Summing Data Series
I have just created a chart, but rather than show each
data series individually, it has added them together.
Hence the first data series shows the values from Column A
of my Sheet correctly, but the second series shows the
values from column A PLUS the valus from COlumn B,
similarly the third series shows the sum of the values
from Columns A, B and C.
Why is Excel doing this? I am using Excel XP
That is rather strange -- unless, of course, you are creating a stacked
column chart, in which case the behavior is as expected.
If not, how *exactly* did you create the chart? And, what do...Dual Displays
I want to connect my Sharp Aquos flat screen TV to my computer, and see my desktop on both the TV and computer monitor.
Windows Vista Home Premium.
HP Pavilion a1610n computer.
Galaxy GeForce 8400 GS graphics card, outputs: 1-VGA, 1-DVI, and 1-SVGA. There is no HDMI port on the card.
I connected a VGA cable between the motherboard "on-board" VGA port and the TV, figuring that I could use that output to work with the TV. The computer monitor is plugged into the GeForce graphics card.
Tried the Desktop "Display Setting". It says, the number 2 monitor is "N...Display a message box "this entry is a duplicate"
How can I display a message box on a form if the shipment number is a
duplicate? I need a message box to pop up when user attempts to tab out of
Private Sub txtShipNum_BeforeUpdate(Cancel As Integer)
If DCount("*", "MyTable", "ShipNum = '" & Me.txtShipNum & "'") > 0 Then
Msgbox Me.txtShipNum & " already exists."
Cancel = True
This assumes that your text box is named txtShipNum, that the name of the
field in table MyTable is ShipNum...Folder could not be displayed
I am running Windows XP and Outlook Express 6 just fine
then one day my husband does something to my computer and
his email account won't work. My email is working just
fine but in his he cannot open his inbox. It says folder
could not be displayed, and when you send and receive it
gives you this error message:
"An unknown error has occured.
Server:'incoming.verizon.net'.Protocol:POP3, port: 110,
Secure(SSL): No, error number: 0x800C013B"
If anyone could help me with this I would greatly
T...how to display values in 3 cells into one cell
Anyone can help me how do I display the 3 separate different values in 3
cells into just one single cell ?
thanks so much in advance.
Either there was a typo or there's an echo in here.
That line should have been:
= A1 & " " & B1 & " " & C1
"Bradley Dawson" <firstname.lastname@example.org> wrote in message
> In the target cell, type:
> = A1 & B1 & C1
> where A1, B1, C1 are the cell addresses that you want to concatenate.
> If these have number...Display Time in Outlook
The time setting in my Outlook is one hour behind my
actual time. I cannot determine how to change the time.
Outlook is the only item that is incorrect. Other display
times in operating system are correct. Thanks, Jodi
...How to select & display distinct values
I need help with a form please.
My form has two controls, the first being a combo box. This box should
select the company name from a lookup table. The lookup table has only two
companies in it, however, they each are repeated several time. Company 1 has
about 10 rows, company 2 has 3 rows. I used the query builder and came up
with the statement:
"SELECT DISTINCT Lktbl_Role_Master.CompanyName
When I run the statement directly from query view, it executes perfectly and
returns exactly two rows (one for each company, in a datasheet view) ho...PK and FK Displayed
I am a complete Visio newbie, and cannot find the answer I need in books or
I am trying to create ER diagrams from scratch, and not connected to real
tables, using VEA. I have added tables ('Entities') to the form, connected
them with a Relationship connector, and, in the Database Properties window
I've assigned the end points to a Primary Key on the left and a Foreign Key
on the right. But the model shows the connector as running between the top
colums on both sides, whereas I want the keys to be in that upper box and
provide the connector's end points. Wh...Formulas are displayed, results are not
Hello, For some reason, when I enter a formula into a cell and press
enter, the formula just stays there. Anyone know what I can do to show
I tried pressing Cntrl + `, but that didn't work.
FYI, when I cut and paste a column from a separate workbook, that
column works like normal (i.e., the formulas produce results).
Thanks for any suggestions!
Maybe your cell is preformatted as Text.
Try formatting to general then erase your =
and type it in again.
"Mike C" <email@example.com> wrote in message
news:f699bcd4-ad82-4a88-9759-5638c147b...Stop displaying a line
I have a line graph/chart and it gets its values using a formula and the values of another column. However this poses a problem because if there is nothing in the targetted column the formula returns 0 cause the line to drop to the bottom, instead of casuing the line to just end until a value is added to the target column. How can I do this?
Change your formula to use NA() if the cell is empty. For example:
To hide the resulting #N/A errors on the worksheet, you can use
conditional formatting. There are instructions here:
http://www.contextures.com/xlC...unattached textboxes disappear when a msgbox is displayed on a tab control
I'm using Access 2003.
I have a form with a tab control on it. I was having problems with labels
flashing and I followed the suggesting from Allen Browne -
The flashing went away but now when a msgbox is displayed the unattached
textboxes that I'm using as labels disappear. They come back as soon as the
msgbox is removed from the screen.
I've searched google looking for an answer but have come up short.
Does anyone know why I'm experiencing this behavior and how to make it go
That *is* strange. Have you tr...A question about Console window(display or not display)
I've redirected the (stdin stdout stderr) of a console window process
I spawned to a pipe.
And I want to display the redirected console window, the question is:
If I display it(set Create_new_CONSOLE in createprocess and some flags
in startupinfo), I cannot use the redirected way of pipe, which means
if i do not display, i can use the pipe communicating with the child
Does it mean that as long as I disply the console window, windows will
change stdin stdout to "screen&keyboard" instead of my pipe?
