Write XML File to Web Server File Problems

Hello All,

I am about to go mad because of the wonderful error messages that don't 
provide enough detail.  Below is the code I am trying to use to take an 
updated dataset and write it back to a file on a web server....


        ' Create WebClient
        Dim oClient As New WebClient
        oClient.Credentials = CredentialCache.DefaultCredentials

        'Create Output Stream
        Dim oStream As Stream = oClient.OpenWrite(sFileUrl, "PUT")

        ' Create the StreamWriter 
        Dim oXMLTextWriter = New System.Xml.XmlTextWriter(oStream, 
System.Text.Encoding.UTF8)
        oXMLTextWriter.Formatting = Formatting.Indented
        oXMLTextWriter.Indentation = 4

        ' Create XML Data Document with XML Declaration
        Dim xmlDoc As New System.Xml.XmlDataDocument(dsSource)
        xmlDoc.DataSet.EnforceConstraints = False
        Dim xmlDec As System.Xml.XmlDeclaration
        xmlDec = xmlDoc.CreateXmlDeclaration("1.0", "UTF-8", Nothing)
        xmlDoc.PrependChild(xmlDec)

        ' Write XML Document to Server
        Try
            xmlDoc.WriteTo(oXMLTextWriter)
        Catch ex As Exception
            DisplayError(ex)
        End Try

        Try
            oXMLTextWriter.Flush()
            oXMLTextWriter.Close()
        Catch ex As Exception
            DisplayError(ex)
        End Try


   However, when it gets to the 'oXMLTextWriter.Close()' code, I receive the 
following exception...
"The remote server returned an error: (501) Not Implemented.".

What does that mean and hope to I get this to work?  I have authority of 
full control on the folder to where the file resides, so I do think it is 
authentication.

Thanks in advance.

Dean
0
8/31/2007 6:02:03 PM
dotnet.xml 7266 articles. 0 followers. Follow

2 Replies
502 Views

Similar Articles

[PageSpeed] 52

Dean Hinson wrote:

>    However, when it gets to the 'oXMLTextWriter.Close()' code, I receive the 
> following exception...
> "The remote server returned an error: (501) Not Implemented.".
> 
> What does that mean and hope to I get this to work?  

That is a HTTP error message telling you that the PUT method you are 
trying to use is not implemented:
   <URL:http://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html#sec10.5.2>


-- 

	Martin Honnen --- MVP XML
	http://JavaScript.FAQTs.com/
0
mahotrash (1778)
9/1/2007 11:37:38 AM
Well, I finally figured it out.  Based on other postings and googling, the 
WEBDAV under web service extensions was not allowed.  I chamged that to 
allow, and all is fine.

Thanks for your reply.

"Martin Honnen" wrote:

> Dean Hinson wrote:
> 
> >    However, when it gets to the 'oXMLTextWriter.Close()' code, I receive the 
> > following exception...
> > "The remote server returned an error: (501) Not Implemented.".
> > 
> > What does that mean and hope to I get this to work?  
> 
> That is a HTTP error message telling you that the PUT method you are 
> trying to use is not implemented:
>    <URL:http://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html#sec10.5.2>
> 
> 
> -- 
> 
> 	Martin Honnen --- MVP XML
> 	http://JavaScript.FAQTs.com/
> 
0
9/4/2007 12:08:00 PM
Reply:

Similar Artilces:

XML Custom serialization
Hi all, I want to serialize a class in a customized way. But I don't want to implement the ISerializable interafce because I don't want to take care of every new field I insert to the class. What I need is a way to customize the serialization of a specific field in my class but leave the rest to the build-in serialization. Any guidance will be appreciated. Ro'ee <sfa.roy@gmail.com> wrote in message news:7243a1eb-3fa3-43e0-8339-d90f890e6716@b1g2000hsg.googlegroups.com... > Hi all, > > I want to serialize a class in a customized way. But I don't want to >...

