Kernel debugging not working1738 (11/17/2009 5:36:17 AM) UtfFor my kernel debug session, I am connecting WinDBG over a serial cable to a
new Dell Optiplex 360 running XP and WinDBG never connects during a reboot of
the target. The serial port is Com1 on the motherb...
windows drivers theoretically2424 (11/13/2009 9:46:01 AM) UtfHello,
I try to learn a bit about driver development for windows.
I need to sort information which I have about driver development in Windows.
Particullary, I'm interested in NDIS drivers, but my question...
ACPI driver - doubt1428 (11/12/2009 9:23:22 AM) JohnHi
I want to change the CPU speed ( increase/decrease CPU performance )
based on CPU loading using ACPI driver. I got one sample driver
(wmiacpi) from wdk. But i can't understand, how can i control the cpu...
How expose multiple MBN interfaces?0448 (11/16/2009 4:41:03 PM) UtfOur Windows 7 mobile broadband USB adapter may keep multiple broadband
connections at any time, to multiple mobile broadband providers/networks.
What is the best approach to expose multiple network connect...
Intercepting memory accesses13646 (11/13/2009 2:18:02 PM) UtfI want to get some idea of how to approach the following problem.
I'm very interested in being able to intercept read/writes from/to mapped
memory pages, be they resident in physical memory or paged out to...
COM port driver inf issue4665 (11/13/2009 7:13:01 AM) UtfIn our setup, we have two COM port devices. One is LPC to UART device(COM2 to
COM5) and other one is Super I/O's UART(COM1).
I need to install two different for these device due to baud rate mismatch.
Unit testing of WDK driver utility DLL function4808 (11/11/2009 3:27:39 AM) UtfI am at a loss rigth now!
I have a utility DLL for a Port monitor compiled with the WDK and want to
write Unit tests for exported functions in VS 2008. When I am linking the LIB
in VS and compile the Unit ...
Reloading WDDM Display Driver Without Reboot2649 (11/10/2009 4:23:03 PM) UtfDoes anybody know how to reload a WDDM display driver on Vista without having
to reboot? On XP with XPDM I used the ChangeDisplaySettings API to switch to
VGA mode and then back to accelerated mode. The sam...
32 byte CDB1850 (11/11/2009 10:14:53 AM) VijayHi All,
I want send Passthrough commands which are 32 byte like Read-32 (SCSI
Block command - section 5.11)
Both SCSI_PASS_THROUGH(defined in ntddscsi.h) and SCSI_REQUEST_BLOCK
(define in srb.h) structu...
Re-partitioning (or re-sizing) Compact Flash3446 (11/11/2009 8:40:13 PM) cpnetI'm looking for info on how to write some code that will allow a user to
re-partition or at least resize the partition of their Compact Flash cards.
I'm not sure this is the best newsgroup for this question...
Creating Driver Package1604 (11/11/2009 1:10:02 PM) UtfHi All,
I have been using the Jan Axelon WINUSB c# sample from his
using this , the driver shall be install if it connected.
How to create the driver package for this.
IOCTL_HID_READ_REPORT is not called continuosly0902 (11/12/2009 2:36:01 AM) UtfHi
I am developping the HID minidriver for multi touch device based on
hidusbfx2 sample. I modified report descriptor and hid descriptor on source
according to our device and the driver are installed suc...
API OpenProcess Blocking1551 (11/11/2009 11:25:36 PM) MathieuHello
Remember that I post the question on API writefile in blocking
the framework to map a logical drive in an image file management through
a process in user-mode by an intermediate of my driver.
QueryPerformanceCounter() kernel mode equivalent1598 (11/11/2009 7:39:02 PM) UtfIs there a QueryPerformanceCounter() equivalent function that copies the
CPU's free running 64-bit counter to a memory location? Have used it in DLLs
for years, but not certain if this function is okay in ...
Static and Dynamic Enumeration4662 (11/10/2009 1:18:06 PM) ubaHello Experts,
I'm understanding static and dynamic child bus enumeration in KMDF.
When I plug-in a USB mass storage device to a PC, I see two devices
being shown in device manager, one under "Universal Se...
Smartcard Driver Issues0752 (11/10/2009 1:36:02 PM) UtfHi I'm developing Smart Card Driver that my hardware is Reader and Card
incorporate together and I send the T=1 commands using our own Protocol and
Hardware. So I develop a Software Smart card Driver accord...