That's right. If you redirect stdin or stdout then you preemp...Display or not display series
I have a graph with four series but some of the series may
be blank, i.e. the series name is <blank series>. Is
there a way to not display these series on the graph
and/or legend if they are blank, and display them if they
are without deleting the series?
Create a chart from all the data
Select the data on which the chart is based.
In the heading cell for the series name column, select (NonBlanks)
from the dropdown list
The series with blank name cells will be hidden in the chart.
> I have a graph with four serie...does Excel support multiple display monitors?
Hello All Excel Experts
How do I move chart windows to multiple display montors?? (one
computer runnng three monitors... Excel Charts will not
move off the primary monitor.
Your advice is EXTREMELY appreciated
...Displaying an equation
I have an equation setup that is referencing a few other cells that have
equations in them. I want to have a cell that displays this equation with the
answers that are calculated from these other cells displayed as values in the
new equation. Any help would be greatly appreciated. Thanks
In article <E4143E2B-360A-4B43-955F-73BF8EC60694@microsoft.com>,
"hoising8" <firstname.lastname@example.org> wrote:
> I have an equation setup that is referencing a few other cells that have
A general query
Im serialising a person object with the following member variables
Private _forenames As String
Private _surname As String
Private _dob As Date
Private _marital_status As MaritalStatus
'Public Get and Set Properties here for each of the above
' I'll not detail them all to save space but Ill show attributes
<XmlElementAttribute(Elementname:="dob"...New Email does not display
When new email arrives you don't know it. You don't know you have new mail
until you click on an existing email in your inbox. Any ideas?
It's a setting. But...
1. You don't tell us the program you're using.
2. We can't guess if it's Outlook or Outlook Express.
3. This is the Excel newsgroup; you're in the wrong place. :)
"Travis" <Travis@discussions.microsoft.com> wrote in message
> When new email arrives you don't know ...Dynamic Chart Display
I have set up many dynamic charts using named ranges with the counta
function. At times when reopened the data is not displayed properly - it will
be skewed to the left with blank intervals although all data is there. It
can be corrected by going to the data sheet and resaving the spreadsheet but
this is very inconvenient and doesn't always work. This is particularly a
problem when the spreadsheet is for distribution or to be used as part of a
presentation. Does anyone know if there is a way to 'freeze' the display so
this does not occur?
...Display 4 weeks of data
I am trying to create a query in which data is displayed for the current
month beginning with the first day of the week, first week of the month and
ending with the last day of the week, last week of the month.
In example: Today is Friday June 1, 2007 but the first day of the week would
be Sunday, May 27, 2007. I would like the query to show data between
5/27/2007 through 6/30/2007 -OR- 4/29/2007 through 6/2/2007 for the previous
Does anyone have any ideas?
First day of the current month is DateSerial(Year(Date()), Month(Date()), 1)
Last day of the current month...net display or pole display
We are a small beverage/specialty retailer. We have a requirement to install
a customer viewable display.
We are using a Pioneer POS that has an available USB and video port.
1. We are thinking of using a small, 7-9" monitor connected to the video
port. Can we change the size of the fonts that are used to display pricing?
2. We tried hooking up a flat panel monitor to this port, but it didn't work
(even with the net display check boxes activated). I think it is because we
did not load drivers for the second monitor. We're a little apprehensive
about messing up the touch s...Arial Font not fixed pitch on display zoom <79%
In Excel 2000, if you use Arial font with a size of 10 pitch, with a View
Zoom factor of 79% or below it is displayed as a proportional font. i.e. the
number 1 uses less space than the number 8. If you use a zoom factor of
greater than 80% it displays as a fixed pitch font. Is there any way to make
the font display permanently as fixed pitch, regardless of zoom factor?
Arial is always proportional--maybe you meant courier new???
Maybe this post by Debra Dalgleish will help:
You can change a registry setting to prevent this from happening (make a
backup copy of the registry first):
1. ...Displaying zero as 1st digit in zipcode
I'm generating address labels (in Word) from mailing list that's entere
into Excel. The zip code is 07040, but it shows up in labels as "7040"
I followed the directions & clicked "zip code" in the "format cell
dialog box to format that column. I also tried entering it as text
zip code printed out as "0" only. I hope you can help - I'm working o
Message posted from http://www.ExcelForum.com
After you select your Excel file as a data source, you should see a
'Confirm Data Source' dialog box. From that...>1 hh displays in minutes. Display in hour+?
Sorry, I've looked everywhere, through google and all my saved
spreadsheets but I don't remember enough to have brought up any kind
of useful result.
I have a spreadsheet that is tracking time. I have the format set to
HH:mm:ss and enter 375000, for example, for a 37.5 hh workweek.
In the column that deducts for overtime, I have a couple of entries
00:74:00 would be better as 01:14:00 for 1 hour and 14 minutes, and
00:81:00 should display as 01:21:00.
How can we this be done pls? I don't see how to apply anything in
http://www.cpearson.com/...Account Overview report does not display subaccounts
I don't know if I am missing something here but it seems the Account
Overview report does not display subaccounts, even after I modify the
include/exclude drop down and refresh the report (or click on View
I would like to display a hierarchy of subaccounts for the selected
parent account. I thought that the Account Overview report was
intended to do that!
I've tried to change the "display as" field, but it always resets to as in
the "full name" field. (When I send to a contact, o nthe "to:" field ends up
showing the "full name", instead of the "display as" name I've tried to
save. What am I doing wrong?
Is there a way where I could assign "nick names", so it's easier to identify
contacts rather going through a list of the same first names or last names?
#1) Outlook version?
#2) How are you trying to change the Email Display As field?