Setting Right margin in Onenote 2010
Onenote 2010 is great but I haven't figured out how to set the right
margin in a note.
Here is a screenshot shpwing the problem. I would like to set the
margin closer to the right side of the page.
When I click on a text box, i can't seem to widen it.
When I go to View|paper Size, I want to use Auto paper size so the
note keeps growing in length. When I select this option, all the other
boxes are grayed out.
Any help appreciated.
On Mon, 12 Apr 2010 14:37:53 -0700 (PDT), Bob <email@example.com...List of Categories in Outlook 2010
Is there any way of getting a printable list of categories assigned in
Microsoft Outlook 2010?
e.g. to allow the list to be fine-tuned and or for colleagues to also
have the same categories available
I would do a print screen, personally.
The following macro in Outlook should work to produce a list of categories
in a Word document.
Set a reference to the Microsoft Word object library in the vba editor
(Tools > References).
Although aimed at Word the principles shown at
http://www.gmayor.com/installing_macro.htm apply to Outlook also should you
not know what to do with macro lis...argh email backup recovery
ok so I have standard NTbackups of my sbs 2003 installation.
I have email for my 3 users stored in the backups no problem and have been
able to extract the emails (I had to do a fresh install of everything except
the emails for unrelated reasons).
So in my \sbs\first storage group\mailbox store are the 3 new email boxes
and people are able to access them fine.
I also have the 3 old mailbox stores that I have restored to the server as
I've tried to merge old emails via exmerge or recovery storage etc but it
keeps complaining that the active directory doesn't match.
Can anyon...What about DPM 2010 Rc
Anyone use 2010 RC in a production environment?
I've put it on a VM to look at it, and it would be nice to use it in
My Number 1 Reason To Upgrade
>>> Can Disable Daily Tape Backups for Saturday and Sunday
What's your reason(s) for upgrading?
How is it working out for you?
Yes. 6 protection groups, 10 servers, 20 vms on a 6 node hyper-v cluster with
csv. Runs great. A few quirks here and there but overall great. A far cry
from our last backup solution. I basically set it and forget it. Check it
when I get in to the office in the morning.
...Are ribbons created in Word 2010 backward compatible to Word 2007
I understand that creating tabs/ribbons in Word 2010 is much easier than in
word 2007. Are they backward-compatible from Word 2010 to Word 2007?
...DCM for DPM 2007 and DPM 2010
Does anyone know if a DCM pack is available for DPM 2007 and DPM 2010?
If you are looking for System center configuration management pack
for DPM 2007 and DPM 2010 they are available for DPM health monitoring. If
you want DPM 2010 Management pack please mail me at
praveend-at-microsoft-dot-com. The closest answer to DCM pack for DPM would
be DPM's Best practice analyzer guidelines which can be downloadable from
Praveen D [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.
"John H" <JohnH@di...DPM Console crash
In our DPM setup we have a created a filter to disable the weekend back-up.
It was working fine till a couple of weeks a go. Now when we want to change
the date in the filter the DPM console crashes.
Does anyone has a solution for this problem? Witch errlog should we
You can look at the error logs for UI at:
DPM Install location \ temp.
Paste the error logs excerpt about exception here or send the error logs to
MICROSOFT [DOT] COM
Thanks and Regards
This posting is provided "AS IS&...Outlook 2010 Beta access to internet
I just downloaded and installed Office 2010 Beta. Everything appears to work
normally except that Outlook can't access the internet unless I turn off my
firewall. I am using Windows live One Care. Can anyone explain and help?
Thanks for your help
Recreate the exception for Outlook to pass through your firewall.
Robert Sparnaaij [MVP-Outlook]
Coauthor, Configuring Microsoft Outlook 2003
Outlook FAQ, HowTo, Downloads, Add-Ins and more
Real World Questions, Real World Answers
"LesHurley&q...Backing up CCR Passive node with DPM (block level)?
Hello Please check the link from the technet forums I posted.
Suggested to check out the new threads instead. Basically there is an option
in DPM to always choose the passive node in a CCR cluster. I've heard there
is a problem though where a consistency check is required and it can transfer
up to 90% of the data.