Is there a way for Windows Service to Read/Write HKCU Reg key ?
Hi: I'm writing a Windows Service program which needs to read/write the HKEY_CURRENT_USER registry key for the current logged on user. I know that for a Windows service does not have concept of HKCU since it is always running in SYSTEM's context. But is there a way (trick?) for a service to access the HKCU registry key? Thanks In Advance ! Polaris Hello Try, from a user application (the one that is logged on, or the current user), to send the services the user's SID. Then access the HKCU through HKEY_USERS\users_sid\............ Hope that helps, Elias "Polaris&qu...

Macro Help- combining "CS" files
Below is the macro I have to go to a certain file and combine all spreadsheets. I did not write this macro myself. I just received it and modified it to work for my situation. When this maco is run it gets to the first file and says I cannot change a read only file and says I must unprotect the worksheet. This sheet is not protected but I really only want to copy the info on it anyway. Is there a way to modify this macro to copy the information. I could save all of the "CS" files as new files but that would defeat the purpose of automating this job Any help is greatly a...

multiple OWA web sites on single server?
Hello, I would like to know if it's possible to have multiple OWA web sites on a single server. Reason I need to know is that we would like to use RSA's securid for OWA but not everyone that uses OWA will be using securid. So I would like to have 2 OWA websites, one using securid and the other not. We are using Exchange 2003 server. Thanks! FC You can have 2 web sites on the same server by 1) using the same ip address but different ports 2) using different ip address and default ports (http 80 or https 443) or 3) same ip address and ports, but using different fqdns as host...

Import data from DBF files
What's the best way to import a large dbf file into Access (records from a DBase file)? I have one dbf that has over 220,000 records in it. It gets to about 75% and says "The search key was not found in any record." Everything is patched to the max (Windows, Office, Jet, etc). This doesn't happen with any other dbf file, but they are all smaller. Also, oddly, I can copy and paste 50,000 records in a shot and paste them through a query, but I don't want to keep doing that for every large dbf I have. The Access tables have no problem holding the data, just transf...

Outlook Send/Receive problems when separating imap.pst from default location
We are having a problem when using Outlook 2002 upgraded from 2000. Using IMAP as the only mail account the Send/Receive button no longer works (for some users - not all users). I know all about the default local folder (Outlook Today) Inbox issues having to be the default but this one is that it won't automatically check for message and the Send/Receive button doesn't work when splitting out the email.pst file (again this only affects some users). This happens when we separate out the email.pst file from the default Documents and Settings folder. We didn't want all the cached ...

Write
I am trying to change the default margins. I am requested to use the Write mode to do this. What is Write, and how do I access it? Are you using voice recognition? Margins are simply changed in the Arrange Menu in Publisher. Are you in the right newsgroup? -- Mary Sauer MS MVP http://office.microsoft.com/ http://www.mvps.org/msauer/ news://msnews.microsoft.com "CBC" <anonymous@discussions.microsoft.com> wrote in message news:183bb01c44a40$107bd5d0$a501280a@phx.gbl... > I am trying to change the default margins. I am requested > to use the Write mode to do this. W...

"File not found" and "The form name is misspelled..." errors
I am still bulding a database. It contains no data, and contains no embedded macros. Yet, when I go to build code, I get these errors: "File not found" followed by "The form name * is misspelled or refers to a form the doesn't exist" The problem does not lie in the form that automatically opens when the database opens, and there are no embedded macros (I've read that these are the two main places an error such as this can occur). I did a search in the code box, and do find the two subforms listed even though neither contains any kind of code. I ca...

pst files and VPN issues
I'm looking for suggestions on how to configure .pst files for remote users who access a network using VPN. Due to the large size of these files (often over a gigabyte), Outlook's performance is seriously affected and often freezes during the archive process. What are your company's polices for remote users accessing .pst files and is there a way short of saving them locally to access them without affecting Outlook's performance? If the .pst has to be stored and backed up locally, does anyone have security advice for protecting .pst files with sensitive material? Encrypted f...

