 2007?
No. The H...Java vs. C++ (Date class)
I'm porting some Java code into C++. Which class I should use instead Date
class? Note that Date support miliseconds.
Also, which class I should use instead of Vector class? std::vector?
"Petar Popara" <email@example.com> wrote in message
> I'm porting some Java code into C++. Which class I should use instead Date
> class? Note that Date support miliseconds.
Oh dear. Both the Java and the C++ date classes do assorted odd things with
time zones and "daylight saving"; neither is documented fully or ...Set Focus
I have text box that I input data into and I was wondering if it is possible
to set focus to the text box and avoid clicking on the box. I thought the
term is Set Focus, but can't find any information or example that would help
in doing so. Any help would be appreciated .. PPT 2003.
Look at the following page for code to set focus on a text box:
PowerShow - View multiple PowerPoint slide shows simultaneously
"Phil K" <PhilK@discussions.microsof...How do I print a timeline date range?
I have a timeline that starts in 9/2003 and extends past today. I want to
print only a piece of that timeline: 11/1/2005 to 12/31/2005. How do I do
If you are running Visio 2003, there is an option on the Print Dialog to
print current view. So if you zoom into the area you want, you can print
just what you see.
John... Visio MVP
Need stencils or ideas? http://www.mvps.org/visio/3rdparty.htm
Need VBA examples? http://www.mvps.org/visio/VBA.htm
Common Visio Questions http://www.mvps.org/visio/common_questions.htm
Visio Wishlist http://www.mvps.org/visio/wish_list.htm
&qu...Set published amount of calendar information
Is there any way I can have Exchange 2000/2003 force the amount of time
published in the outlook calendar? I know that you can go into the the
calendar options and set the amount you want published, but is there a way to
have exchange require the amount that is published so that I could get
everyone to publish a year's worth of calendar data instead of one person
being set at 2 months and another at 6 months and another at 12?
On Thu, 29 Jun 2006 06:18:02 -0700, Mike
>Is there any way I c...Publisher 2003 Need to set business card to Avery 5371 setting
I need to set the print settings so the business cardd that I created will
print on Avery 5371 business cards
Okay.........and your question is?
MVP Microsoft [Publisher]
"Jonathan" <Jonathan @discussions.microsoft.com> wrote in message
>I need to set the print settings so the business cardd that I created will
> print on Avery 5371 business cards
Page setup, business cards, click change copies per sheet, type > .5 top, .75
side, zero gaps.
Avery 5371 is a standard business card s...Mofidied On has the same date/time in many items
We have noticed that a large number of activities, cases and leads, suddenly
has the same date/time value in the SQL Server, in the field "Modified On".
Can you tell me how can this happen? Could this happen every time someone
goes offline and has the right to sync these items? Is it a CRM bug? I
cannot understand how can fields take the same value in a batch way, without
If the records have *exactly* the same time I suspect that someone has
likely gonue around the platform and tried to directly update rows in the
database. Th...How do I calculate the number of quarters between two date
I want to input 2 dates and then calculaet the number of Quarters between
then just dividing by (365/4) wont deal with leap years
Depends upon what your rule is, for instance is 30th March to 7th July one
quarter, 2 or 3?
You can use Datedif to get the number of months, =DateDif(date1,date2,"m")
and perhaps divide by 3.
(remove nothere from the email address if mailing direct)
"Adam" <Adam @discussions.microsoft.com> wrote in message
> I want to input 2 dates and then calculaet the numbe...Setting the Settings
Really quickly: How (exactly) does one get Publisher to remember the page
settings I want. ie. every time I open a new document, I get centimeters,
and usually, I'd prefer inches.
I have not been able to find a "Save Settings" option anywhere. Can anyone
In Publisher 2000 it's
Measurements unit box - select inches.
That should do it.
Vancouver, USA - One of the great cities in one of the 45+ countries in
"ThomasL" <firstname.lastname@example.org> wrote in message
ne..."Object or class does not support the set of events" Quick Question
I built a MS Access database in MS Access 2003, which I have set up in
a shared folder. I have a form with some standard components such as
text boxs, bottons. When a user updates the form I wish to record the
time/date and username in the record. I have posted a copy of the code
I'm using for the "BeforeUpdate" event below. Now this works fine on
my machine and updates without a problem. However when a user on
another machine (also using MS Access 2003) tries to update the same
field, he gets the following error:
"The expression Before Update you entered as the eve...