Why is DPM doing a block level? Isnt it easier to just check the log files
and the database files instead? I'm not an exper...DPM to DPM untrusted
I'm trying to find out if in DPM 2010 a DPM to DPM backup is supported
across untrusted domains? From my reading it appears to not be supported but
this is a pretty common/useful scenario for a number of companies.
If this is supported can the one DPM server backup multiple DPM servers from
multiple untrusted domains?
One way to solve this is by establishing a two way trust between the DPM
machines domains. But protecting two different servers without trust between
the servers domains in not supported. We will consider this in future DPM
releas...unable to back up using only tape (without disk) with secondary DPM
I have setup a secondary DPM with only tape capabilities (no disk available).
When I tried to create a new protection group on the secondary DPM, I unchecked the short term option (disk) and only select the long term option (tape), the "Next" button will get greyed out.
Any ideas why is this happening? It happens to all except when I try to protect the Primary DPM or protect itself (secondary DPM).
Submitted via EggHeadCafe - Software Developer Portal of Choice
C# .NET Windows Task Scheduler
http://www.eggheadcafe.com/tutorials/aspnet/9f75423c-4849-4866-ad48-8fbd2ed2ed88/c-...New Server for Dynamics 2010
We currently have Microsoft Dynamics 9.0 runnings on an SBS 2003 server and
SQL 2000. We are going to buy a new server, which will be a member server to
our SBS 2003 server. The new server will be running Microsoft Windows Server
2008 R2 64-bit. We want an 64-bit version of Microsot SQL and the
recommended version is SQL Server 2008 R2 Standard 64-bit. Will Dynamics 2010
run on Microsoft Server 2008 R2 Workgroup 64-bit?? We only have 4 users and
probably do less that 250 transaction per day.
Any information concerning specific configurations can be found on the
Mic...DPM Consistency Check
I have a 735 GB volume I'm using DPM 2010 on. If I throw it a do a
consistency check......it been running for over 5 hours. I plan on
protecting a larger file server with millions of files and over 4 TB of data.
How long can I expect a consistency check to take? If a consistency check
takes days...what happens to my backups?
The time to complete a consistency check depends on the change rate for the
data, the available network bandwidth, and the time that has passed since
the previous successful synchronization job.
Here is a good reference chart:
http://technet.micro...Outlook 2010 and MAPISVC.INF
I installed Outlook2010 Beta on a Win Vista Enterprise 32-bit system.
Well, I am looking for the MAPISVC.INF file, but I can not find it. Where it
Why do you need it?
I have it at C:\Users\username\AppData\Local\Microsoft\Outlook here.
Diane Poremsky [MVP - Outlook]
Outlook Tips: http://www.outlook-tips.net/
Outlook & Exchange Solutions Center: http://www.slipstick.com/
Outlook Tips by email:
EMO - a weekly newsletter about Outlook and Exchange:
mailto:EMO-NEWSLETTER-SUBSCRIBE...Microsoft Office PowerPoint 2007 (KB982158) fails with 2010
I am running Microsoft Office PowerPoint 2010 on my laptop. For some reason
my machine keeps trying and failing to install Security Update for Microsoft
Office PowerPoint 2007 (KB982158).
The failure code reads: "WindowsUpdate_80070643" "WindowsUpdate_dt000"
Due to this problem, my work security policy will force me off the network
while working remotely.
How can I fix this problem? Especially since I am running 2010 and not 2007,
which is what the KB was written for.
See the "How to obtain help" section of, e.g.,
http://support.microsoft.c...Excel 2010 fails to save or open from network drive
In Excel 2010 I receive the following error message whenever I try to open or
save a file to a network drive:
Microsoft Excel cannot access the file "C:\Temp\Content.MSO\8A68000
*The file name or path does not exist
*The file is being used by another program
*The Workbook you are trying to save has the same name as a currently open
I have full permissions to read/write/delete to the network drive as well as
This happens both on a windows XP sp3 and Windows 7 system.