insert .dxf files
Hi, Anyone knows how to insert .dxf files into power pt 2003. i'm able to do it on power pt '97. or perhaps point to where i can add the filters in thks in advance :) -- it''''s not the eye that is blind, blind is the eye within the bossom In article <3CBADB93-1D61-47A1-90AB-9DDA49A5C42A@microsoft.com>, Ssa wrote: > Hi, > Anyone knows how to insert .dxf files into power pt 2003. i'm able to do it > on power pt '97. or perhaps point to where i can add the filters in Normally, Office's graphics filters are stored in: C:\Pr...

exchange 5.5 problem #2
When we send some messages to our outlook user s on an Ex 5.5. server we encounter the following problem. Message were send via the internet. Messages were bounced with error message "Unable to deliver the message due to a recipient problem" The strange thing we've seen is that the problem only pops up in a multi server site. Further we see all users on the primary server (with the Inter Mail Service) do recieve the email. All other users on the other servers don't recieve the message. The transport from the primary to the other servers is based the MS RPC protocol ...

adding animated swf file as background.
hi. I am developing a s/w in VC++. it is loaded with heavy UI. now my client want me add a animated flash file(swf file) as a back ground. if any body knows how to do it, please tell me. thanx in advance. Regards, Harshad. ...

SHRINK/REDUCE EXCEL FILE SIZE
Hi Friends, A useful post on reducing the excel workbook size. This may reduce the file size dependently from 10% to 500% . http://www.excelitems.com/2010/11/shrink-reduce-excel-file-size.html ________________________________________ Thanks & Regards Ashish Jain (Microsoft Certified Application Specialist) (Microsoft Certified Professional) http://www.excelitems.com http://www.openexcel.com ________________________________________ ...

CSV to XML, now to validate
hiya, I have a 3rd party function that converts a CSV to an XML doc. I now need to validate the xmlDoc.I understand that I need a valid XSD for the newly created xmlDoc, but the xmlDoc contains no schema definitions etc.I'm not sure how to create an XSD, so that the fields are restricted to "integer" datatypes etc. Been looking for a while.I assume that I don't have to manually write an XSD?maybe I should create a "dummy" table in sqlServer, then generate a dataset to get the XSD?Or, maybe vis studio 2003 has tools to make this easier? Any suggestions appreciated...

Writing formula for excel worksheet
Item Rate1 Rate2 Rate3 A 3 4 6 B 8 5 23 C 56 5 78 Above is my excel sheet. I want to write some formula so that in every row cell having minimum rate should come bold. Like For Item A - Rate1(3) for Item B - Rate2(5) For Item C - Rate2 (5) There may be a neater way but this works. Somewhere in you sheet in a cell type =min(A1:a4), I used L1 Change this to watever range you are trying to evaluate. Then select this range and click format - conditional format - cell value - is equal to =($L$1) and apply your bold font. The lowest value in the range will then become bold. Mike "Gaur...

write protect/write redirect/kios mode
Hey, I LOVE snapshots in virtualmachines and think it would be awesome to have something like this for my main windows install. Anyone know of any hardware/software to redirect writes to another drive/file/memory/hardware? Or hardware to write protect a drive for kios's (i found some once befor the reverted all changes on shutdown, but cant find it anymore ><) I know VSS(virtual shadow copy service) has a function to redirect on write and wondering if i might be able to use that :/ It will just make everything cleaner, and give alot of flexiblity to setting up ...

How to get the sectors/clusters of a particular file?
Hi, How to get the sectors/clusters of a particular file? I am working on Windows 2000. Hoping to get a reply soon. TIA. regards, Jahfer V P. No particular way I know of. If you have certain privileges you might be able to use DeviceIoControl(), but there isn't much you can do with this information. joe On Mon, 20 Jun 2005 23:33:02 -0700, "Jahfer V P" <JahferVP@discussions.microsoft.com> wrote: >Hi, > >How to get the sectors/clusters of a particular file? >I am working on Windows 2000. > >Hoping to get a reply soon. >TIA. > >regards, &g...