I do not have the save/open problem in Microsoft Word 2010...windows 2008 system state error on primary dpm server
I have two dpm servers, one primary and one secondary. Secondary backs up
the primary. Primary server is disk only, Secondary is tape only. Both are
windows 2008 x86 running the latest dpm fix pack. When the 2ndary backs up
the primary DPM server system state it fails with an error. I also cannot
perform a system state of the primary DPM server from the windows backup on
the server either. Both have just been rebuilt, all partitions wiped,
recreated. Below are the two errors....Any thoughts?
Log Name: Application
Date: ...DPM to DPM replication issues
Have a DPM 2007 sp1 server [with hotfix for HyperV] replicating to a 2nd
(offsite) DPM 2007 sp1 server. I am trying to backup full VHD's (agent
running on 2008 server that is running hypervisor). These vhd files are all
larger than 50 gb and one is 600gb. we have a 5-10mb upload - and plenty of
bandwidth at our colo.
main issue is our file server backup, it is about 650 gb of total vhd files
that i was able to get consistent once but after a failed backup it is
inconsistent again. have tried a few times to run consistency checks but
after a few 100 hours they get intur...DPM 2010 End-User Recovery UI
In my test environment I'm trying to configure the following:
DPM 2010 RC server is in domain A
My client workstation (windows 7) is in domain B
The client backup works fine, I can recover on the DPM server, I can recover
on the client through Previous versions without any problems
However, in the Client DPM UI, when I go to Recover, I get the following
"DPM found no recovery points which you are authorized to restore on the
specified DPM server. You can restore only those recover points for which
you were an administrator at the time ...."...DBTYP.NET Studio 2010
DBTYP.NET Studio 2010 - Database Comparison Suite Released
Vienna, Austria - March 8, 2010
Today, BYPsoft announced the availability of DBTYP.NET Studio 2010, the
newest version of the cross-database comparison tool that compares SQL
Server, MySQL and Oracle databases (schema and data). DBTYP.NET Studio 2010
is available for download from http://www.bypsoft.com.
With its rich support for schema and data cross-database comparison,
DBTYP.NET Studio takes the mystery out of databases, making their comparison
practical and easy for programmers and database administrators everywh...Upgrading to 2010.
I have just began to look into this. We have a license for Exchange Server
2010 Standard Edition. We currently have exchange 2007. Should I upgrade?
On Thu, 1 Apr 2010 13:07:54 -0600, "Brian" <firstname.lastname@example.org>
>I have just began to look into this. We have a license for Exchange Server
>2010 Standard Edition. We currently have exchange 2007. Should I upgrade?
Look at the features in 2010. Do you need to move to 2010? What
business case would be satisfied by moving to 2010?
Our exchange server is in poor shape and needs to be rebui...Problem upgrading DPM 2007 to DPM 2010
We've disconnected the HD-cabinet with the DPM volumes and started
installing Windows 2008 x64 on two new harddisk. It all went fine until
we re-connected the HD-cabinet. Windows 2008 added all left over drive
letters starting from D: to Z: and connected these drive letters to the
DPM volumes. When removing one of the drive letters, the system got
unresponsive and after 15 minutes I had to reset the machine.
Can this behavier, automatically adding drive letters to DPM volumes
when connecting the HD-cabinet, be prevented?
Thanks for your reply.
OS upgrade assigns drive l...outlook 2010 and deleted items folder
I can't activate and *show* the "Status Flag" column in the bin: is this
normal or not?
/-\ /\/\ /\/\ /-\ /\/\ /\/\ /-\ T /-\
-=- -=- -=- -=- -=- -=- -=- -=- - -=-
>>>>> http://www.bb2002.it :) <<<<<
............ [ al lavoro ] ...........
...DPM 2010RC Adding Disks to DPM Manager
I have an 11TB Raid on my DPM server. It is GPT and formated NTFS. I can add
the drive to DPM via DPM Managment, however it tells me it has 0KB of free
space. Am I missing something simple here?
It shouldn't be formatted, no drive letter either. You should see it in
diskmgmt.msc, but not in My Computer for example. Then add to DPM pool, DPM
will format it when it creates volumes for your different workloads or
Hope that helps, I seem to remember that some time ago.
Can you pls give information of excel 2010 objects.or any links.
> Dear Experts
> Can you pls give information of excel 2010 objects.or any links.