XSLT: Creating anchors from outer XML files
Hi, I'm trying to put the links (href attribute of the <a> element) out of my XSLT files, in a XML file, and read it from the stylesheet. I suppose that I have to use the document() function to link to the XML file containing the URLs, but I don't know how to do it. I've tried something like this: This is XML file containing the URLs (link.xml): <?xml version="1.0" encoding="utf-8" ?> <LINKS> <L1> /SomePage.aspx </L1> </LINKS> And this is the code from the stylesheet: <a href="{document('link.xml')/L...

How to replace two system files?
I have an XP machine. Have just replaced a couple files from a W7 machine. The files are:- c:\windows\system32\drivers\disk.sys c:\windows\system32\drivers\partmgr.sys ....and now I can't boot the XP machine. How to get back to before I replaced the files? Thanks. "John Smith" <JohnSmith@nospam.com> wrote in message news:uLL8mqL0KHA.264@TK2MSFTNGP05.phx.gbl... > I have an XP machine. Have just replaced a couple files from a W7 machine. > The files are:- > c:\windows\system32\drivers\disk.sys > c:\windows\system32\drivers\partmgr.sys > ....

Problem with AND function
I'm using the function as shown below =IF(AND((COUNTBLANK(O14:AE14)<17),L14>0),N14*L14, "enter project") essential =IF(AND(TRUE, TRUE), do this, else "enter project" however, I'm getting "enter project" even if only one of the options is TRUE. I thought the whole point of AND was that BOTH had to be TRUE? Any ideas??? Excel 2003 Think it over: if both condition is TRUE then AND is also TRUE, but if only one of the conditions is TRUE then AND becomes FALSE and your formula returns "enter project" which is right. I t...

Cannot open .msg files saved from Outlook to network share
Some of my users have dragged and dropped emails into their network shares creating .msg files. When they try to open some of the files they get the following popup: 'The messaging interface has generated an unknown error. If the problem persists, restart Outlook.' This only happens for some of the saved emails. They are using Outlook 2000 from Office. God only knows why they did this and didn't use autoarchive! How many training sessions does someone have to do?! Anyway, anyone know how I can open them or even better, why I cant? Regards Dave ...

Cannot write to memory location
I can not (all of the sudden) run Publisher in the last week. When starting to run it, I get that it cannot write to a certain memory locaiton, so it is shutting down. I need to get this program working. I have read through this forum and tried the different fixes as well as the knowledge base (emptied the temp file, disabled anti-virus, etc.) but it still won't work. An example is: "The instruction at "0x77f585c0" referenced memory at "0x00000000". the memory could not be "written". Click on OK to terminate the program." The header read...

deleting temp web files
When I delete the temporary internet files with the Iexplorer menu of Tools->InternetOptions->General->DeleteFiles Does this delete said files only for the current User account logged on? Or does it delete said files for all user accts on machine ? Just the current user I think. neil "RB" <NoMail@NoSpam> wrote in message news:#FNlBGX3KHA.1016@TK2MSFTNGP02.phx.gbl... > When I delete the temporary internet files with the Iexplorer menu of > Tools->InternetOptions->General->DeleteFiles > Does this delete said files only for the current...

how do i write checkbox to.....
This is a multi-part message in MIME format. --------------050607000103070200020407 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit how do i write checkbox1 boolean to xml in vb6 i can only do cstr( checkbox1.value) but in vb.net can't write to xml. i am doing irc chat similar to mirc or pirch chat. rw.WriteConfigInfo("User Modes", chkInvisible.Text, chkInvisible.Checked, "PirateChat.xml") in procedure events: ' Both the Key and the Value are filled ' Find the key ...

xml to flat file
Hi. Is there any way of using an xml schema file to a. validate the xml data then writing the xml out as a flat flat. For example in the schema it would say the element has a maximum length of 10 characters and therefore when it is written out as text the value is 10 characters ? <field1>hello</field1> <field2>all</field2> flat file would be hello_____all thanks ...